Save. Share. Connect.
Wednesday, May 24, 2017
VOLUME - NUMBER
Switches & Relays
Atlas Intros Sealed Lamp for Testing
Chicago, IL — Atlas is introducing a new one-piece lamp assembly for its 6.5kW xenon arc-compatible weathering instruments. The sealed lamp, which can be used with all versions of the Ci35/Ci65 and Ci4000 Weather-Ometers, reportedly offers
extraordinary ease of use. A typical lamp assembly is made up of multiple components, including the lamp, the upper and lower filter housings, the inner and outer filters, and a burner socket. These
Saelig Debuts New 20GHz Sig Gen
Pittsford, NY — Saelig Company, Inc. has introduced APSIN20G, a new low-noise, ultra-fast-switching microwave signal generator covering a frequency range from 10MHz up to 20GHz. The unit provides micro-Hz frequency resolution, a wide and accurately-flat output power range to 30dBm, and very low spurious ...
Sensor Products Film Grades Temperature Variations
Madison, NJ — Since thermal management is critical to heat sink performance, testing with Thermex
temperature distribution film has become a useful design and assembly quality control check. Thermex, from Sensor Products, Inc., is an economical thin sensor film that can be used in virtually any ...
Trek Intros High-Frequency Amplifier
Medina, NY — Trek, Inc. is introducing a new high-frequency amplifier, Model 2100HF. The new amplifier delivers high-frequency, high-speed, wide-bandwidth performance for use in Micro-Electro-Mechanical Systems (MEMS) as well as electro-optic, materials research, metrology, piezoelectric and ultrasonic ...
New Handheld Oscilloscopes from AEMC
Foxborough, MA — AEMC
Instruments has introduced its third generation of self-contained, handheld, two and four-isolated-channel oscilloscopes available in 100MHz and 200MHz bandwidths. The new instruments provide five complementary tools in one — an oscilloscope, FFT analyzer, 4-channel TRMS multimeter ...
Taylor Hobson Intros 3D Metrology Instrument
Leicester, UK — Taylor Hobson has further expanded the capabilities of its Talysurf family of metrology instruments with the launch of the Talysurf Optics 3D. Based on the established PGI Blu, the new PGI Optics 3D offers the combination of a wider range of part diameters — up to 200mm — with new ...
Entry-Level Compact DSO from B+K
Yorba Linda, CA — B+K Precision has replaced its model 2530 digital storage oscilloscope (DSO) with the new compact model 2530B. Priced as an entry-level DSO, the new 'scope offers many features expected in higher-end models. With a respectable bandwidth of 25MHz, a 500MSa/s sampling rate, and two input ...
Calex: Low Cost Strain Gage Signal Conditioner
Concord, CA — Calex Mfg. Co., Inc. has introduced its 6202 Series of strain gage signal conditioning modules. Designed for cost-sensitive applications, the module provides precise excitation, amplification and filtering for any strain gage-based measurement or control system. The unit is housed in a ...
Extech: Compact Electrical Dataloggers
Waltham, MA — Extech Instruments has introduced its new DL150 single-channel and DL160 dual-channel true rms AC voltage and current dataloggers. These compact tools are designed for electrical, industrial plant maintenance, and predictive maintenance professionals who need extended recording of ...
Global Specialties: 32-Channel Logic Analyzer
Yorba Linda, CA — Global Specialties LLC has introduced a new and improved, state-of-the-art 32-channel logic analyzer, the Model 3600. The logic analyzer accurately analyzes, validates and debugs digital signals while reportedly outperforming its higher-priced competitors in both features and value. The instrument ...
AEMC Intros Graphic Digital Multimeters
Foxboro, MA — AEMC has introduced its new high end, handheld graphic MTX Mobile Multimeters, offering a resolution of 100,000 counts, 0.02 percent basic accuracy and up to a 200kHz bandwidth. The instruments' unusual design, with a multiposition screen and pushbutton function selection, makes these ...
50MHz Pulse Generators from B+K
Yorba Linda, CA — B+K Precision has launched a new series of pulse generators — Models 4033 and 4034 high-performance, programmable units that deliver clean and accurate pulses for testing digital circuits and systems based on TTL, CMOS, or ECL logic families.
Calex Intros Strain Gage Signal Conditioner
Concord, CA — Calex Mfg. Co., Inc. has introduced its Model 163MK Strain Gage Signal Conditioner. The unit is designed to accommodate 1/4, 1/2 and full bridge strain-gage applications. It offers 1/4 bridge completion and calibration for applications such as materials and structural testing ...
Kistler Intros NC Force Measurement System
Amherst, NY — Kistler Instrument Corporation has introduced the DMF-P A310 Universal Type 4740A series — a high-precision force-displacement measurement system. The new product is designed for monitoring electromechanical NC joining modules and their associated joining and pressing-in operations ...
Nordson DAGE Launches Multi-Purpose Bondtester
Aylesbury, Buckinghamshire, UK — Nordson DAGE is introducing the 4000Plus multi-purpose bondtester. According to the company, the new tester delivers exceptional data integrity and superior accuracy. The system is able to perform a wide range of shear and pull applications as well as new push functionality ...
SCS Adds New Features to Cleanliness Test Systems
Indianapolis, IN — Specialty Coating Systems has introduced new features on its SCS Ionograph
ionic contamination test systems and PowerView software. The product now has an all-in-one onboard computer for efficient control and monitoring.
Starrett Intros Electronic Micrometers
Athol, MA — The L.S. Starrett Company's 795 and 796 Series Electronic Micrometers now offer measuring capabilities from 0-4-in. (0-125mm). Both micrometers provide an IP67 level of protection against coolant, water, chips, dirt, dust and other contaminants found in hostile shop environments. \par ...
TDK-EPC Intros Multi Measuring Interface
Iselin, NJ — TDK-EPC has introduced a new EPCOS brand Multi Measuring Interface, the EPCOS MMI7000. The new product is a universal measuring device to measure and control the most important grid parameters in a PFC (power factor correction) system. Harmful conditions in the power grid — such as ...
4DSP Adds Two A/D D/A Cards
Reno, NV — 4DSP has released two new analog-to-digital/digital-to-analog cards based on the FPGA mezzanine card standard (FMC). The FMC204 and FMC150 daughter cards are mechanically and electrically compliant with FMC standard (ANSI/VITA 57.1).
Kistler: Force-Displacement Measure System
Amherst, NY — Kistler Instrument Corporation has introduced the DMF-P A310 Universal Type 4740A series, a high-precision force-displacement measurement system. The system is designed to monitor electromechanical NC joining modules and their associated joining and pressing-in operations within assembly ...
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM