Electronic Mfg. Products Test/Inspection Production Equipment Soldering Cleaning/Coating/Adhesives

U.S. Tech Part Search Powered by Terms Of Use

HOME> Electronic Mfg. Products> Production Equipment>

Folder    Article    Weblink    Product    Forum Topic    Calendar    Form    Document    Album

1 2 3 4 5 6 7 all4-PCB: Machine Automates Mylar Peeling Publication Date: 5/11/2007 Los Angeles, CA — Distributor all4-PCB has introduced KSL- Kuttler's fully automated Mylar peeling machine. Until now, this has traditionally been a labor-intensive, manual operation. The ... AlternativeSMT Adds Feedermaster Options Publication Date: 12/7/2007 London, UK — AlternativeSMT has added new options to the Feedermaster® system involving upgraded software and a totally enclosed camera. The software now allows the user full control, including programmable zoom facility, and so has made the calibration routine more repeatable and accurate. The upgrade is ... AmTech Intros Ultrasonic Solar Panel Welder Publication Date: 5/11/2007 Danbury,CT — AmTech has introduced a new welding system to the Ultraseamproduct offering, the Ultraseam20 Ultrasonic Solar Panel Seam Welder Turnkey System. This semiautomatic ... Anti-Allergenic Adjustable Wristband from Desco Publication Date: 6/12/2007 Chino, CA — Desco has introduced a new anti-allergenic adjustable fabric wristband, item number 09020. There is no metal contact with the skin. The wristband adjusts under the cover, leaving no exposed "tail" of band material. The all-fabric contact is comfortable to wear and adjusts in circumfe ... APS Novastar Intros Auto Placer Vision Control Publication Date: 12/11/2008 Huntingdon Valley, PA — APS Novastar LLC is introducing automatic Vision Control for its L-Series pick-and-place systems. Vision Control advances the already precise, fast and reliable placement of 0201s with 100 percent accurate on-the-fly, bottom-up vision placement of micro BGAs and ultra fine ... ASI DataMyte Intros Ruggedized Industrial Computer Publication Date: 11/5/2007 Plymouth, MN — New from ASI DataMyte is the Model 9950, a ruggedized industrial computer that offers an especially suitable solution for clean room applications, such as electronics and medical devices, where a sealed unit is required, or where frequent washdowns occur. Backlit Conveyors from Conveyor Technologies Publication Date: 11/5/2007 Milford, OH — Upgrading to new high-intensity LED light modules in AccuVision Internal Backlit Conveyors, reportedly makes visual inspection more accurate and efficient. Newly introduced by Conveyor Technologies Ltd., the AccuVision conveyor design uses a translucent, light-passing belt. The LED ... Chad Launches New Odd Form System Publication Date: 12/7/2007 Anaheim, CA — Chad Industries, Inc. has shipped the first production IQs, the latest addition to its line of Odd-Form Component Placement platforms. The IQs provides a new lower-cost Odd Form circuit board assembly solution, while maintaining reliability... Cimetrix Launches New Interface A Solution Publication Date: 12/7/2007 Salt Lake City, UT — Cimetrix, Inc. has unveiled its latest "Interface A" software solution, EDAConnect™. This new client-side software library has reportedly been designed to assist integrated device manufacturers (IDMs) and third-party software providers in creating applications that can utilize the rich ... Cirris Intros Connector Pinning Assembly Aid Publication Date: 12/16/2008 Salt Lake City, UT — Cirris Systems Corp. is introducing Pin-Sight, calling it a revolutionary new tool for assuring correct pinning of electrical connectors during wire harness assembly. Pin-Sight's hi-res CCD camera guides the operator by electronically superimposing, on a video monitor, a target ... Clean Room Glovebox from Litron Publication Date: 4/28/2008 Agawam, MA — Litron, Inc.'s new clean room is designed to deliver hermetically sealed components virtually free of impurities, corrosive moisture, and damaging electrostatic discharge. The company now houses its glovebox units in a 3,000-square foot Class 100,000 Clean Room. This adds an important ... Coated Nylon Dissipative Gloves from Menda Publication Date: 6/12/2007 Chino, CA — Menda now has polyurethane-coated nylon dissipative gloves. The gloves are low dust and lint sloughing which makes them especially suitable for photo work and other processes requiring clean handling, thus minimizing fingerprints, Cognex Offers Vision-Based Wafer Pre-Alignment Publication Date: 1/25/2008 Natick, MA — Cognex Corporation has introduced the In-Sight® 1820 vision-based wafer pre-aligner. Utilizing proprietary Cognex NotchMax™ alignment technology, the vision system provides precise non-contact measurement of wafer position and orientation that is faster and more accurate than comparably ... Creform Intros Height/Angle Adjustable Flow Rack Publication Date: 7/20/2007 Green, SC — Creform® Corporation has introduced a new concept for a multi-tasking, storage, and part transfer unit to support warehouse order picking operations, or point-of-use locations for assembly and machining stations and work cells. The structure, using the company's system of pipe sections ... Creform Intros Materials Handling Tray/Cart/Rack Publication Date: 11/5/2007 Greer, SC — Creform® Corporation has introduced a new, multi-tasking and adaptive material handling structure utilizing its system of pipes and joints. The Tray Cart/Rack structure can be used for storing shallow trays and low-profile tote boxes containing parts and components and for transporting throughout a facility while providing a safe, secure over-the-road travel system... Creform Offers Kitting Cart Publication Date: 8/21/2007 Greer, SC — Creform® Corp. has developed what it describes as a new material handling concept that assists in transforming multi-part and component assembly tasks into organized and structured processed, to streamline operations for better efficiency and lower costs. Creform: New Concept Pushcart Design Publication Date: 5/11/2007 Greer, SC — Creform Corp. has developed a new structure concept using the Creform® System — a series of plastic coated tubing, joints and accessories — to provide manuf ... Cut ESD Mats from TopLine Publication Date: 9/24/2007 Garden Grove, CA — Now available from TopLine are ESD cut mats with grounding cord and comfortable wrist strap. The mats have a double layer structure — an upper static dissipative layer and a conductive bottom layer. The mats provide an excellent combination for Electrostatic Protected Areas ... Datron Intros Hi-Speed CNC with Micro Tool Machining Publication Date: 7/20/2007 Milford, NH — New from Datron is its excelsior® Lite CNC machining center. The system, for parts that are 1/4-in. or smaller in size, has been designed specifically for manufacturers who need innovative high-speed technology on a budget. DEK: Si Solar Cell Processing Line Publication Date: 12/11/2008 Flemington, NJ — DEK has introduced new silicon solar cell processing equipment that provides precise handling and maximum throughput of 150mm silicon wafers. The PV1200 system is designed to minimize breakages during wafer handling, while remaining easy to observe and monitor. The modular system ...