Thursday, September 1, 2016
VOLUME - NUMBER
Advertisements
HOME / CURRENT ISSUE >  New Products > 
APEM Intros Game-Style Pendant Controller
Publication Date: 8/15/2016

Vista, CA — APEM, Inc., a manufacturer of miniature and industrial switches, has introduced its PC series of ergonomic game-style pendant controllers. The handheld devices accommodate the company's TS series of miniature proportional joysticks and provide either analog voltage or USB output. The ...
Binder Expands Line of M12 X-Coded Connectors
Publication Date: 8/15/2016

Camarillo, CA — Binder has expanded its M12 X-coded product family with new receptacles, cordsets and feed-through connectors. The X-coded products meet CAT6A specifications with data transmission rates up to 10 Gbps. These high-speed connectors are designed for industrial communications and networks ...
Branson Ultrasonics Offers STTIr® Laser Welding
Publication Date: 8/15/2016

Danbury, CT — Branson's Simultaneous Through-Transmission Infrared® (STTIr®) laser welding offers manufacturers the ability to achieve a clean, clear-on-clear, particulate-free, hermetically-sealed weld. Branson and Sono-Tek have collaborated in developing an advanced technique for precision application ...
CAMI Research Reports Milestone Continuity Measurement
Publication Date: 8/15/2016

Acton, MA — CAMI Research, a provider of cable and harness test systems, has reported that a customer has successfully tested simultaneous, multipoint continuity in a 2 mile (3.22 km) multicore cable rated at 10Ω/1,000 ft, using a CableEye M3UH tester.
CDM Offers Titan Ground Power Cable Assemblies and Plugs
Publication Date: 8/15/2016

Turnersville, NJ — CDM Electronics, an authorized distributor of electronic connectors and cables, now offers Eaton's Titan Ground Power series of cable assemblies and field-replaceable adapters. The assemblies are designed for commercial and military aircraft. According to the company, its advanced ...
ConTech Releases Railway DC/DC Converters
Publication Date: 8/15/2016

Concord, CA — ConTech, a division of Calex, has introduced its RQT series of railway DC/DC converters. The converters offer 20W of fully-regulated output power with nominal railway input voltages of 24 (9-36), 48, (18-75), and 110 (40-160) VDC. Single ouputs offered are 5, 12, 15, and 24 VDC. The ...
Cornell Dubilier Intros Hermetically-Sealed Capacitors
Publication Date: 8/15/2016

Liberty, SC — Cornell Dubilier Electronics, Inc. (CDE) has released its Slimpack, type MLSH, the first in a series of hermetically-sealed aluminum electrolytic capacitors that the company plans to introduce over the next several months. With its glass-to-metal seal that prevents drying out, this ...
Creform Develops Industrial Flow Racks
Publication Date: 8/15/2016

Greer, SC — Creform Corporation now offers durable and customizable flow racks. Built to withstand the rigors of an industrial environment, the racks are constructed of 42 mm (1.65 in.) Creform pipe and joints, and include heavy-duty skatewheel conveyors.
CUI Launches Line of 10W AC/DC Power Supplies
Publication Date: 8/15/2016

Tualatin, OR — CUI has launched a new line of DoE level VI and CoC Tier 2-compliant wall plug-in AC/DC power supplies with integrated USB connectors. The 10W SMI10USB, SWI10NUSB and SWI10EUSB are all designed to meet the stringent average efficiency and no-load power requirements mandated by the ...
Dispense Works: EZ Benchtop Robotic Dispensing System
Publication Date: 8/15/2016

McHenry, IL — Dispense Works has introduced its EZ series of benchtop fluid dispensing robots. All motion and valve/syringe control is integrated into the head requiring no external PC or control box for operation.
ETCO Offers Customized Assemblies for Smart Power Outlets
Publication Date: 8/15/2016

Bradenton, FL — In order to solve a challenge for a manufacturer of smart power outlets, ETCO, a manufacturer of rubber and plastic stamped and molded products, the company removed the ear sections on a GBBA (ground blade bridge assembly) and replaced them with pins that plug directly into a PCB ...
FRAMOS: The Value of Independent Performance Measurements
Publication Date: 8/15/2016

Ottawa, Ontario, Canada — The large number of manufacturers and models and the wide-ranging functionality available in the image processing market often make it difficult for customers to choose the right camera or image sensor for their specific application. Many technical data sheets do not contain ...
Grieve Intros Vertical Conveyor Oven
Publication Date: 8/15/2016

Round Lake, IL — Grieve has introduced its No. 959, an electrically-heated, vertical conveyor oven designed for curing electronics. Incoloy-sheathed, 40 kW, tubular elements heat the oven chamber, while a 6,000 CFM, 5 hp recirculating blower provides downward airflow to the workload.
Heraeus Presents Technology for Foldable Touch Panels
Publication Date: 8/15/2016

Conshohocken, PA — Heraeus has launched a new dry-film resist photolithography fine patterning process for conductive polymer films and is able to use rapid-curing infrared (IR) to create flexible touchscreen displays. The development is a product of a collaboration between Heraeus and Taiwan's Industrial ...
IDT and Cavium Collaborate to Support Data Centers
Publication Date: 8/15/2016

San Jose, CA — Integrated Device Technology (IDT) has teamed with Cavium, Inc., on a reference design that supports the burgeoning workloads of the hyperscale data center. The IDT® DDR4 memory interface solutions are incorporated into the reference design, which is built on Cavium's ThunderX® family ...
Ironwood Intros High-Performance Elastomer Socket
Publication Date: 8/15/2016

Eagan, MN — Ironwood Electronics has introduced a high-performance elastomer socket for 0.65 mm (0.026 in.) pitch BGA packages. The SG-BGA-9002 socket is designed for a 25 x 25 mm (0.98 x 0.98 in.) package size and operates at bandwidths up to 30 GHz with less than 1 dB of insertion loss. The contact ...
Mill-Max Offers Miniature Receptacles for Diverse Applications
Publication Date: 8/15/2016

Oyster Bay, NY — For applications requiring miniature receptacles, Mill-Max has introduced four diverse receptacles designed to meet those needs. The receptacles are suitable for use in high-density configurations down to 1 mm (0.039 in.) pitch.
MOHR Releases TDR Cable Analyzer
Publication Date: 8/15/2016

Richland, WA — Although time-domain reflectometer (TDR) cable testers are prized for their ability to detect and localize cable faults and to measure cable length, until now, they have not been able to characterize the frequency domain microwave/RF performance of cables and connectors like instruments ...
MTS Adds NEC and CEC Approvals to Safety Sensors
Publication Date: 8/15/2016

Cary, NC — MTS Sensors, a division of MTS Systems Corporation, has certified its Temposonics® T-series product line to NEC and CEC Standards 500, 505 and 506. NEC and CEC certifications are used in the U.S. and Canada to ensure that equipment meets specified standards for operating in potentially ...
Nanofocus Launches Probe Card Inspection System
Publication Date: 8/15/2016

McMinnville, OR — Nanofocus has successfully installed its pilot µsprint hp-opc 3000 probe card inspection system at the facility of a large manufacturer of semiconductor elements. The machine performs optical inspection of probe cards, which are special test devices used for standard functional tests of ...
 
 
search login