Save. Share. Connect.
Friday, October 20, 2017
VOLUME - NUMBER
Daily News Archive
Front Page Articles
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Hold Your Fire: How to Ship Lithium-Ion Batteries Safely
By Rob Finn, VP Marketing and Product Management, Labelmaster
Lithium-ion batteries are dangerous cargo. Trouble starts when the separator between the battery's elements is compromised, causing a short circuit. The battery then overheats, reaches its "thermal runaway" point at 302°F (150°C) and bursts into flames.
Saving Time: Collecting Data to Improve Manufacturing
By Jeff Taylor, Regional Sales Manager, Kolver USA
Tulip's manufacturing app platform combines sensors, computer vision, assistive user interfaces and machine learning.
One step every manufacturer can take to help the bottom line is to improve the manufacturing process. Starting with a solution-based mentality or "putting out fires as they appear" neglects examining the process itself. A manager might begin by implementing a program based on a school of thought — lean manufacturing, key performance indicators (KPIs), Kaizen, poka-yoke, etc. This is done in the hopes that an improved mindset will eventually address all of the problems.
One-Stop Repair for Medical Device Manufacturing Equipment
By Dick Puhl
Medical device manufacturing incorporates a range of advanced mechanical, hydraulic and electronic technologies, starting with engineering, and continuing on to fabrication, finishing and assembly. With many enterprises utilizing digital design and prototyping systems, automated fabrication, CNC finishing ...
NEO Tech Collaborates with Aviation OEM for In-Flight Automation
By Steve Heinzen, VP of Marketing, NEO Tech Engineering Services
An aviation industry OEM and its end customer — a major commercial airline manufacturer — envisioned a product that would boost the efficiency of commercial flight crews. The product would have wireless connectivity while operating automatically in the aircraft.
Filling the Retirement Gap Through Hands-On Training
By Mike Prestoy, Senior Manufacturing Engineer, ACI Technologies
There are more talented engineers retiring than there are personnel to replace them. Effective, targeted training is a solid solution to this problem, which helps to fill this growing knowledge gap. Production equipment comes with instructions, but not with the experience that skilled ...
A Center of Excellence: ACI Spurs Industry through Research and Training
By Mike Prestoy, Senior Manufacturing Engineer, ACI Technologies
Uniquely valuable to the electronics manufacturing community, ACI Technologies operates the U.S. Navy's center of excellence in electronics manufacturing. The EMPF (electronics manufacturing productivity facility) focuses on the development, application and transfer of new electronics ...
Man-Robot Collaboration is Reinventing Manufacturing
By Sebastien Schmitt, Robotics Division Manager, Stäubli North America
It's not man against machine, but man and machine working together that is promising to redefine performance in today's industrial factories. Increasingly, robots are being tasked with harsh, dangerous and repetitive jobs that are not fit for humans. As manufacturers look for new ways ...
Holoptica and Loftware Prevent Counterfeiting with Holographic Barcodes
By George Perkous, CEO, Holoptica, and Josh Roffman, VP Product Management, Loftware
Barcode labeling has been largely a manual, time-consuming, expensive, one-off type of process. Box software applications, used on a site-by-site basis, have generally been point solutions that met a specific need or specific use case. However, the labeling process has moved from being application ...
Schaeffler Partners with IBM to Create Cloud-Based Platform
By Gerhard Baum, Chief Digital Officer, Schaeffler and Juergen Henn, Executive Partner, IBM Global Business Services
The migration of data from isolated networks to the cloud is completely changing the way businesses operate and gather information about their products and customers. With recent advances made in the areas of big data and analytics, and in pure computing power, companies can now gather and leverage ...
Siemens Upgrades Inert Technologies' Control Systems
By Bill Ellsworth, Account Manager, Siemens
Managing multiple PLCs from different manufacturers can introduce needless complexity into production. This is especially true when a company, like Inert Technologies, creates highly-customized solutions for each of its OEM customers. Managing multiple controllers complicates procurement, manufacturing ...
Libra Partners with Vizion Solutions for IT Overhaul
By Jenn Kiminas
Managing four world-class EMS facilities is a complex task. From its various locations Libra Industries must provide its customers with services that range from simple PCB production to complete system builds. In order to more effectively monitor and control all four facilities, the company partnered ...
Canine Protective Vest Maker Chooses Sonobond Equipment
By Melissa Alleman, Vice President, Sonobond Ultrasonics
When a Canadian manufacturer of protective vests for working dogs sought to guarantee that its canine users had personal protection comparable to that of their human counterparts, it added Sonobond's SeamMaster
high-profile ultrasonic sewing machine to its manufacturing process. ...
BellHawk Systems Provides WIP Tracking
By Peter Green, CTO, BellHawk Systems Corp.
When three electronics manufacturers approached BellHawk Systems looking for a WIP (work-in-progress) tracking system for quick-turn manufacturing operations in the U.S., they considered two options: RFID or barcodes. Each of these options had a similar problem; they were unable to track, in real ...
Glenbrook's Micro-Fluoroscopy Aids in Dysphagia Research
By Jim McMahon
The University of Missouri School of Medicine research laboratory is now using a new system employing, high-resolution micro-fluoroscopy technology, developed and patented by Glenbrook Technologies, which enables researchers to view the swallowing function of mice while eating and drinking. This ...
Staying Competitive in Today's Challenging Production Environment
By Juli Fortune, EDSYN, Inc.
Competition is generally good, however, it can strangle innovation and lead to a loss of focus as manufacturers strive only to produce "the next best thing." For companies that are driven by competition alone, the words of author Edward Abbey may prove alarmingly prophetic. "Where all think alike ...
Finding the Perfect Partner
By Terry Morgan, CEO, Voxvia
All sizes of SMT equipment manufacturers (OEMs) and consumable materials makers will rely on a network of "channel partners" at some point. These partnerships take many forms, ranging from a one-man-band to countrywide distributers; or even super-distributors working across continents.
Measuring Hard-Hitting Boxers in Training
By Mike Skinner, Assistant Editor
Popular in gyms and movies of prizefighters in training, the long, cylindrical punching bag has always looked the same. But the era of the naked punching bag may be drawing to a close. Now it can dress up in some special clothing, a form of wearable electronics containing sensors. The idea is to let ...
3D Systems and Penn State Launch Partnership
3D Systems, Inc.
DARPA is pushing the envelope for developing the growing technology of direct 3D metal printing. In a display of technological foresight, 3D systems (3DS) and Pennsylvania State University have partnered to support the U.S. aerospace and defense industry in the adoption of direct metal printing. The ...
Creating Designs in Half the Time
Thomas Besser (left), Team Leader for the CAE Centre of Excellence for BilfingerGreyLogic, explains that a good portion of a design project can be handled with the help of an automated design process and tools like the EEC One software from EPLAN.
By Ed Sullivan
Gaining competitive advantages may not come easy for a manufacturer of complex control cabinets. But by automating their design processes, BilfingerGreyLogix (www.greylogix.com), based in Flensburg, Germany, is cutting the time needed for schematic creation by one-half. The firm is working with the EEC One design software from Eplan (
) to save time without sacrificing design ingenuity and quality.
Ultrasonic Metal Tube Drawing System Produces Fine Internal Finishes
By Janet Devine, President, Sonobond
Fine finishes in metal tubing are essential in some applications, such as in the metal tubing used in medical syringe needles as well as for medical devices and tubing products used in many other industries to transport critical fluids. Fortunately, the Tube Drawing System and related ...
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM