Friday, December 15, 2017
VOLUME - NUMBER
Advertisements
Home/Current Issue >  New Products > 

Kistler Launches Mobile Test System in U.S.

Amherst, NY — The Kistler Group is launching its Schatz mobile testing systems for bolted joint analysis and tool testing in the U.S. Kistler acquired Schatz GmbH in 2016, and has since expanded its bolted joint technology.
Read More
 

LEMO Offers Coaxial Contact for Broadcasting

Rohnert Park, CA — LEMO has introduced a new 3 GHz, 75Ω coaxial contact. The new coaxial contact can be used in various broadcast connector configurations (indoor and outdoor applications) and combines multiple HD-SDI BNC-type connectors into one.
Read More
 

Maxum's Air Blower Drys Complex Shapes

Rochester Hills, MI — Maxum has introduced its Nozzle Bar®, a patented air blow-off device that looks and installs like an air knife, but offers the full air power of individual nozzles. According to the company, the device uses less energy and reaches farther than conventional air knives. Its ...
Read More
 

Microchip Adds Two Embedded Controller Families

Chandler, AZ — The MEC17xx and MEC14xx families of embedded controllers with enhanced serial peripheral interface (eSPI), the host interface supported by the latest PC computing chip sets, are now available from Microchip Technology. Both families support the eSPI bus technology that is required ...
Read More
 

Moticont Intros High-Res Voice Coil Stage

Van Nuys, CA — The compact HCDS-025-038-02-B1-01 voice coil positioning stage from Moticont has a footprint of only 2 in. (54 mm) wide by 5 in. (127 mm) long. The stage has a positioning resolution of 1 µm and a 0.13 in. (3.12 mm) open aperture. This precision cross roller stage has a 0.1 in. ...
Read More
 

Nippon Pulse Releases PCIe Controller Board

Radford, VA — Nippon Pulse has introduced its latest controller board, the PPCIe8443. An upgrade from the company's previous PPCI7443 controller board, the new version has an updated PCI Express bus interface that can control up to four axes of coordinated motion.
Read More
 

PDI Enables Real-Time Data Center Monitoring

Richmond, VA — Power Distribution, Inc. (PDI) has launched its new WaveStar® Infinity monitoring system. The WaveStar Infinity provides data center managers with an advanced power distribution equipment monitoring and metering solution to enable prompt and accurate decisions based on real-time ...
Read More
 

PI Intros Compact Six-Axis Motion Controller

Auburn, MA — PI (Physik Instrumente) has released a compact six-axis servo motor controller, the C-884.6DC. Most precision motion systems are driven by servo motors, because they provide high torque, fast acceleration, smooth motion with a wide dynamic speed range, and responsive start/stop performance ...
Read More
 

RIGOL Presents New Series of Oscilloscopes

Beaverton, OR — RIGOL Technologies has introduced its DS2000E series of oscilloscopes. The series contains scopes at either 100 or 200 MHz bandwidths. All models offer two analog channels with 50Ω input impedance standard.
Read More
 

Saelig: 24-Bit Data Acquisition for HDO Oscilloscopes

Fairport, NY — Saelig Company, Inc., is now offering the Teledyne LeCroy SAM40 data acquisition unit. The SAM40 provides up to 24 analog or digital input channels for low-frequency acquisition and analysis when connected to a four- or eight-channel Teledyne LeCroy 12-bit, high-definition oscilloscope ...
Read More
 

Selco Designs New IoT Electronic Thermostats

Reno, NV — Selco Products has released its eCap series electronic thermostat. These devices are designed to control the temperature in an application, and also to manage most of the energy-consuming components. The eCap series delivers energy savings through the company's latest switching power supply ...
Read More
 

Würth Speeds Access to Component Libraries

Waldenburg, Germany — Würth Elektronik eiSos has integrated component libraries for Altium, Cadence OrCAD and Allegro, CADSTAR, Eagle, LTspice, Modelithics and S-Parameter to create a special service for electronics developers.
Read More
 

WAGO Adds Automated Cutting to Label Printer

Germantown, WI — The new WAGO smartCUTTER automates the cutting of marking material on the company's smartPRINTER. WAGO's thermal transfer printer, a fast terminal block labeling system, is now made even faster by automatic cutting. The compact smartPRINTER (version 1.1) prints and cuts a wide range ...
Read More
 

ASC Capacitors Intros DC Filter Capacitor

Ogallala, NE — ASC Capacitors, a member of the Shizuki Group, has introduced its MEC-DL series of capacitors. The capacitors have been designed to be easy to mount and save space on the PCB. Their lead spacing and compact size provide low inductance — less than 1 nH per mm of lead spacing ...
Read More
 

BLM Group Offers Tube Fabrication Systems

Novi, MI — BLM Group USA is offering its new LT8.10 fiber laser tube cutting system, along with a series of efficient tube-bending machines. These include the company's SMART tube bender, ELECT 102 electric tube bender and the E-TURN 52 electric tube bender, which can load and unload automatically ...
Read More
 

Cicoil Adds Video Resource Center to Website

Valencia, CA — Cicoil has added a flat cable video resource center to its website (www.cicoil.com/tech/videos). The video center contains a wealth of flat cable information, including the history of its development and instructional video tools.
Read More
 

COT Brings Swiss Ergonomics to Bit Holders

Gainesville, GA — Count On Tools, Inc., (COT) is now offering PB Tools' versatile bit holder with a SwissGrip handle. The two-component handle is built to offer exceptional comfort, a pleasant feel and an ergonomic shape. The tool is designed to fit perfectly in the hand and allow fatigue-free working ...
Read More
 

DTS Develops IP68-Rated Data Recorder

Seal Beach, CA — Diversified Technical Systems' (DTS) new SLICE IP68 data acquisition system is designed to capture physical signals in challenging environments. Aimed at applications with size or mass constraints, the device's 2.4 x 2.4 in. (6 x 6 cm) footprint makes it easy to embed in most test ...
Read More
 

Dynatronix Intros Compact DC Power Supply

Amery, WI — Dynatronix has introduced a series of compact, high-performance DC power supplies. The DTX 2400 series includes models with outputs of 0 to 24V at 0 to 100A and 0 to 100V at 0 to 24A. Output is limited to a maximum of 2,400W DC. Five different DTX models are available. Typical applications ...
Read More
 

Electro-Mech Intros Daylight-Readable Switches

South El Monte, CA — Electro-Mech has introduced its SW45090, an illuminated, DPDT switch with a legend designed to be clearly readable in full sunlight (10,000 fc). The switch was co-designed and approved by Aero Safety Systems for cockpit installation in general aviation aircraft.
Read More
 
 
 
search login