Save. Share. Connect.
Sunday, June 25, 2017
VOLUME - NUMBER
ATX East / MD&M '17
NEPCON China, SMT/Hybrid Pkg, EWPTE, EDS '17
ADM Cleveland and APEC '17
ATX West and IPC APEX '17
SMTAI and IMAPS '16
SEMICON West '16
NEPCON China '15
ATX WEST/APEX '15
AATE and IPC MW 11
SMTAI, Autotest, ATX MW/MDM and Assembly '14
Electronics West/MDM and IPC/APEX '13
SEMICON West '14
IPC APEX '14
NEPCON China Product Preview '12
Electronics West/MDM 11
SEMICON WEST 10
Atlantic Design/MDM 11
ATLANTIC DESIGN & MFG '13
SEMICON WEST 08
Electronics West/MDM 08
NEPCON China Product Preview '13
Multi tradeshow Product Preview '12
Electronics West/MDM 12
ATE and IPC MW 09
NEPCON South China '16
Atlantic Design/ATX/MDM '16
NEPCON China,SMT/Hybrid Pkg,EDS,EWPTE '16
ATX/MDM West '16
productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis '15
Nepcon South China '15
SEMICON West '15
ATX/MDM EAST '15
EDS, SMT/Hybrid Pkg,Wire Tech Expo '15
SEMICON West '13
NEPCON China, SMT/Hybrid Pkg, EDS, NWPTE '14
Electronics West/MDM 10
ATX Midwest, IMAPS, PCB West '13
ATX West '14
ATExpo & IPC MW 07
NEPCON China '13, EDS, more
SEMICON WEST/Intersolar '12
Atlantic Design/MDM 10
Atlantic Design/MDM 09
NEPCON South China '13
ATExpo & IPC MW 08
Electronic West/MDM 09
SMTAI and productronica '13
AATE/IPC Midwest 10
SMTAI and productronica '13
Atlantic Design/MDM 08
Ascentech Offers New Optilia Inspection Equipment
Chester, CT — Ascentch, the North American distributor for Optilia Instruments AB and for Gen3 Systems, is introducing new products from each company to the North American market. Ascentech is launching Optilia's high-definition camera system and Gen3's solder saver, a solder/dross separation tool ...
Aven Mighty Cam Auto Provides Instant Focus
Ann Arbor, MI — Aven has introduced an addition to its Mighty Cam line of inspection cameras, the Mighty Cam Auto Focus. The powerful inspection camera has been designed to provide instant image focusing.
BTU's Prediction Tool Reduces Cost of Oven Ownership
North Billerica, MA — BTU International's RecipePro is a recipe generation tool that includes convection rate in the recipe generator algorithm, which pairs it well with Pyramax
's closed-loop convection control. The integration of ECD's recipe generator technology into BTU's advanced reflow systems ...
CAIG Laboratories Intros Cleaner and Solder Flux
Poway, CA — CAIG Laboratories has introduced its Deoxit
Gold series along with its CAIG no-clean solder flux. The Deoxit Gold is a metal contact and connector enhancer, cleaner and conditioner. It is designed to improve all metal electrical connections and virtually eliminates any data intermittency ...
CalcuQuote Releases Updated Quote Management System
Dallas, TX — CalcuQuote has unveiled a new version of its quote management system for electronics manufacturing services (EMS) companies. The overhaul includes additional integration with major component distributors, a new and improved user interface and advanced functionality to support consolidated bills ...
Cogiscan's Track, Trace and Control Platform Enables Industry 4.0
Bromont, Quebec, Canada — Cogiscan has developed a track, trace and control (TTC) platform that allows a wide variety of independent manufacturing systems to communicate. The TTC middleware connects with all leading machine and software vendors, offering a modular, highly-configurable and robust ...
Conductive Containers Releases KleanStat Line
New Hope, MN — Conductive Containers has introduced a range of new products in 2016, among them the KleanStat line of ESD-safe packaging products. The packaging products are permanently dissipative, cleanroom compatible, and include a soft, flexible material that can be thermoformed to specification ...
Conecsus Presents SMT Waste Metals Recycling Solutions
Terrell, TX — Conecsus processes wastes primarily containing tin, tin-zinc, lead, silver, gold, and copper, and converts them into usable metal products for sale in the global market. The company's recycling technology benefits SMT/PCB electronics manufacturers by providing a new way of dealing with ...
Count On Tools Becomes Panasonic Total Solutions Partner
Gainesville, GA — Count On Tools has become a partner of Panasonic Factory Solutions Company of America and one of the company's Total Solutions Partners. Count On Tools now provides complementary production solutions compatible with all Panasonic equipment. The company has worked closely with Panasonic ...
CyberOptics Maximizes Yields with MRS-Enabled 3D AOI
Minneapolis, MN — CyberOptics' SQ3000
3D AOI system is designed to maximize ROI and line utilization with multi-view 3D sensors that capture and transmit data simultaneously and in parallel, accelerating 3D inspection speed as opposed to alternate technology.
DEK Delivers Stinger Dispensing Module to Saline Lectronics
Saline, MI — DEK, a part of ASM Assembly Systems, recently installed a Stinger dispensing module for Saline Lectronics' DEK Horizon 03iX printer, which is currently used in a high-volume SMT line. Lectronics plans to add the Stinger to its other DEK printers in the future.
Ersa Offers Rework, Inspection and Vacuum Systems
Plymouth, WI — Kurtz Ersa North America has developed a variety of electronics production equipment, most recently its HR 550 rework system, the Ersa Mobile Scope, i-Con Vario 4, and Smartflow 2020.
Essemtec Intros Compact Pick-and-Place Machine
Glassboro, NJ — Essemtec's new Fox pick-and-place machine is designed for small production environments. With linear motors and a mineral cast frame, the machine provides exceptional speed, stability and accuracy. The system measures 88 x 109 cm (34.65 x 42.91 in.) and accepts PCBs up to 406 x 305 ...
EVS Reduces Solder Consumption by 50 Percent
Isle of Wight, UK — EVS International has added the EVS 8KLF to its line of solder recovery systems, which includes the EVS 500 and EVS 500LF. The simple, yet ruggedly designed EVS 500 can reduce dedrossing time by 75 percent and decrease waste dross by up to 85 percent. The system meshes perfectly ...
Gen3 Offers Cleaning and Contamination Test Systems
Farnborough, Hampshire, UK — Gen3 Systems has developed test and measurement equipment that helps predict the reliability of electronic circuits and systems in the field. The company offers its contaminometer
series, which comprises the CM11+, CM22+, CM33+, CM33L+, CM60 and CMBBT.
Hakko Intros Hot Air Rework System
Valencia, CA — Hakko has introduced its FR-811, an economical rework system with a wide variety of intelligent features, making it a good system for reworking bottom-terminated components. The station can provide and control up to six profile stages, creating a full-scale thermal profile similar ...
Henkel Intros Silicon Sealant for Automotive Industry
Irvine, CA — A brand new silicone adhesive sealant technology from Henkel Adhesive Electronics has been designed to provide both high performance and process flexibility. The new material, Bergquist TLB 400 SLT, is a two-part silicone sealant designed for automotive module applications. With an adaptable ...
Indium Offers Solder Paste and Reinforced Preforms
Clinton, NY — Indium Corporation has developed a halogen-free, no-clean solder paste, Indium8.9HF. The paste is specifically formulated to reduce voiding while delivering high transfer efficiency with low variability. The no-clean paste is good for a variety of applications, especially automotive ...
Inovaxe Intros Smart Rack and Mechanical Cart
Deerfield Beach, FL — Inovaxe has introduced two new products, its SR series of smart racks and its InoBin smart mechanical cart. The smart rack is intended for customers whose main challenge is finding parts quickly and do not need all the features of the InoAuto smart cart. The design is based ...
inTEST Intros IC Temperature Characterization System
Mansfield, MA — Called a "breakthrough in IC temperature characterization," by inTEST, the company's new Temptronic
ThermoSpot benchtop system has been designed to offer temperature forcing without the use of thermoelectric (TE) modules.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM