Save. Share. Connect.
Sunday, December 4, 2016
VOLUME - NUMBER
NEPCON South China '16
SEMICON West '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
SEMICON West '13
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
IPC APEX '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
NEPCON China Product Preview '12
Atlantic Design/MDM 10
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
Atlantic Design/MDM 09
SEMICON WEST 08
NEPCON South China '13
ATExpo & IPC MW 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Electronic West/MDM 09
SMTAI and productronica '13
Multi tradeshow Product Preview '12
AATE/IPC Midwest 10
Electronics West/MDM 12
ATE and IPC MW 09
SMTAI and productronica '13
Atlantic Design/MDM 08
Vitronics Soltec Launches Enhanced Reflow System
Stratham, NH — Vitronics Soltec has introduced an enhanced XPM2 Reflow System called the XPM2+ — a better, leaner-looking machine with enhancements to its conveyor system, cooling system, electrical control system, software and user interface. In addition...
Sunstone Releases DFM Add-On for Layout Tool
Mulino, OR — Sunstone Circuits has released a factory certified add-on that enforces its manufacturing capabilities interactively inside CadSoft's EAGLE PCB Layout
tool. According to the company, the DFM Add-On, EAGLE PCB Layout allows users to design with more confidence that their PC board will be manufacturable ...
SPEA Intros Multimode Flying Probe Tester
Tyler, TX — SPEA is introducing its new 4040 Multimode flying probe tester, equipped with Multi-Probe for performing powered test applications such as boundary scan and Flash programming, and its 3030 Dual-Stage board tester, designed to reach the highest...
Pro-Line Offers ESD-Safe Workbench
Haverhill, MA — Pro-Line is offering the Model HD workbench with optional Electrostatic Dissipative (ESD) properties. The workbench is available in lengths ranging from 48 to 96-in., widths of 30 or 36-in., and a standard 30-in. height. Incorporating a heavy-duty, independent four-leg design, the workbench provides a highly functional 1000-pound capacity. It can be utilized in virtually any laboratory or production environment...
Printar Launches Digital Solder-Mask Printing System
Rehovot, Israel — Printar Ltd.has introduced its Printar Ltd.has introduced its GreenJet
, reportedly the first-ever fully digital solder-mask printing system for printed circuit board production. According to the company, the new system provides a very high level of performance for solder mask formation by replacing the...
Marantz: Automatic Desktop Optical Inspection
Santa Ana, CA — The M22XDL-350 desktop Automatic Optical Inspection machine from Marantz Business Electronics reportedly provides both the latest technology combined with cost-efficiency and powerful operator control on a reduced footprint. The small footprint system supports comprehensive inspection ...
Rohwedder Launches JOT Automation X-Ray Quality Scanner
Irving, TX — Rohwedder Group has launched its JOT Automation X-Ray Quality Scanner. The X-ray scanner has been created to ensure that clients' products are both accurate and of high quality before leaving the factory floor. According to the company, this solution enables electronics manufacturing ...
IP Systems: Bench Cabinet for Fumes and Vapors
Suwanee, GA — IP Systems' bench cabinet EC1800 is a low-cost solution for cleaning up fumes and vapors. Many electronics industry assembly processes require the use of harsh chemicals which the worker needs to be protected from. The cleaning of boards with solvents or spraying of conformal coating ...
High Viscosity Tapered Tip Needles from I&J Fisnar
Fair Lawn, NJ — When dispensing high viscosity fluids with standard blunt-end tips, extra pressure is required to overcome the resistance when entering the straight needle tube; the amount of resistance will depend on the internal bore of the tube. The effect of this extra pressure to overcome the ...
Henkel Intros Dispensable Thermal Interface
Irvine, CA — Henkel has launched its latest thermal product, PowerstrateXtreme
Dispensable (PSX-D). As a paste medium, the company's PSX-D alleviates the challenges associated with phase change films and the shortcomings of thermal greases by...
New JTAG/Boundary Scan Module from Goepel
Jena, Germany — Goepel electronic, has introduced Module
/DIMM244so as another I/O module of the CION product family. The new low-cost digital module is serially controlled via TAP by special CION
Endicott Intros HPC-Z Interconnect Solution
Endicott, NY — Having to drill plated-thru-holes (PTHs) to make signal connections within PC boards may become a thing of the past, thanks to a new technology from Endicott Interconnect Technologies. New HPC-Z interconnections provide signal connections only where desired, with functional isolation ...
Electrolube Intros Non VOC Conformal Coating
Swadlincote, Derbyshire, England — Electrolube has introduced what is said to be the market's first non-VOC conformal coating, NVOC, and NVMC, a VOC-free machine cleaner. The electro-chemicals manufacturer has also introduced Resin Stop, a new fluoropolymer release coating, and PCS, a new synthetic ...
Asymtek Intros Conformal Coating Platform
Carlsbad, CA — Asymtek, a Nordson company, is introducing its next generation conformal coating platform, the Select Coat
SL 940E which reportedly provides up to 30 percent faster throughput, a vision system, closed-loop process controls, traceability, and advanced integrated software. The new
platform provides high quality and increased productivity in a high-speed, high-accuracy coating system...
ECD: 20-Channel Thermal Profiler
Milwaukie, OR — The MEGAM.O.L.E.
20 from ECD saves its users production time by profiling those complex boards in a single pass. Eliminating the need for multiple runs also helps eliminate the errors that multiple runs often produce. When profiling complex boards with a wide variety of componenttypes and thermal masses, challenges abound. A thermal...
Digitaltest Intros CAD Digitizer
Stutensee, Germany — Virtually every test system available requires one basic ingredient — the original CAD data. Digitizer, newly introduced by Digitaltest GmbH, is the only system that gets around the problem of how to test when this vital ingredient is missing. CAD data may simply not be available ...
Agilent Intros Optical Multiport Power Meter
Santa Clara, CA — Agilent Technologies Inc. has introduced an optical power meter with four or eight power-sensor channels that provides manufacturing customers with increased throughput and operational efficiency. Designed for characterizing optical multiport components, these optical power meters ...
AGI Intros PCB Tray Storage Cart
Huntsville, AL — AGI Corporation has introduced its PCB Tray Storage Cart. This cart is designed to protect printed circuit boards of all sizes during transport and storage. The cart is available in two standard sizes to accommodate manufacturer's existing trays. The company also provides conductive ...
ASC: Solder Paste Inspection Systems
Maple Plain, MN — ASC International has launched its VisionMaster M450 and AP450 series solder paste inspection systems. The newly released M450 and AP450 provide many new enhancements to the VisionMaster systems. A larger color...
ACE Launches Intelligent Selective Fluxer
Spokane Valley, WA — ACE Production Technologies, Inc. has introduced the KISS-104F in-line fluxer, an intelligent fluxing system that enables the fluxing of only the specific components to be selectively soldered. The new unit is a high-speed Inline "Selective Fluxing" system which, working in conjunction ...
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM