Sunday, April 23, 2017
VOLUME - NUMBER
Advertisements
Home/Current Issue >  New Products > 

Kaman Creates Non-Contact Position Sensing System

Colorado Springs, CO — The measuring division of Kaman Precision Products has introduced its OEM-2306, a non-contact, linear displacement measuring instrument that uses eddy current technology. The OEM-2306 offers the same high performance machine control as the KD-2306 signal conditioning electronics ...
Read More
 

KOA Speer Expands Range of Chip Resistors

Bradford, PA — KOA Speer Electronics has introduced an expanded resistance range of 47Ω to 1 MΩ for its RN73H series of ultra-precise thin-film metal chip resistors. The new low end of the resistance range (47Ω) affects the 0402, 0603, 0805, and 1206 sizes.
Read More
 

Komax Mixer Addresses Desalination Problems

Huntington Beach, CA — Komax Systems now offers its triple action static mixer for use in desalination plants and other water treatment applications. The mixer is designed specifically to aid in the chemical addition phase of the desalination process. Custom configurations are available and the mixers ...
Read More
 

Marktech: High-Rel Packaging with Cree Chips

Latham, NY — Marktech Optoelectronics has introduced its latest series of high-reliability metal can packages, which incorporate Cree's robust LED dice. Cree combines highly-efficient InGaN materials with proprietary substrates to deliver superior performance for high-intensity LEDs. Marktech's metal ...
Read More
 

Meggitt Sensing Intros Miniature Pressure Sensor

Irvine, CA — Meggitt Sensing Systems has launched its Endevco 8523 high-temperature pressure sensor that uses silicon strain gauges to enable gauge and differential measurements. Designed for static or dynamic pressures, applications include inlet distortion pressures in turbine engines, transmission ...
Read More
 

Mill-Max Releases Through-Hole Spring-Loaded Connectors

Oyster Bay, NY — Mill-Max has added a through-hole version of its 2 mm (0.08 in.) pitch spring-loaded connectors to complement the series' surface mount version. These spring-loaded connectors (SLCs) are an appealing option that combine both durability and space-saving qualities. For board-to-board ...
Read More
 

Murata Intros High Power Density DC-DC Converter

Smyrna, GA — Murata has introduced its MYMGK series of miniature "mono block" type, surface mount, point-of-load (PoL) DC-DC converters. The non-isolated mono block converters are available in two models, 6 and 20A. Both versions are available with two output voltage range options. Typical applications ...
Read More
 

NK Technologies Intros Voltage Transducer

San Jose, CA — NK Technologies has introduced its VTU voltage transducer, which measures AC or DC circuit voltages up to 1,200V with a single sensor. The sensor produces an analog signal directly proportional to the rms voltage, making it a useful tool for detecting power generation issues such brown ...
Read More
 

OSG Creates Comprehensive Catalog of Cutting Products

Glendale Heights, IL — OSG USA has introduced its 2017/18 cutting tool solutions catalog in both print and digital versions. The latest catalog edition is over 1,300 pages and includes new products such as Exocarb® ADF flat drills and Phoenix® PSTW indexable shoulder cutters. It also includes ...
Read More
 

Pacific Power Source: Programmable AC/DC Power Supplies

Irvine, CA — Pacific Power Source has launched its new AFX series of programmable AC and DC power supplies. AFX models are available in power levels ranging from 9 to 60 kV. All models are based on a proprietary, all-digital, power conversion technology platform that supports a set of formerly unavailable ...
Read More
 

Pittman Launches Brush DC Motor

Harleysville, PA — Pittman® a business unit of AMETEK Precision Motion Control, has introduced the latest in its line of brush-commutated DC motors, the DC022C series, a 22 mm (0.9 in.) diameter unit offered in three lengths with continuous output torques of 0.0056 to 0.141 Nm.
Read More
 

RIGOL Adds to Entry-Level AWG Lineup

Beaverton, OR — RIGOL Technologies has expanded its lineup of arbitrary waveform generators (AWGs). The new DG10227 offers budget-constrained customers a solution with advanced features that are typically reserved for much higher price points. Now makers, educators, and IoT designers working with ...
Read More
 

Schaffner Intros Sine Wave Filter for Motor Drives

Edison, NJ — Schaffner has introduced its FN530 sine wave filter with EMC output filter which eliminates premature motor damage caused by high dv/dt, over-voltages, cable ringing, motor overheating, and eddy current losses in industrial applications. Suitable for motors from 1.5 to 7.5 kW, 4-16A ...
Read More
 

TE: High-Voltage Contactor for Harsh Environments

Berwyn, PA — TE Connectivity has introduced its Kilovac EV202 high-voltage contactor. Hermetically-sealed and designed for harsh environments, the double-pole 350A DC contactor offers exceptional performance in an extremely small and lightweight device. EV202 contactors provide reliable and long ...
Read More
 

TT Electronics Launches Flyback Transformer

Perry, OH — TT Electronics is targeting demanding high-temperature automotive and industrial applications with its latest flyback transformer, HA00-10043ALFTR. Offering high voltage isolation between primary and secondary windings, coupled with AEC-Q200 Grade 0 automotive certification and an operating ...
Read More
 

UEI Develops 16-Channel Interface I/O Board

Walpole, MA — United Electronic Industries (UEI) has introduced its newest high-performance ARINC-429 interface I/O board, the DNx-429-516. The 16-channel board is fully-compliant with ARINC-429 specifications and supports both high-speed (100 kHz) and low-speed (12.5 kHz) operation.
Read More
 

VTI Instruments: Rugged Thermocouple Measurement Instrument

Irvine, CA — VTI Instruments has released its RX1032 rugged thermocouple measurement instrument, a compact and rugged instrument that delivers high measurement accuracy and acquisition rates in demanding environments.
Read More
 

Watlow Releases Modular I/O Data Logger

St. Louis, MO — Watlow® has introduced its D4T with Intuition®, a data logger that contains a wide range of field-removable I/O modules offering maximum design flexibility. Configurations can be customized to meet the scaling needs of a tremendous range of equipment and applications while providing ...
Read More
 

Wieland Expands Safety Control Module Capabilities

Oakville, Ontario, Canada — Wieland Electric has added six new industrial press function control blocks to its samos®PRO COMPACT-PLUS family of programmable safety controllers, and integrated support for both EtherNet/IP and EtherCAT fieldbus communication protocols. The expanded capabilities of ...
Read More
 

Wolfspeed Sponsors RF Circuit Tutorial

Research Triangle Park, NC — Wolfspeed, a Cree company, is sponsoring one year of free access to a comprehensive multimedia engineering tutorial on passive and active RF circuits, including amplifiers. Entitled "Conquer Radio Frequency: A Multimedia Conceptual Guide to RF & Microwave Engineering, Based on AWR ...
Read More
 
 
 
search login