Save. Share. Connect.
Tuesday, February 21, 2017
VOLUME -23 NUMBER 7
Publication Date: 07/1/2008
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Feature: Assembly and Packaging
Product Preview: Semicon West
July 2008 Issue
Electronic Mfg. Services
Add Message Board
Streamlining Aftermarket Fulfillment Increases Efficiencies
Multi-layered IT structure is at the heart of the Gardner Denver pick system.
By Patrick Roberts
For any large industrial manufacturer handling 13,000 SKUs in its assembly parts warehouse, it is no small organizational challenge to keep production requirements satisfied without a hitch. But, integrate into that system a full-scale aftermarket fulfillment distribution center with 80,000 additional active SKUs needing to be processed simultaneously, and you have the recipe for a potential logistics meltdown.
In the fall of 2005, Gardner Denver, Inc. completed the integration of its large, dedicated aftermarket fulfillment center into two of its production facilities, pulling off the transition in record time and without missing a logistics beat.
The company builds large pumps, compressors and blowers for industrial use. It is a leading global manufacturer of highly engineered reciprocating, rotary and vane compressors, liquid ring pumps and blowers for various industrial and transportation applications, pumps used in the petroleum and industrial markets, and other fluid transfer equipment serving the chemical, petroleum, and food industries. Its products and engineered solutions are sold through multi-channel, worldwide distribution systems and are used for applications in virtually every market sector, ranging from industrial movement to environmental processes, to healthcare applications and energy production.
The company has a tremendous installed base of equipment in manufacturing plants throughout the world, going back almost 150 years when Robert Gardner provided the first effective speed controls for steam engines back in 1859.
Making the Switch
Gardner Denver maintained a dedicated aftermarket distribution warehouse in Memphis, Tennessee which handled its aftermarket parts fulfillment for the domestic manufactured compressor, blower and pump products. The company would manufacture aftermarket parts in its other plants, ship the parts to Memphis where they would be inventoried and then sent out to customers. This system had been utilized for the past 20 to 25 years.
There were potentially sizable benefits, however, to having the company's aftermarket distribution coming from the production facilities themselves, where the parts were actually being manufactured. Gardner Denver conducted an assessment of its assembly parts needs for its manufacturing facilities, its aftermarket parts needs, and lead times required for managing its inventory level.
The two plants designated to absorb the aftermarket inventory and distribution activities were the company's facilities in Sedalia, Missouri and Quincy, Illinois. Both were exclusively production plants, Sedalia manufacturing rotary screw and industrial blowers, and Quincy manufacturing reciprocating compressors and pump products.
Each of the plants already maintained a warehouse for supplying parts needed for assembly. This was now to be expanded and integrated to handle both assembly parts inventory and aftermarket parts warehousing and distribution within the same system. The company's Memphis DC had automated picking carousels previously designed and built by Remstar International (www.remstar.com) that were used strictly to fill aftermarket orders. The DC would receive an order from a customer for aftermarket parts, the picking carousels would house them and the orders would then be picked and shipped out to its customers. Because this picking system proved quite successful in handling the large-volume of 80,000 different parts — mostly small components — in the distribution center, the company asked Remstar to again design and build picking systems to accommodate its new warehouse needs in its Sedalia and Quincy manufacturing plants.
"Remstar was intimately familiar with the Memphis site, they visited the Sedalia and Quincy locations and saw what we were doing, and what our vision was," says Dean Chew, Director, Aftermarket with Gardner Denver. "They came back to us with a complete solution, a comprehensive plan. From the pick system carousels to the conveyers, the interface software between the conveyors and the carousels, the warehouse management system and the integration with our enterprise resource planning system, this was a turnkey project."
"They manufactured and installed the carousels, and some of the peripherals like pick-to-light," Chew continues. "Remstar also provided the project management on the conveyors which were manufactured by Intelligrated, the WMS software from Innovative Automation, and the mezzanine structures manufactured by Wildeck." "Remstar started with the planning work on Quincy in May, and by July initiated site work by dismantling our existing picking system," Chew explains. "The system in Quincy was completed by September. The time frame to deliver the project was extremely short, a typical process would have taken twice as long. What would normally have been a six- or seven-month project, Remstar did in four months. The second phase, in Sedalia, was completed in October. These were really incredibly short time frames."
The picking systems put into place at the Gardner Denver plants needed to serve two purposes: (1) The distribution of spare parts to end users; and (2) the assembly of pick kits to feed the manufacturing floors. Such solutions tend to be quite challenging, and are unique in material handling applications. Remstar was able to design a highly-workable solution incorporating both needs into a common picking system.
Quincy, the smaller of the two systems, handles approximately 5,000 SKUs between its manufacturing and aftermarket parts requirements. For this operation four Remstar-designed pick carousels were put into place.
Sedalia supplies roughly 75,000 different parts for its manufacturing and aftermarket requirements. Its picking infrastructure consists of ten Remstar carousels supported by a double-tiered mezzanine — five carousels above and five below. Remstar horizontal carousels are a system of carriers that rotate on an oval track, delivering stored items to an operator on command. The high-density design of these systems uses 40 to 60 percent less floor space and 80 percent less cubic space than traditional shelving. Sedalia had a large amount of bulk rack that was replaced by the carousels, with a considerable recapturing of floor space. "In our Sedalia and Quincy plants we now simultaneously do the functions of aftermarket fulfillment and production floor kitting that we did separately before," says Chew. "The production line needs parts to build a compressor or blower, so they enter an order which goes into the carousel, it gets picked and put on a tote, then conveyed down to a workstation on the production line where those components are assembled into a product. For aftermarket, the parts get picked, put into a tote and conveyed on a different line out to shipping. Both are the same process of filling the order with similar parts, except they go down separate conveying spurs to different end points."
The picking carousels utilize state-of-the-art put-to-light and pick-to-light technology which assists the picking operators with four basic functions: (a) picking a specific or active item; (b) putting an item in an active order or location; (c) communicating a message such as a quantity and description; and (d) completing the task and moving on to the next.
Zone Batch Technology
Remstar combined pick-to-light and put-to-light, with pick-and-pass zone technology to maximize picking efficiency. Multiple orders are positioned above an LED display. The carousel is pre-positioned so the picker is never waiting on it. All of the orders are automatically downloaded, so when an operator begins the batch pick process, the software shows the first available pick. The product is pre-positioned. The light comes on underneath each product to be picked, indicates the quantity to be picked, and that quantity will fill the need for all orders in the batch. The picker then goes to the next carousel, which is already in position and continues the process. Pick-and-pass order fulfillment allows an order to be consolidated while picking directly onto the shipping totes. Batches then move from work zone to work zone, bypassing zones with no picking requirements. As batches of orders are completed they are routed to the next required workstation until complete and sent to shipping, or to the floor for assembly. Pick-and-pass zone batch picking is one of the most effective split-case picking methods.
"The whole system is quite automated," Chew continues. "The coordination of order fulfillment is remarkable; parts are put in totes, which are sent around the conveyer system to different carousel locations where picking is required to fill an order. When an order has been completed the system will automatically consolidate those totes and then send them down a single lane for order processing."
Underneath all of this is a sophisticated multi-layered IT structure, managed by Remstar, integrating the put-to-light and pick-to-light systems with the carousels, and with the conveyors. These are controlled by the warehouse management system which is receiving its ordering information from Gardner Denver's legacy ERP system. Needless to say, the project was not without some interfacing challenges that needed to be overcome, quite typical for a project of this complexity.
Enhanced Picking Productivity
Put-to-light, pick-to-light and the Remstar Flexi-Pod Configuration of its carousels have significantly enhanced the speed of Gardner Denver's entire inventory management process. It can now process inventory in half the time, with a 50 percent reduction in labor hours needed to do the same tasks.
But more importantly, with the company's new distribution model it is no longer maintaining a dedicated aftermarket warehouse with its thousands of SKUs of duplicate inventory. Its new combined production/aftermarket inventory and distribution system has sizably streamlined Gardner Denver's DC operating costs.
Contact: Remstar International, Inc., 41 Eisenhower Dr., Westbrook, ME 04092
800-639-5805 or 207-854-1861 fax: 207-854-1610 Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM