Save. Share. Connect.
Thursday, June 21, 2018
VOLUME - NUMBER
PCB and AUTOMATION
Test and Automation
PCB and Test
Test and Assembly
SMT and Assembly
Assembly and Production
PCB and Production
Assembly and Production
PCB and Assembly
Assembly and Packaging
PCB and Manufacturing
SMT and Production
Test and Measurement
Components and Distribution
Production and Packaging
STI's Multifaceted Organization Meets Next-Gen Assembly Needs
By Troy Moore, Systems Design Engineer, STI Electronics
For STI, a multifaceted technical organization that offers electronics assembly, training and other specialized services, flexibility allows it to put customers first and to focus on the highest possible product quality.
Successfully Measuring LED Modules, Lamps and Luminaires
By Mikolaj Przybyla, Managing Director, GL Optic Lichtmesstechnik
In March 2015, the International Commission on Illumiation (CIE) published the first international standard with guidelines on LED light source measurements. Previous standards only addressed measurements of traditional light sources.
Cover and ESD Protection for Shielded Fixture Kits
By Matthias Zapatka, CTO, INGUN USA
INGUN's fixture kits are well-known for their ease of operation and cassette design. Expensive dedicated fixtures can only cover one device under test (DUT). INGUN's fixture kits can be reused for several devices — simply by swapping out the insert, while keeping the same frame and ...
Enhanced Manufacturing Services 4.0 Part 2: NPI Driven by Test Coverage
By Christophe Lotz, President and CEO, ASTER Technologies, LLC
The purpose of any test solution is to maximize test coverage, ensuring that the majority of defects are detected, while minimizing the test cost. If a product is not tested well enough, poor-quality products can be devastating to a manufacturer's reputation. If a product is tested ...
Evaluating EMS Providers from Two Angles: Supply Chain and Engineering
By Jeff Elliott
The ideal contract manufacturer is more than a transactional supplier, but a partner who improves both the product and process. When OEMs outsource PCBs or electronic box build assemblies, the primary criteria when selecting a contract manufacturer have always boiled down to cost, quality ...
Machine Optimization: Is it Artificial Intelligence?
By Bjorn Dahle, President, KIC
Whether we hype it and call it artificial intelligence (AI) or the more modest "machine optimization," reflow oven optimization software is a great example of a smart machine.
New Solder Attach Technologies Streamline Application-Specific Assembly
By the Staff of Interplex Holdings Pte., Ltd.
Manufacturers have been pre-tinning component solder leads for years, but mostly for through-hole technology. SMT and lead-free soldering have made this type of preparation difficult, until now.
Reliability Fundamental to the Reed Relay's Long Success
By Graham Dale, Technical Director, Pickering Electronics
A reed relay, if used correctly, is a near-perfect device with a low-resistance metallic switch path and inherent isolation between the control voltage operating the coil and the signal being switched. Reed relays contain a reed switch, a coil for creating a magnetic field, an optional ...
The Art of Efficient Enameled-Copper Wire Soldering
By Florian Schildein
Tightening thermal requirements for copper wire and connectors, especially in the automotive supply and consumer goods industries, are driving innovation in selective soldering. For more than 20 years, EUTECT
GmbH has been developing and manufacturing selective soldering modules ...
Ultra-Low Frequency Vibration Isolation Stabilizes Scanning Tunneling Microscopy
By Patrick Roberts
The tunable microwave-frequency alternating current scanning tunneling microscope (ACSTM) can record local spectra and local chemical information on insulator surfaces, much like the conventional STM can do for metals and semiconductors. Spectroscopy in the microwave frequency range ...
Creating an Efficient Convection Soldering System with Vacuum and Pyrolysis
By Dr. Hans Bell, Jochen Burkhardt, Marcel Kneer, and Paul Wild, Rehm Thermal Systems
Demand for power electronics systems, such as IGBTs (insulated-gate bipolar transistors), is on the rise. The booming markets of e-mobility, LED-based lighting, photovoltaics, and wind power systems require fast, efficient, high-power electrical switching.
Creating the Best User Experience for Wire Processing Equipment
By Patrick Moroney, Product Marketing Manager, Komax Wire
As consumers, we pay attention to the look and feel of our smartphones, car interiors, kitchen appliances, keyboards, and apps. In fact, when we encounter substandard design, we notice it right away. We demand and expect a good user experience from the products we use in our personal ...
EMI Shielding: Improving Sidewall Coverage with Tilt Spray Coating
By Mike Szuch, Akira Morita and Garret Wong, Nordson ASYMTEK; Mike Sakaguchi and Hiroaki Umeda, Tatsuta Electric Wire & Cable Company Limited
EMI shielding has always been an important component of RF devices, but the demands of today's Bluetooth, Wi-Fi, 3G, LTE, wearable, and IoT devices have created a special set of hurdles for the manufacturing engineer. These devices rely on different radio frequencies that can interfere ...
Enhanced Manufacturing Services 4.0: Philosophy and DfT 4.0
By Chrisophe Lotz, President and CEO, Aster Technologies
Industry 4.0 is the widely-used name for the current trend of automation and data exchange in manufacturing. The concept is being applied by many in order to create the smart factory. Within the modular elements of smart factories, cyber-physical systems monitor physical processes, ...
QA on the Fly - Fast, Accurate AOI and XYZ Measurement
By Dr. Subodh Kulkarni, President and CEO, CyberOptics Corporation
In general, you can have very fast sensors that are not so accurate, or very accurate sensors that are not so fast. Having both at the same time has been critical to CyberOptics' development.
The Economics of Die Attach Voiding in LED Assemblies
By Griffin Lemaster, Dr. Bill Cardoso and Dr. Glen Thomas, Creative Electron, Inc.
Improvements in high-brightness LED technologies are making these devices useful for general illumination. But, before LEDs can completely replace outmoded light sources, their thermal management schemes need to be further developed to ensure consistent color quality and long operational ...
Ambient Shadow Moiré Warpage Measurements Reduce Defect Rates
By Eric Moen, Vice President of Sales and Marketing, Akrometrix
The electronics assembly industry is being challenged with materials, components and assemblies that are more prone to warpage-induced defects both pre-reflow and in-between reflow stages. The majority of traditional warpage and deformation testing has taken place in a controlled environment ...
Flexible Industrial PC Production with SEHO Selective Soldering
By Heike Schlessmann, Marketing Manager, SEHO Systems
In 1983, Siemens Karlsruhe began manufacturing augmented standard PC technology to meet its customers' demanding industrial requirements. The operation has grown to become a 4,500-employee operation, the fifth-largest Siemens AG location in Germany. Optimized production steps carefully ...
Magnetic Attraction: Combining M12 Connectors with Transformers
By Jonas Diekmann, Technical Editor, HARTING Electronics
Transformers play a major role in today's Ethernet communications technology; without them, broadband data transfer with high signal integrity would be nearly impossible. Typically, network devices and cabling sections have to be galvanically isolated from each other in order to protect ...
Smart Reflow: Industry 4.0 is Actually Delivering
By Vitor Barros, General Manager, KIC Europe
Some companies may find the change to Industry 4.0 overwhelming, though it is one of the most exciting developments in the manufacturing industry in decades. It promises vast improvements for both manufacturers and their customers.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM