Save. Share. Connect.

Saturday, June 23, 2018

VOLUME - NUMBER

SensiEDGE Intros Arduino-Supported IoT Module

Tel Aviv, Israel — SensiEDGE has released its SensiBLEduino, an off-the-shelf, hardware-ready development kit, based on the open-source Arduino prototyping platform. Developers can now combine the Arduino programming language and Arduino software (IDE) with the SensiBLE development kit SIMBA-DKL ...

TMC Develops Vibration Cancellation Table

Peabody, MA — Technical Manufacturing Corporation (TMC), a business unit of AMETEK Ultra Precision Technologies, has installed a custom CleanTop^® vibration cancellation table for a research project at Arrival Heights Laboratory in Antarctica. The company now has systems installed on all seven continents ...

TT Intros AEC-Q200 Metal Alloy Resistors

Perry, OH — TT Electronics has introduced its LRMAP5930 series of low-resistance, metal alloy current sense power resistors. With values as low as 200 µΩ and a corresponding power rating on standard FR4 PCB of up to 10W, the maximum measurable current is over 200A. In most cases it is restricted ...

Ultra-Thin OLED Displays from Electronic Assembly

Gilching, Germany — Electronic Assembly (EA) has introduced its OLEDS1026LGA family of displays that offer the advantages of OLED technology within a small form factor. The new modules offer the typical OLED high contrast ratio of 2,000:1 and an extremely fast response time of only 10 µs, without ...

Vision Research Launches Ultra-High-Speed Camera

Wayne, NJ — Vision Research has introduced its Phantom^® v2640, a fast 4 MP camera. It has a proprietary 4 MP, 2048 x 1952 resolution, CMOS image sensor and delivers speeds of up to 26 GP/s. It reaches 6,600 FPS at full resolution and 11,750 FPS at 1920 x 1080.

Würth: Inductors, Capacitors and Plug Connectors

Waldenburg, Germany — Würth Elektronik eiSos has introduced a series of ferrite SMT inductors with specified peak currents, the WE-MPSB. The low R_OC enables high rated currents, while generating minimal heat. The series is optimized for filtering highly efficient DC-DC switching controllers ...

Applied Motion Products Adds New Motor Connector

Watsonville, CA — Applied Motion Products is now offering a new daisy-chain board connector for its NEMA 11 frame StepSERVO integrated motors. The optional connector separates communication terminals into two standalone power and I/O connectors, making it easier to establish daisy-chain connections ...

BUILT and Volta Create Powered Workstations

Holland, MI — BUILT Systems and Volta Power Systems have launched mobile manufacturing workstations that are designed with BUILT's hardware and Volta's lithium-ion energy storage technology.

CUI Intros Line of DC Centrifugal Blowers

Tualatin, OR — CUI's thermal management group has launched its CBM line of DC centrifugal blowers. The blowers have frame sizes of 2, 2.4, 3, 3.8, or 4.7 in. (50, 60, 75, 97, or 120 mm) and airflows that range from 2.6 to 54.7 CFM.

DELO Offers Adhesives for Display Bonding

Sudbury, MA — DELO is now offering two reliable adhesives that are suitable for bonding display frames and cover glass. They can also be used for joining a display panel to a housing. DELO PHOTOBOND LA4860 is a one-component, light-activated urethane polymer adhesive and DELO-PUR SJ9356 is a two ...

DuPont: Stretchable Ink and Film for Smart Clothing

Wilmington, DE — DuPont has introduced its DuPont^™ Intexar^™, a powered smart clothing technology for on-body heating. Intexar Heat is a thin, lightweight and durable heating solution for outdoor clothing that is designed to be integrated easily into garments.

Fairview Debuts Millimeter-Wave End Launch Connectors

Allen, TX — Fairview Microwave has released a new line of high-speed end launch connectors. These are designed for signal integrity measurements, chip evaluations, coplanar waveguide, 25 Gb Ethernet, SERDES, substrate characterization, and test fixture applications.

FRAMOS Offers New SONY CMOS Imager

Ottawa, Ontario, Canada — FRAMOS^® is now offering Sony^® Semiconductor Solutions' IMX211, an ultra-high-resolution CMOS image sensor designed for consumer applications. The 100 MP 0.2 mil (4.6 µm) sensor can also be used for inspection and surveillance applications, including flat panel inspection ...

Gowanda Develops Shielded SMT Inductors

Gowanda, NY — Gowanda Electronics has developed off-the-shelf shielded RF SMT inductors with an established reliability (ER) rating. According to the company, the Gowanda ER5025S is the first-ever shielded ER SMT series. The inductors complement MIL-PRF-39010 qualified product list (QPL) axial-leaded ...

Grieve Builds 550°F Shelf Oven

Round Lake, IL — Grieve has developed its No. 859, a 550°F (288°C) shelf oven currently used for drying powdered resin in trays at a customer's facility. Workspace dimensions of this oven measure 3.7 x 2.5 x 5 ft (1.1 x 0.76 x 1.5m).

HEMCO Intros Hazard Containment Work Area

Independence, MO — Specifically designed for isolating hazardous materials, the HAZMAX containment work area from HEMCO Corporation provides isolation for applications that include equipment distillation procedures, pilot plant requirements, and sampling, weighing and dispensing operations. ...

IQD Intros Low-Power Clock Oscillator

Palm Springs, CA — With the number of electronics applications requiring low-power performance continuing to rise, IQD has launched its new IQXO-610. The IQXO-610 is a 32.768 kHz clock oscillator with ultra-low current draw down to 1 µA typical with no load at 3.3V and 1.5 µA typical with no ...

Ironwood: High-Performance 75 GHz BGA Socket

Eagan, MN — Ironwood Electronics recently introduced a new BGA socket design using high-performance elastomer capable of 75 GHz, low inductance and a wide operational temperature range. The GT-BGA-2076 socket is designed for 2.2 x 2.2 in. (55 x 55 mm) packages and operates at bandwidths up to 75 ...

KRYTAR Launches 90° Hybrid Coupler

Sunnyvale, CA — KRYTAR has launched a new 90° hybrid coupler that delivers 3 dB of coupling over the ultra-broadband frequency range of 4 to 44 GHz in a compact package. KRYTAR's hybrid couplers are designed for many functions, including splitting and combining signals in amplifiers, switching ...

Laser Components Offers 100 mW UVC LED

Bedford, NH — LG Innotek, an industrial partner of Laser Components, has introduced a new 100 mW single-chip UVC LED. The manufacturer states that this development is two years ahead of current industry forecasts. Such a chip was not expected until 2020.