Save. Share. Connect.
Sunday, September 25, 2016
VOLUME - NUMBER
NEPCON South China '16
SEMICON West '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
SEMICON West '13
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
IPC APEX '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
NEPCON China Product Preview '12
Atlantic Design/MDM 10
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
Atlantic Design/MDM 09
SEMICON WEST 08
NEPCON South China '13
ATExpo & IPC MW 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Electronic West/MDM 09
SMTAI and productronica '13
Multi tradeshow Product Preview '12
AATE/IPC Midwest 10
Electronics West/MDM 12
ATE and IPC MW 09
SMTAI and productronica '13
Atlantic Design/MDM 08
Add Message Board
EFD Unveils New Fluid Dispensing Components
Fluid dispensing components.
Providence, RI — EFD's new Optimum
syringe barrels, cartridges and pistons have benefited from a new, fresh design approach. According to the company, traditional dispensing components were based on medical syringes and modified for industrial use. In developing the new Optimum system, the company took a fresh approach and used Computational Fluid Dynamics (CFD) software to engineer a comprehensive family of disposable components.
The new components reportedly bring fluid dispensing and packaging processes to a higher level of reliability to meet the demands of today's cutting edge manufacturing processes.
New Zero Draft
syringe barrels provide even, laminar flow of watery low-viscosity fluids to thick viscous materials during filling and dispensing processes. The internal CFD-enhanced geometry eliminates any opportunity for "dead spots" that could trap air bubbles during filling or dispensing. Available in 3, 5, 10, 30 and 55cc capacities in clear, UV-blocking and light-blocking configurations.
Optimum cartridges and retainers improve yields and reduce costs in fluid packaging and dispensing processes that require a larger reservoir. A new, more robust cartridge design eliminates the risk of splitting, while see-through cartridge retainers reportedly make it easy to monitor fluid levels. The cartridges are available in 2.5, 6, 12, 20 and 32-oz. capacities.
The new design incorporates unique channels that prevent air entrapment during the filling process. Pistons are engineered to mate perfectly with syringe barrels, and have precision dual wiper edges that wipe syringe and cartridge walls clean as fluid is dispensed, eliminating waste and residue.
New end caps incorporate a special pushbutton for error-free attachment and an air-tight seal. Tip caps are vented to ensure that no air is pushed into the fluid during the installation process.
For more information, contact: EFD Inc., 977 Waterman Ave., East Providence, RI 02914. 14 Blackstone Valley Place, Lincoln, RI 02865
401-333-3800 fax: 401-333-4954 E-mail: firstname.lastname@example.org Web:
See at APEX Booth #1470.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM