Save. Share. Connect.
Sunday, October 22, 2017
VOLUME - NUMBER
The ASSEMBLY Show, MD&M Minneapolis, productronica '17
NEPCON South China '17
ATX East / MD&M '17
SEMICON WEST '17
NEPCON China, SMT/Hybrid Pkg, EWPTE, EDS '17
ATX West and IPC APEX '17
ADM Cleveland and APEC '17
SMTAI and IMAPS '16
SEMICON West '16
NEPCON China '15
ATX WEST/APEX '15
SMTAI, Autotest, ATX MW/MDM and Assembly '14
AATE and IPC MW 11
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
IPC APEX '14
NEPCON China Product Preview '12
SEMICON WEST 10
Electronics West/MDM 11
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
SEMICON WEST 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Multi tradeshow Product Preview '12
ATE and IPC MW 09
Electronics West/MDM 12
NEPCON South China '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
SEMICON West '15
Nepcon South China '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
ATX/MDM EAST '15
SEMICON West '13
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
Atlantic Design/MDM 10
Atlantic Design/MDM 09
ATExpo & IPC MW 08
NEPCON South China '13
Electronic West/MDM 09
SMTAI and productronica '13
AATE/IPC Midwest 10
SMTAI and productronica '13
Atlantic Design/MDM 08
Rehm Relies on YXLON Cheetah for Components Analysis
Roswell, GA — Rehm is now offering customers the opportunity to thoroughly inspect boards with a wide range of inspection equipment. This equipment can be used under professional supervision for fault management. Solder joints can be examined in detail using the new YXLON Cheetah µHD X-ray inspection ...
Rich Sales Opens Technology Center in Guadalajara
Scottsdale, AZ — Rich Sales International and Maquiladora de Servicios MMS have opened a new lab and technology center in Guadalajara, Mexico. The demo center will present the latest in Nordson ASYMTEK technology.
Rogers: Laminates for 5G and Millimeter Wave Applications
Chandler, AZ — Rogers Corporation has introduced its series of CLTE-MW
laminates. These laminates are ceramic-filled, woven-glass-reinforced, PTFE composites. CLTE-MW laminates were developed to provide a cost-effective, high-performance material for circuit designers. This laminate system is ...
Saki Provides Complete 3D Inspection Solution
Fremont, CA — Saki Corporation offers a complete portfolio of 3D automated inspection systems, including 3D AOI, SPI and AXI machines. Electronics manufacturing is a major area of growth for 3D inspection equipment, especially in regards to the smart factory. Industry 4.0 is the next step toward ...
Schleuniger Intros New Crimping Applicators
Manchester, NH — Schleuniger's new Uni-M series of crimp applicators replaces the Uni-S series. The new applicator series provides a broader range of applications with improved delivery times. The Uni-M applicators provide the same ease of set up and precision as the company's previous products. ...
Scienscope Demonstrates Full X-Ray Lineup
Chino, CA — Scienscope International is demonstrating a full range of X-ray systems, including its X-Scope 2000, X-SPECTION 6000 and AXC-800 X-ray component counter, at productronica 2017.
SEHO Focuses on Networked Machines
Erlanger, KY — SEHO Systems is presenting a complete production solution that is designed to optimize the production process. All machines in the line are linked by SEHO's mcServer.
SMT Intros New Reflow Soldering System
Wertheim, Germany — SMT Maschinen und Vertriebs has introduced its latest reflow soldering system, the Quattro Peak
R360. The system includes a new airflow concept, which has very low energy consumption. Reduced distance from the operator to the transport system enables more efficient production ...
Sonics Intros 2,500W Ultrasonic Welding Press
Newtown, CT — Sonics & Materials has introduced its new 2,500W, 15 kHz X-Press ultrasonic welder. The unit is an all-in-one, super-rigid, ultrasonic welding press with a built-in microprocessor.
Sono-Tek Releases Next-Gen Spray Fluxing System
Milton, NY — Sono-Tek Corporation has introduced its new SelectaFlux-A system. This redesigned, improved selective fluxing system is built on the successful SelectaFlux spray fluxing platform that the company has offered for more than 20 years. The system provides the same adjustable spray pattern ...
SPEA Offers Broad Range of Test Equipment
Tyler, TX — From bed-of-nails and flying probe systems to analog mixed-signal testers and MEMS stimulus, SPEA is offering an entire line of test equipment for electronic products. SPEA's flying probe series is designed to cover a wide range of test requirements for electronic boards, offering high ...
Tech-Etch Offers Photo-Etching Brochure
Plymouth, MA — Tech-Etch has released a technical brochure that describes the company's photo-etching capabilities for thin metal parts, board-level shielding and flexible circuits. The company has the flexibility to produce prototype quantities and large production runs of intricate parts. These ...
TopLine: Vibration-Reducing Particle Impact Dampers
Milledgeville, GA — TopLine has introduced a series of particle impact dampers (PIDs) that reduce random vibration in PCB assemblies in harsh environments. Reducing harmful vibrations extends hardware life and reliability. PID is a commercial off-the-shelf (COTS) standard solution that is suitable ...
TRI Showcases All-Around 3D Inspection
San Jose, CA — Test Research, Inc., (TRI) is showcasing its latest 3D automated inspection solutions for PCB manufacturing at productronica 2017. Presenting an integrated solution for the PCB production line, TRI is offering its TR7007QI 3D SPI, along with its 2D and 3D AOI solution, the TR7500QE ...
TRICOR Offers Medical Contract Mfg. Services
Elgin, IL — TRICOR is showcasing some of its products, including an STA (single-tooth anesthesia) delivery system, at MD&M Minneapolis. The company is a medical contract manufacturer for Class I, II and III products. TRICOR is currently producing all three classes of products. The company maintains numerous ...
ULT: Extraction and Filtration for Electronics Mfg.
Löbau, Germany — Using extraction and filtration systems in electronics manufacturing is a statutory requirement. Employees, production equipment and products must be protected from the impact of hazardous emissions. These emissions are generated by laser machines, soldering technology or by gluing ...
VERMES Intros Next-Gen Hot Melt Dispenser
Otterfing, Germany — The next-generation hot melt system solution from VERMES Microdispensing offers multiple options for complex dispensing patterns. The system is designed with precise droplet break-off that ensures ultra-thin lines and beads at high dispensing speeds.
Vi Technology Combines 3D AOI and SPI
Richardson, TX — Vi Technology is presenting the latest innovations from its product line. These include the 5K3D AOI and PI 3D SPI systems. By coupling these two measurement systems, the company's Sigma Line module offers a real-time combination of 3D SPI and 3D AOI inspection measurements. ...
Viscom Showcases 3D AOI and 3D AXI
Duluth, GA — New technology from Viscom is focused on the challenges that arise from increasing production changes and higher volumes, miniaturization and Industry 4.0. The company has introduced its X7056-II automatic 3D X-ray inspection system. It has been developed for extremely high throughput ...
VJE Demos Material Handling Automation
Chelmsford, MA — VJ Electronix is demonstrating a selection of material handling automation systems at productronica 2017. The company is exhibiting its XQuik II Autoload with AccuCount Technology and the Summit II rework system.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM