Save. Share. Connect.
Thursday, February 22, 2018
VOLUME -23 NUMBER 6
Publication Date: 06/1/2008
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Feature: SMT and Production
Product Preview: Atllantic Des / MDM
June 2008 Issue
Add Message Board
DC-DC Switching Regulators from Aimtec
Dollard-des-Ormeaux, Quebec, Canada — Aimtec adds AMSR-78-NZ non-isolated, DC-DC switching regulator series as a feature-rich, cost-effective, pin-to-pin replacement of 78xx linear regulators. The AMSR-78-NZ series provides highly regulated output voltages ranging from 3.3VDC to 15VDC, producing maximum output currents of 500mA at efficiency rates of up to 96 percent.
Low output ripple and noise (35mV p-p) make these robust converters suitable for noise-sensitive applications. Ultra wide input ranges (up to 6:1) extend from 4.75 to 28VDC to 18 to 32VDC, allowing these highly reliable products to be powered from unregulated sources. Designed in a compact, SIP3 package (11.5 x 10.2 x 7.55mm), the AMSR-78-NZ series is pin-compatible to the TO-220 package and makes these power supplies suitable for low profile circuit implementations such as portable power and standby power applications.
Providing versatility for a multitude of industrial applications, the AMSR-78-NZ series is designed to operate at full output power without heatsinking or forced-air cooling below +71°C, with load derating up to +85°C, which is a distinct advantage for all applications.
Providing continuous short-circuit protection, output current limit and thermal shutdown, the DC-DC switching regulator converters can operate continuously at full load without the need for load derating below +71°C, within an ambient temperature range of -40 to +85°C.
Contact: Aimtec Inc., 3883 Blvd. St-Jean, Suite 502, Dollard-des-Ormeaux, Quebec, Canada H9G 3B9
888-926-6832 or 514-620-2722 fax: 514-620-2725 E-mail: email@example.com Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM