Save. Share. Connect.
Monday, December 11, 2017
VOLUME - NUMBER
PCB and AUTOMATION
Test and Automation
PCB and Test
Test and Assembly
SMT and Assembly
Assembly and Production
PCB and Production
Assembly and Production
PCB and Assembly
Assembly and Packaging
PCB and Manufacturing
SMT and Production
Test and Measurement
Components and Distribution
Production and Packaging
PCB and Manufacturing
Robotic Dispensing: Keeping a Lid on Costs
By Arnold Fletcher
Today's manufacturing processes call for dispensing fluids that include adhesives, acids, alcohol, anaerobic resins, conformal coatings, cyanoacrylates, oils, grease, lubricants, silicones, gels, solder pastes, sealants, solvents and UV adhesives.
Flux Jet Technology for Lead-Free Soldering
By Richard Burke and Ken Kirby, Speedline Technologies, Franklin, MA
The trend toward environmentally responsible electronics assembly is well-documented. Regulations banning the use of lead, such as Europe's RoHS directive, are driving similar initiatives throughout the world. While many manufacturers have implemented lead-free wave soldering, both ...
X-ray Inspection of Lead-Free Products
By Devonne McPherson, Customer Support Manager, phoenix|x-ray Systems + Services, Inc., St. Petersburg, FL
X-ray inspection of PC boards is most often performed using two dimensional x-ray systems. 2D x-ray inspection systems consist of an x-ray source, detector, and a multi-axis manipulation system for object maneuverability. Images are taken and seen "as is" with little to no calculation ...
Reliability of Embedded Thin-Film NiP Resistors
By Bruce Mahler, Ohmega Tech, Culver City, CA
The use of embedded resistors in multilayer printed circuit boards is increasing at the same time the industry shifts to dielectric materials for lead-free...
Flex Circuits: Meeting Today's Assembly Challenges
By John Talbot, Director of Sales & Engineering, Flexible Circuit Technologies, Plymouth, MN
Challenges in the manufacture of electronic assemblies are common in today's "world is flat" environment. They include cultural differences in the workplace, communication, both time and language...
Small-Batch Automated System on a Budget
By Jonathan Wol, President, Pillarhouse USA, and Darren Smee,Global Process Support Manager, Pillarhouse International (U.K.)
If your customers need short runs that call for highflexibility, plus a mix of lead-free and leaded assemblies, it'spossible to satisfy their demands with...
Budget Priced Systems Meet Small Shop Needs
By Heike Schlessmann, Marketing Manager, SEHO Systems GmbH, Kreuzwertheim, Germany
In spite of the relentless drive toward miniaturization and the increased use of reflow soldering for SMT, there has continued to be a need for wave soldering, even though this process has steadily lost ground to reflow. Continuing miniaturization of products has been the driving force ...
Heavy Wire Bonding: New Standards, New Machines
By Herbert Sturmann, Dipl.-Ing., Hesse & Knipps, Paderborn, Germany
Heavy wire bonding is always at risk from residual vibrations. The industry has long been aware of this problem and has been waiting for much needed improvements in heavy wire bonding technology. Movement of the bonder axes can cause the entire assembly to vibrate (residual vibrations) ...
Embedding ICs Inside PC Boards
By Tom Adams, firstname.lastname@example.org
The idea of putting components inside the printed wiring board instead of on the surface of the board has been around for at least 30 years, although it has been limited to passive components such as the thin film resistive material made by Ohmega Technologies, and more recently the resistor ...
Controlling Reflow Oven Cooling Rates
By Fred Dimock, Manager, Process Technology, BTU International, North Billerica, MA
The mandated removal of lead from the environment motivated the surface mount industry to search for a material to replace eutectic tin-lead solder. The new material had to be compatible with most of the existing components while maintaining good electrical conductivity, strength, and ...
PC Board Makers Must Lead the Revolution
By Nolan Johnson, EDA Product Marketing Manager, Sunstone Circuits, Mulino, OR
The PC board design cycle process can be divided into four capabilities quadrants: Knowledge; Tools; Libraries; and Manufacturing. At Sunstone, we liken these quadrants to an engineering ecology, or ECOsystem
Specifying Fluid Dispensing Equipment
By Al Lewis, Director of Applications Engineering, Asymtek, Carlsbad, CA
Fluid dispensing and coating processes are required for many assembly and packaging operations. These processes provide combinations of electrical, mechanical, and thermal properties to components and assemblies for functionality or enhanced reliability. Common processes are surface ...
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM