Sunday, April 23, 2017
VOLUME - NUMBER
Advertisements
Home/Current Issue >  New Products > 

Avnet Adds Compact PicoZed SDR SoM

Phoenix, AZ — Avnet has expanded its PicoZed product family by adding the PicoZed SDR 1x1, a rugged, low-power system-on-module (SoM). The Software-defined radio (SDR) SoM has been optimized for single-channel transmit and receive signal paths in the 70 MHz to 6 GHz range.
Read More
 

BEI Kimco Designs Motors for Robotics

Vista, CA — BEI Kimco has developed new motor designs to meet the torque loads and size requirements of the growing robotics industry. The DIP26-08, DIP30-11 and DIP38-13 frameless motors were created specifically to meet demanding brushless DC (BLDC) requirements in a multi-axis assembly robot for ...
Read More
 

Creform Creates Custom Modular Tool Cart

Greer, SC — Creform Corporation has designed a custom tool cart for an industrial automation builder. The cart was made to hold tools, assembly part and supplies. Its modular design allows the manufacturer to add only the accessories that are needed.
Read More
 

Fujipoly Intros Thermal Gap Filler Pad

Carteret, NJ — Fujipoly® has introduced its SARCON® 30XR-Um thin film, designed for performance and compressibility. The putty-like gap filler pad exhibits a thermal conductivity of 17 W/mK and a thermal resistance of 0.02 °Cin2/W.
Read More
 

Gaia Releases Wide Input Range DC-DC Converter

Sierra Madre, CA — Gaia Converter has released a new family of ultra-wide input voltage range DC-DC converters, designed especially for railway, transportation, aerospace, and military applications. The MGDDI-06 series 12-160V input voltage range covers all typical battery/bus voltages at once (24 ...
Read More
 

Grieve: Electrically Heated Vertical Conveyor Oven

Round Lake, IL — Grieve has developed its No. 906, an electrically heated vertical conveyor oven, currently used for heating aluminum-clad automotive modules at a customer's facility. The oven has a maximum operating temperature of 250°F (121.1°C) and overall workspace dimensions of 36 x 38 x ...
Read More
 

HARTING Expands Connector Compatibility

Elgin, IL — HARTING has expanded the choice of cables that can be used with its Han® 3A connectors. The Han 3A can now be assembled with cable diameters as large as M25, instead of the previous limit of M20. This increase allows the connectors to be configured with any contact insert in the series ...
Read More
 

Heidenhain's Rotary Encoders Protect Equipment

Schaumburg, IL — Heidenhain has introduced a new series of functionally-safe hollow-shaft connection encoders to the manufacturing equipment industry. The ECN/EQN/ERN 400 series of rotary encoders is especially useful for applications in which quick machine shutoff is required in dangerous situations ...
Read More
 

IDT: Power Management IC for DDR4 RAM

San Jose, CA — Integrated Device Technology (IDT®) has introduced an integrated power management IC (PMIC) for enterprise DDR4 NVDIMM applications. The fully-integrated, software-programmable solution can manage all on-DIMM voltage generation, supply switchover, and voltage and current protection. The IDT ...
Read More
 

INGUN Develops Compact Manual Text Fixtures

Lake Wylie, SC — Designed for small PCB testing, INGUN has introduced its MA 350/F, MA 360/F, MA 260/F, and MA 160/F manual test fixtures. The compact test fixtures are robust and easily accessible. The fixtures can contact up to 150 test points with 2.0N spring force per probe.
Read More
 

Ironwood Designs New BGA Socket

Eagan, MN — Ironwood Electronics has introduced its GT-BGA-2061, a high-performance elastomer BGA socket capable of bandwidths up to 75 GHz with less than 1 dB of insertion loss. The socket is designed for 10 x 10 mm (0.4 x 0.4 in.) packages.
Read More
 

Kaman Intros Non-Contact Displacement Sensor

Middletown, CT — Kaman Precision Products has introduced its KD-2306, a single-channel non-contact displacement sensing system. When paired with any of the supported dual- and single-coil sensors, the KD-2306 becomes an easy-to-use, high-precision static and dynamic measuring system. Its DIN rail ...
Read More
 

Keystone Develops New IDC Wire Connectors

Astoria, NY — Keystone Electronics has developed "i-Clamp" insulation displacement connectors (IDC) for wire connectivity. The new devices provide a tamper-proof, quick and reliable method for wire connections without stripping wires. The i-Clamp IDCs cleanly pierce the wire insulation and make a ...
Read More
 

KOA Speer Intros Thick-Film Chip Resistor

Bradford, PA — KOA Speer has introduced its RK73G, a series of high-precision thick-film chip resistors. Compared with the company's general-purpose RK73 series, the new range has an even better TCR of ±50 ppm/°C and its tolerance of ±0.25 percent makes the series suitable for precision designs ...
Read More
 

Melexis Launches ToF 3D Vision Chipset and Eval Kit

Concord, NH — Melexis has introduced a chipset and evaluation kit that simplify and speed the implementation of robust, time-of-flight (ToF) vision solutions for challenging environments. A complete ToF sensor and control solution, the chipset supports QVGA resolution, withstands harsh sunlight, ...
Read More
 

Mill-Max Offers Triple Row Spring-Pin Connectors

Oyster Bay, NY — Mill-Max has expanded its triple row connector series to include long-stroke, through-hole, spring-loaded pins and mating target connectors. The connectors are on a 0.1 in. (2.54 mm) grid and are available in 9 to 96 position configurations. Triple row connectors provide the designer ...
Read More
 

Murata Designs Ultra-Thin Supercapacitors

Smyrna, GA — Murata Americas has developed a line of 0.4 mm (0.016 in.) supercapacitors with mF order capacitance, low ESR and the ability to output power instantaneously. The DMH series is designed as a solution for devices with limited space that have power consumption issues. The series can also ...
Read More
 

Oven Industries Intros Temperature Controller

Camp Hill, PA — Oven Industries (OI) has introduced its 5R9-355 Peltier effect temperature controller. Similar in operation to the company's recently-introduced 5R9-350 model, the new model has enhanced features that include a complete mechanical enclosure with mounting holes, user-friendly keypad ...
Read More
 

PennEngineering: Corrosion-Resistant Standoff Fasteners

Danboro, PA — PennEngineering® has introduced its 400 series of PEM® self-clinching stainless steel standoff fasteners with bright nickel plating. The fasteners are designed to provide corrosion resistance and contribute to an attractive finish in stainless steel assemblies.
Read More
 

PI Intros Linear Motor Stages and Motion Controller

Auburn, MA — PI (Physik Instrumente) has expanded its PIMag® series of high-dynamics linear motor stages with two new models and a new motion controller. Stages are equipped with incremental and absolute-type linear encoders for direct position measurement and ironless three-phase motors and single ...
Read More
 
 
 
search login