Tuesday, April 25, 2017
VOLUME - NUMBER
Advertisements
Home/Current Issue >  New Products >  Test Eqpt./Services > 

Atlas Intros Sealed Lamp for Testing

Chicago, IL — Atlas is introducing a new one-piece lamp assembly for its 6.5kW xenon arc-compatible weathering instruments. The sealed lamp, which can be used with all versions of the Ci35/Ci65 and Ci4000 Weather-Ometers, reportedly offers extraordinary ease of use. A typical lamp assembly is made up of multiple components, including the lamp, the upper and lower filter housings, the inner and outer filters, and a burner socket. These ...
Read More
 

Saelig Debuts New 20GHz Sig Gen

Pittsford, NY — Saelig Company, Inc. has introduced APSIN20G, a new low-noise, ultra-fast-switching microwave signal generator covering a frequency range from 10MHz up to 20GHz. The unit provides micro-Hz frequency resolution, a wide and accurately-flat output power range to 30dBm, and very low spurious ...
Read More
 

Sensor Products Film Grades Temperature Variations

Madison, NJ — Since thermal management is critical to heat sink performance, testing with Thermex® temperature distribution film has become a useful design and assembly quality control check. Thermex, from Sensor Products, Inc., is an economical thin sensor film that can be used in virtually any ...
Read More
 

Trek Intros High-Frequency Amplifier

Medina, NY — Trek, Inc. is introducing a new high-frequency amplifier, Model 2100HF. The new amplifier delivers high-frequency, high-speed, wide-bandwidth performance for use in Micro-Electro-Mechanical Systems (MEMS) as well as electro-optic, materials research, metrology, piezoelectric and ultrasonic ...
Read More
 

New Handheld Oscilloscopes from AEMC

Foxborough, MA — AEMC® Instruments has introduced its third generation of self-contained, handheld, two and four-isolated-channel oscilloscopes available in 100MHz and 200MHz bandwidths. The new instruments provide five complementary tools in one — an oscilloscope, FFT analyzer, 4-channel TRMS multimeter ...

Read More
 

Taylor Hobson Intros 3D Metrology Instrument

Leicester, UK — Taylor Hobson has further expanded the capabilities of its Talysurf family of metrology instruments with the launch of the Talysurf Optics 3D. Based on the established PGI Blu, the new PGI Optics 3D offers the combination of a wider range of part diameters — up to 200mm — with new ...

Read More
 

Entry-Level Compact DSO from B+K

Yorba Linda, CA — B+K Precision has replaced its model 2530 digital storage oscilloscope (DSO) with the new compact model 2530B. Priced as an entry-level DSO, the new 'scope offers many features expected in higher-end models. With a respectable bandwidth of 25MHz, a 500MSa/s sampling rate, and two input ...

Read More
 

Calex: Low Cost Strain Gage Signal Conditioner

Concord, CA — Calex Mfg. Co., Inc. has introduced its 6202 Series of strain gage signal conditioning modules. Designed for cost-sensitive applications, the module provides precise excitation, amplification and filtering for any strain gage-based measurement or control system. The unit is housed in a ...

Read More
 

Extech: Compact Electrical Dataloggers

Waltham, MA — Extech Instruments has introduced its new DL150 single-channel and DL160 dual-channel true rms AC voltage and current dataloggers. These compact tools are designed for electrical, industrial plant maintenance, and predictive maintenance professionals who need extended recording of ...
Read More
 

Global Specialties: 32-Channel Logic Analyzer

Yorba Linda, CA — Global Specialties LLC has introduced a new and improved, state-of-the-art 32-channel logic analyzer, the Model 3600. The logic analyzer accurately analyzes, validates and debugs digital signals while reportedly outperforming its higher-priced competitors in both features and value. The instrument ...
Read More
 

AEMC Intros Graphic Digital Multimeters

Foxboro, MA — AEMC has introduced its new high end, handheld graphic MTX Mobile Multimeters, offering a resolution of 100,000 counts, 0.02 percent basic accuracy and up to a 200kHz bandwidth. The instruments' unusual design, with a multiposition screen and pushbutton function selection, makes these ...

Read More
 

50MHz Pulse Generators from B+K

Yorba Linda, CA — B+K Precision has launched a new series of pulse generators — Models 4033 and 4034 high-performance, programmable units that deliver clean and accurate pulses for testing digital circuits and systems based on TTL, CMOS, or ECL logic families.

Read More
 

Calex Intros Strain Gage Signal Conditioner

Concord, CA — Calex Mfg. Co., Inc. has introduced its Model 163MK Strain Gage Signal Conditioner. The unit is designed to accommodate 1/4, 1/2 and full bridge strain-gage applications. It offers 1/4 bridge completion and calibration for applications such as materials and structural testing ...

Read More
 

Kistler Intros NC Force Measurement System

Amherst, NY — Kistler Instrument Corporation has introduced the DMF-P A310 Universal Type 4740A series — a high-precision force-displacement measurement system. The new product is designed for monitoring electromechanical NC joining modules and their associated joining and pressing-in operations ...
Read More
 

Nordson DAGE Launches Multi-Purpose Bondtester

Aylesbury, Buckinghamshire, UK — Nordson DAGE is introducing the 4000Plus multi-purpose bondtester. According to the company, the new tester delivers exceptional data integrity and superior accuracy. The system is able to perform a wide range of shear and pull applications as well as new push functionality ...
Read More
 

SCS Adds New Features to Cleanliness Test Systems

Indianapolis, IN — Specialty Coating Systems has introduced new features on its SCS Ionograph® ionic contamination test systems and PowerView software. The product now has an all-in-one onboard computer for efficient control and monitoring.
Read More
 

Starrett Intros Electronic Micrometers

Athol, MA — The L.S. Starrett Company's 795 and 796 Series Electronic Micrometers now offer measuring capabilities from 0-4-in. (0-125mm). Both micrometers provide an IP67 level of protection against coolant, water, chips, dirt, dust and other contaminants found in hostile shop environments. \par ...
Read More
 

TDK-EPC Intros Multi Measuring Interface

Iselin, NJ — TDK-EPC has introduced a new EPCOS brand Multi Measuring Interface, the EPCOS MMI7000. The new product is a universal measuring device to measure and control the most important grid parameters in a PFC (power factor correction) system. Harmful conditions in the power grid — such as ...
Read More
 

4DSP Adds Two A/D D/A Cards

Reno, NV — 4DSP has released two new analog-to-digital/digital-to-analog cards based on the FPGA mezzanine card standard (FMC). The FMC204 and FMC150 daughter cards are mechanically and electrically compliant with FMC standard (ANSI/VITA 57.1).
Read More
 

Kistler: Force-Displacement Measure System

Amherst, NY — Kistler Instrument Corporation has introduced the DMF-P A310 Universal Type 4740A series, a high-precision force-displacement measurement system. The system is designed to monitor electromechanical NC joining modules and their associated joining and pressing-in operations within assembly ...
Read More
 
 
 
search login