Wednesday, September 20, 2017
VOLUME - NUMBER
Advertisements
Home/Current Issue >  New Products > 

OES Intros High-Precision Goniometers

Van Nuys, CA — Optimal Engineering Systems (OES) is now offering stacked, precision-aligned goniometer stages with a rotational center 50 mm (2 in.) above the upper stage. The lower (AK110-10) goniometer stage has a 65 x 65 mm (2.6 x 2.6 in.) table capable of ±10° of rotation at a rate of 7 ...
Read More
 

Optimal Releases Control Solution for ASYMTEK Dispensers

Austin, TX — Optimal Electronics Corporation has released a control and traceability system for Nordson ASYMTEK Spectrum II series dispensers. The company provides control and traceability solutions for cleanrooms and MEMS sensor assembly. The dispensing solution integrates with the company's complete ...
Read More
 

PCB Intros Triaxial Isolated Accelerometers

Depew, NY — PCB's two new triaxial ICP® accelerometer models, 354A04 and 354A05, are case-isolated to help ensure measurement accuracy in the presence of electrical noise sources, such as EMI and ground loops. These accelerometers are rugged and durable, with titanium housings. The case-isolated ...
Read More
 

Polytron Intros Industrial DC-DC Converters

Paterson, NJ — Polytron Devices has launched two new DC-DC converters for use in industrial applications. The QB100 and QB150 series have 100 and 150W ratings, respectively, as well as a 4:1 wide input range.
Read More
 

RIGOL Expands Power Analysis Portfolio

Beaverton, OR — RIGOL Technologies has expanded its power analysis test portfolio with the DL3000 series of DC electronic loads. The loads are designed to give engineers an affordable solution to quickly determine power needs when evaluating and optimizing power and battery life in new products. ...
Read More
 

SCHURTER Offers Multicolor Luminescent Line Switches

Santa Rosa, CA — SCHURTER has added to its MSM metal line range with a multicolor illuminated pushbutton switch. The switch has homogeneous ring illumination, or complete actuator area illumination. Status indication is available in seven different colors for each switch.
Read More
 

SDI Intros Variable Capacitive Accelerometers

Kirkland, WA — Silicon Designs, Inc. (SDI) has introduced a range of three-axis MEMS variable capacitive accelerometers. The rugged plug-and-play devices are suitable for a wide array of demanding applications. The 2460, 2466, 2470, and 2476 models excel in zero-to-medium frequency commercial and ...
Read More
 

Spectrum Expands generatorNETBOX Multichannel AWGs

Hackensack, NJ — Advanced electronic systems are increasingly turning to parallel design architectures to increase their performance in applications that include MIMO, radar, quantum computing, and multi-lane serial bus testing. To develop these systems, and those with similar multi-receiver/emitter ...
Read More
 

Swissbit Releases Embedded Multimedia Card

Port Chester, NY — Swissbit has introduced its EM-20 embedded multimedia card (eMMC), which combines an industrial controller with reliable, multilevel cell (MLC) flash in a BGA153 package. This package allows the memory to be soldered directly onto the PCB.
Read More
 

Tech-Etch: Custom Photo-Etched Screens and Filters

Plymouth, MA — Tech-Etch photo etches custom screens, filters and filter supports for many applications, including medical devices, hydraulic valve screens, laser light filters, fuel filters, extruding screens, liquid filtration, particle separation, and sizing. Photo etching allows designers to ...
Read More
 

Teledyne DALSA Adds to Frame Grabber Series

Waterloo, Ontario, Canada — Teledyne DALSA has expanded its Xtium series with a new half-length CoaXPress frame grabber. Teledyne DALSA frame grabbers combine high performance and extensive feature sets, value, and camera support.
Read More
 

TopLine's SOT Jumpers Eliminate PCB Redesign Headaches

Irvine, CA — TopLine is now offering SOT Jumper components, a low-cost way to short out (JUMPER) PCB circuitry without the need to redesign or spin a whole new board. TopLine SOT23 components short out specific pins together with less than 50 mΩ of resistance.
Read More
 

Xuron Offers ESD-Safe Cutters and Pliers

Saco, ME — Xuron Corporation is now offering a full line of precise, ergonomic hand tools that includes a range of speciality cutters and pliers with ESD-safe handles. Xuron® ESD-safe cutters and pliers have static dissipative handgrips and include Micro-Shear® flush cutters which produce clean ...
Read More
 

ZYGO Intros High-Res Laser Interferometer

Middlefield, CT — ZYGO Corporation has introduced its Verifire HDX laser interferometer system with ultra-high spatial resolution and advanced imaging for measuring the surface form and transmitted wavefront of high-performance optical components and systems.
Read More
 

AOS Unveils Intelligent IGBT Power Module

Sunnyvale, CA — Alpha and Omega Semiconductor (AOS) has released its IPM5 series of intelligent power modules. The power modules are designed to offer high efficiency and ruggedness in a compact package. The IPM5 contains AlphaIGBT technology and integrated high-functioning gate driver ICs. Its ...
Read More
 

CDM Offers Semi-Custom Cable Assemblies

Turnersville, NJ — CDM Electronics is now offering a range of semi-custom SAFER (smoke and fire exposure reducing) Cable assemblies for RF, Ethernet (RJ45) and power applications. The low-smoke zero-halogen (LSZH) cable assemblies are intended for spaces where many cables are in close proximity ...
Read More
 

CLC Intros Laser Engraving Machine

Orlando, FL — Control Laser Corporation has introduced its AeroMark Perfect Panel laser engraving machine. The machine meets aerospace industry requirements for high precision along with the flexibility to change on demand. Back-lit instrument panels and overlays up to 30 x 30 in. (76.2 x ...
Read More
 

Coto Releases Wafer-Based TMR Sensor

North Kingstown, RI — Coto Technology has released its RedRock RR110 wafer-based tunneling magnetoresistive (TMR) analog sensor. With strong magnetic sensitivity, high directionality, a small package size, and a competitive price, the RR110 is suitable for continuous fluid measurement applications ...
Read More
 

CUI Intros Line of Peltier Modules

Tualatin, OR — CUI's thermal management group has introduced a new line of high-performance Peltier modules. The thermoelectric coolers' arcTEC structure makes use of a combination of thermally conductive resin between the ceramic and copper on the cold side of the module, high-temperature solder ...
Read More
 

D3 Semiconductor Intros Superjunction MOSFETs

Addison, TX — D3 Semiconductor is entering the power semiconductor market with the launch of its +FET line of 650V-rated superjunction MOSFETs. The MOSFETs enable high-efficiency solutions for a range of hard-switched applications, including PFC boost and inverters used in telecom, enterprise ...
Read More
 
 
 
search login