Monday, July 24, 2017
VOLUME - NUMBER
Advertisements
Home/Current Issue >  New Products > 

Teledyne DALSA Adds to Genie Nano Camera Series

Waterloo, Ontario, Canada — Teledyne DALSA has introduced four new models to its Genie Nano GigE Vision camera series. Built around Sony's Pregius IMX 267 and 304 LL and LQ image sensors, the new 12-bit, 8.9 and 12 MP cameras deliver both speed and high-quality imaging. With the addition of the ...
Read More
 

ULT Creates Accessory Kit for Extraction System

Loebau, Germany — ULT AG has introduced an accessory kit for its JUMBO Elephant extraction and ionization system, consisting of various test and measurement devices and cleaning tools. The ion check set includes a functional tester for ionization systems and a measuring probe for high-voltage power ...
Read More
 

WAGO Intros Plug-In Current Transformers

Germantown, WI — WAGO has introduced a range of plug-in current transformers with CAGE CLAMP® connections.
Read More
 

Würth Elektronik Publishes Component Catalog

Waldenburg, Germany — Würth Elektronik has published its "Passive Components 2017" product catalog. Numerous categories are presented in the 776-page publication, including EMC components, power magnetics, signal and communications, and AEC-Q qualified products.
Read More
 

XENON Intros Benchtop Pulsed Light System

Wilmington, MA — XENON Corporation has introduced its X-1100, a low-cost benchtop pulsed light system that offers scientists and engineers high-intensity, pulsed light for a vast number of applications that require rapid photonic exposure.
Read More
 

2E SysCom Develops IGBT Connector and Cable Assemblies

Millis, MA — 2E SysCom has developed IGBT (insulated gate bipolar transistor) connectors and cable assemblies designed specifically for attaching to spade terminals on IGBT power modules. The connectors and cable assemblies are used to connect IGBT modules to PCBs. Suitable for 2.8 x 0.5 mm (0.11 ...
Read More
 

BEI Kimco Creates Anti-Rotational VCA

Vista, CA — BEI Kimco has introduced a new moving magnet voice coil actuator with a flexure designed to ensure high alignment accuracy by preventing unwanted shaft rotation. The new VCA has a long lifespan at cost-effective pricing and is suited for applications where extreme precision is required ...
Read More
 

Binder Intros Compact Hex Nut Power Connector

Camarillo, CA — Binder USA has introduced a new style of panel-mounted connector to its line of power solutions. The RD24 connector with plastic hex nut is a solution for applications with thick panel boxes and reduces the need for mounting screw holes. The power connectors are compact and easy to ...
Read More
 

Bridgetek Intros Super-Bridge Microcontroller Units

Tigard, OR — Bridgetek has introduced a new series of super-bridge microcontroller units (MCUs) to complement its existing FT90x products. The new FT93x devices offer identical performance levels and the same principal features and functionality, but in smaller, lower pin count packages — amounting ...
Read More
 

CUI Improves Thermal Management with DC Fans

Tualatin, OR — CUI has added its CFM series of high-performance DC fans to its existing portfolio of thermal management products. The fans are available in various frame sizes from 40 to 120 mm (1.6 to 4.7 in.) and deliver airflow ranging from 10 to over 200 CFM.
Read More
 

Dow Corning Develops Printable Silicone Rubber

Auburn, MI — Dow Corning has developed a 3D-printable silicone rubber, LC-3335, in collaboration with German RepRap GmbH, a manufacturer of fused filament fabrication (FFF) 3D printers. The new material is the first Dow Corning product formulated specifically for designers seeking to combine the performance ...
Read More
 

Excelsys: Medical Safety Approved Fanless Power Supply

Cork, Ireland — Excelsys has designed its CoolX600 series of convection-cooled modular power supplies to deliver 600W of output power without fan assisted cooling. According to the company, it is the only fanless modular power supply on the market that meets medical safety approvals. Based on the ...
Read More
 

Hemco Expands Line of UniMax Hoods

Independence, MO — Hemco Corporation has expanded its line of UniMax fume hoods containing fire suppression systems to meet California requirements. Standard models range from 6 to 24 ft (1.8 to 7.3m) wide, 4 to 8 ft (1.2 to 2.4m) deep, and 7 to 16 ft (2.1 to 4.9m) high. Tall apparatus and distillation ...
Read More
 

Ironwood Intros 378-Pin BGA Socket

Eagan, MN — Ironwood Electronics has introduced a new high-performance BGA socket for 0.61 x 0.64 mm (0.024 x 0.025 in.) pitch, 378-pin BGA ICs. The SG-BGA-7303 socket is designed for 18.2 x 9.7 mm (0.7 x 0.4 in.) BGA packages and operates at bandwidths up to 36 GHz with less than 1 dB of insertion ...
Read More
 

Kaman Creates Non-Contact Position Sensing System

Colorado Springs, CO — The measuring division of Kaman Precision Products has introduced its OEM-2306, a non-contact, linear displacement measuring instrument that uses eddy current technology. The OEM-2306 offers the same high performance machine control as the KD-2306 signal conditioning electronics ...
Read More
 

KOA Speer Expands Range of Chip Resistors

Bradford, PA — KOA Speer Electronics has introduced an expanded resistance range of 47Ω to 1 MΩ for its RN73H series of ultra-precise thin-film metal chip resistors. The new low end of the resistance range (47Ω) affects the 0402, 0603, 0805, and 1206 sizes.
Read More
 

Komax Mixer Addresses Desalination Problems

Huntington Beach, CA — Komax Systems now offers its triple action static mixer for use in desalination plants and other water treatment applications. The mixer is designed specifically to aid in the chemical addition phase of the desalination process. Custom configurations are available and the mixers ...
Read More
 

Marktech: High-Rel Packaging with Cree Chips

Latham, NY — Marktech Optoelectronics has introduced its latest series of high-reliability metal can packages, which incorporate Cree's robust LED dice. Cree combines highly-efficient InGaN materials with proprietary substrates to deliver superior performance for high-intensity LEDs. Marktech's metal ...
Read More
 

Meggitt Sensing Intros Miniature Pressure Sensor

Irvine, CA — Meggitt Sensing Systems has launched its Endevco 8523 high-temperature pressure sensor that uses silicon strain gauges to enable gauge and differential measurements. Designed for static or dynamic pressures, applications include inlet distortion pressures in turbine engines, transmission ...
Read More
 

Mill-Max Releases Through-Hole Spring-Loaded Connectors

Oyster Bay, NY — Mill-Max has added a through-hole version of its 2 mm (0.08 in.) pitch spring-loaded connectors to complement the series' surface mount version. These spring-loaded connectors (SLCs) are an appealing option that combine both durability and space-saving qualities. For board-to-board ...
Read More
 
 
 
search login