Thursday, August 17, 2017
VOLUME - NUMBER
Advertisements
Home/Current Issue >  New Products >  Components > 

AVX Expands MLCC Family

Myrtle Beach, SC — AVX Corporation has expanded its extensive family of multilayer ceramic chips (MLCCs) to include gold-plated terminations.
 
Designated the Au Series, the RoHS-compliant MLCC eliminates the use of tin and lead and subsequent tin whiskering ...

Read More
 

Draeger Intros Chemical Protective Suit

Pittsburgh, PA — Draeger Safety, Inc. has introduced a new single exposure, disposable, Level A gas-tight chemical protective suit for hazardous materials (hazmat) incidents. Called the Draeger CPS 5900, the fully-encapsulated suit is especially designed to provide complete protection against hazardous ...
Read More
 

Fairchild: Linear LED Drivers

San Jose, CA — Fairchild Semiconductor has introduced a linear LED driver option that can save up to 60 percent of board space compared to alternate solutions. The design of the FAN5622/24/26 reduces overall component count by eliminating additional passive components used in charge pumps and series ...
Read More
 

Sticky Thermal Interface from Fujipoly

Carteret, NJ — Fujipoly has introduced Sarcon® GR-Tac, a highly conformable and durable 0.25mm thick polyester-reinforced thermal interface material (TIM). Sarcon 25GR-Tac is easy to install and typically does not require adhesive due to its naturally tacky consistency. These inherent characteristics ...
Read More
 

HellermannTyton Launches Nameplate Label Solutions

Milwaukee, WI — HellermannTyton is introducing foam nameplates and foam button nameplates to its Identification Solutions product line. Designed specifically to replace plastic and metal faceplates commonly found on control panels, these foam-based markers are laminated with a high-performance polyester ...
Read More
 

Keystone Intros PC Clip for Li-Ion Batteries

Astoria, NY — With the introduction of Catalog item No. 54, a low profile, thru-hole PC Battery Clip for Lithium-Ion size cells from 17-19mm diameter, Keystone Electronics has met increasing demands for accommodating higher energy, lower weight, rechargeable batteries placed in mobile products.\par ...
Read More
 

Multi-Seals: Wash-Aways Dissolvable Spacers

Manchester, CT — Multi-Seals Inc. has introduced Wash-Away dissolvable spacers, designed to provide consistent spacing between printed circuit boards and PCB components. These organic polymer spacers locate PCB components during soldering operations.
Read More
 

NTE Updates Cross-Referencing Software

Bloomfield, NJ — NTE Electronics, Inc. has released its new Version 15.0 of the company's popular cross-reference software program, QUICKCross. With thousands of new parts added, this new updated version now cross-references over 517,000 industry part numbers.
Read More
 

Orion Fans: First DIN Rail Mounted Fan

Dallas, TX — Orion Fans, a division of Knight Electronics, has developed the first DIN-rail-mounted fan for thermal management issues in enclosures or cabinets. The SpotCool DIN-rail fan provides an energy-efficient alternative to design-in cooling solutions with a simple installation that can be ...
Read More
 

HTC: Friendly Green Recycled Wipes

Enfield, CT — Friendly green single-ply wipes from High-Tech Conversions, are low linting, very absorbent, soft and will not scratch. They are excellent for light duty tasks and delicate surfaces. Because they are very low in lint and chemical extractables, they will leave surfaces very clean ...
Read More
 

Magid Intros Tough Disposable Nitrile Gloves

Chicago, IL — Using a new compound for advanced breaking strength and widened application usage, Magid Glove & Safety has introduced its new EconoWear® T9330 Disposable Nitrile Gloves. These ambidextrous, light blue, powder-free, latex-free, 9-1/2-in. (241mm) long, 5 mil. (127µ) disposable nitrile ...
Read More
 

Pres-On: Lightweight Nylon-6 Foam Insulation

Addison, IL — Pres-On is bringing manufacturers a cost-effective alternative to silicone foam with its introduction of its new N3000, a lightweight, closed cell, cross-linked foam based on Nylon 6. It is offered in 39 x 78-in. (990 x 1981mm) sheets in thicknesses ranging from 1/16 to 1/2-in. (1.59 ...
Read More
 

New QPL MIL RF Inductors from Gowanda

Gowanda, NY — Gowanda Electronics has introduced two new series of inductors that meet the military's Qualified Products List requirements for "Established Reliability". The company's ER10M and ER17S thru-hole RF inductor series are approved to MIL-PRF-39010, Level M. Such ER approval requires extensive ...
Read More
 

Fujipoly: New Catalog Released

Carteret, NJ — Fujipoly has released its new "Thermal Interface Material and Elastomeric Connector" product catalog. The free 52-page product overview and technical design guide includes helpful installation suggestions as well as detailed thermal performance and electrical conductivity data points ...
Read More
 

Gore Intros Family of Cartridge Filters

Elkton, MD, — W. L. Gore & Associates, Inc. (Gore) is offering a new family of highly efficient cartridge filters that improve water quality and reduce total cost of filtration for ultrapure water (UPW) and de-ionized (DI) water used in the manufacture of semiconductors and silicon wafers.
Read More
 

JaroTherm: Micro Cooling Fan

Boca Raton FL — Jaro's newest ultra-thin, micro-sized fan, Model JR1504E-5 measures just 15 x 15 x 4mm (0.591 x 0.591 x 0.157- in.), the entire package comes with an impressive IP 57 water resistant rating, which protects against harsh environments where dust, water, or humidity could be a problem ...
Read More
 

High CRI LEDs from JKL

Pacoima, CA — JKL Components Corp. has introduced the ZSM- 6550-C LED series, a complete range of high output, high CRI series of White LEDs used in any application requiring a CRI (Color Rendering Index) above 90.
Read More
 

Bi-Stable LCD from Lumex

Palatine, IL — Lumex has introduced its InfoVue Bi-Stable family of displays, a low-power LCD solution well-suited for a wide range of applications where display information is not changed more than a few times a day. For some applications, the Lumex InfoVue Bi- Stable LCD requires up to 99 percent ...
Read More
 

Meritek Intros SMD Current Sense Resistors

Santa Fe Springs, CA — New SMD current sense resistor families are now available from Meritek Electronics Corp. The MLR- series of Metal Alloy based products are available in case sizes ranging from 1206 to 2728, at power levels from 1 to 4W, and values from 0.25 to 100mΩ. The CSR series of thick ...
Read More
 

Thermal Gap Fillers from MH&W

Mahwah, NJ — New TP-S30 thermal interface pads from MH&W International provide 3.0W/mK of thermal conductivity between hot components and heat sinks at lower costs than competing gap filler materials.
Read More
 
 
 
search login