Save. Share. Connect.
Thursday, October 19, 2017
VOLUME - NUMBER
Electronic Mfg. Products
BTI Installs Complete Apex SMT Line
Lanham, MD — Boyce Technologies, Inc., (BTI) has installed an SMT production line from Apex Factory Automation. After an extensive process, Charles Boyce, president of BTI, and his team selected an SJ Inno Tech stencil printer with onboard 3D SPI, a Mirai pick-and-place model MR20LP with linear motors ...
BTU Installs Demo Reflow Oven at NextFlex
North Billerica, MA — BTU International has installed a PYRAMAX
100A demo unit at NextFlex. A public-private consortium of companies, academic institutions, nonprofits, and government programs based in Silicon Valley, NextFlex's mission is to advance U.S. manufacturing of flexible hybrid electronics ...
Dow Corning Launches Moldable Optical Silicones
Auburn, MI — Dow Corning has added to its portfolio of LED solutions with the launch of three new high-performance products under the Dow Corning
label: MS-4002, MS-4022 and MS-4007 moldable optical silicones. Offering enhanced optical, mechanical and processing properties, the new products broaden ...
EPE Adds HALT and HASS Capabilities
Manchester, NH — EPE Corporation is strategically adding advanced environmental stress screening capabilities with a HALT and HASS system from Cincinnati Sub Zero (CSZ).
EPLAN and PLM Alliance: SAP Engineering Control Center
Schaumburg, IL — PLM Alliance, which comprises SAP development partners that include EPLAN and sister company CIDEON, participated in the SAPPHIRE NOW
and ASUG Annual Conference in mid-May in Orlando. The partners showcased their integrated live engineering approach for SAP
product lifecycle management ...
ETC Offers SMT Feeder Calibration System
St. Charles, IL — Poorly-performing feeders are a common cause of placement machine downtime. Errors in feeder calibration can result in mis-picks, component waste and even machine damage. Electronic Technology Corporation (ETC) has developed an SMT feeder calibration system, which allows users to ...
Europlacer Launches Pick-and-Place System
Tampa, FL — Europlacer has launched its latest pick-and-place machine, the iineo+. Based on the company's iineo platform, the new machine includes an integrated electrical tester, a new operating system, multicore processing, and an improved operator interface, as well as optional upgrades for enhanced ...
Fujipoly Develops Extremely Soft TIM
Carteret, NJ — Fujipoly
has developed a new thermal interface material (TIM). Sarcon
PG80A is a soft and high-performing thermal gap filler pad. The 13 W/m-K putty-like material requires very low compression force at high compression rates, allowing it to conform gently to most component shapes ...
Green Circuits Adds Vi Technology's Inspection Suite
Richardson, TX — Green Circuits, Inc., a Silicon Valley-based full-service contract manufacturer, has obtained Vi Technology's entire suite of AOI, SPI and process management solutions.
Hanwha: Assembly Solutions for LED Big Boards
Cypress, CA — Hanwha Techwin Automation, formerly Samsung C&T Automation, offers sales, service and support of precision assembly line solutions for LED big board applications, including PCBs with lengths of 1.2 and 1.5m (3.9 and 4.9 ft).
HELUKABEL's Control Cables Pass UL Cold Bend Test
Elgin, IL — HELUKABEL has had seven cables in its TRAYCONTROL family of products pass the UL -40°C (-40°F) cold bend test. The company has also enhanced the cables' conductor temperature ratings from 90° dry/75°C wet (194°/167°F) to 90°C (194°F) dry/wet.
Hemco Intros Walk-In Hoods and Air Filters
Independence, MO — Hemco has expanded its UniMax series of fume hoods to include models with fire suppression systems that meet California requirements. Standard models range from 6 to 24 ft (1.8 to 7.3m) wide, 4 to 8 ft (1.2 to 2.4m) deep and 7 to 16 ft (2.1 to 4.9m) high. Tall equipment, distillation ...
Inovaxe Integrates Panasonic's MES Software
Rolling Meadows, IL — Across the industry, efforts are focused on transforming the manufacturing process from isolated silos into a lean, agile and integrated ecosystem underpinned by connectivity. The true vision of Industry 4.0 depends on connectivity that creates visibility.
Kurtz Ersa Spurs Dynalab's Continual Growth
Plymouth, WI — Dynalab has made great strides over the past few decades, having grown from a small wire harness assembly operation into a full-scale electronics manufacturing company. Dynalab relies on partners whose low-maintenance, high-quality equipment runs reliably for many years. This focus ...
MacDermid Enthone Releases ENIG Process
Waterbury, CT — MacDermid Enthone Electronics Solutions has released its Affinity 2.0 high-reliability, low-variation electroless nickel immersion gold (ENIG) plating process. Affinity 2.0 has been developed to meet stringent reliability requirements, while providing significant cost benefits.
MicroCare Develops High-Performance Flux Remover
New Britain, CT — MicroCare has introduced its Tergo
high-performance flux remover, a nonflammable, low-temperature vapor degreasing fluid formulated for high-volume production cleaning of PCBs in automated vapor degreasing systems. The cleaner is designed for fast, thorough cleaning at low cost ...
Mill-Max Intros Rugged Spring-Loaded Connector
Oyster Bay, NY — Mill-Max has introduced a ruggedized long-stroke 4 mm (0.16 in.) pitch spring-loaded connector (SLC) developed for applications in harsh environments. The 858 series is suitable for applications where the connector will experience side loading, variation in vertical engagement, high ...
Mycronic Expands MYPro Pick-and-Place Series
Rowley, MA — Mycronic has expanded its MYPro series of pick-and-place systems with its high-capacity MY300 machine. The MY300 SMT machine is the second release in the company's MYPro series. Recently, the company launched its MY700 high-speed jet dispenser for solder paste and assembly fluids. The ...
PDR Expands IR-E3 Evolution Rework Series
Shingle Springs, CA — PDR is now offering three models that make up its IR-E3 Evolution series of SMD/BGA rework stations. The PDR IR-E3G has been the company's top-selling station for many years. The versatile system is suitable for a wide range of applications on small PCBs. The systems are now ...
Qualitel Implements Aegis MES Software
Horsham, PA — Qualitel Corporation has implemented Aegis' FactoryLogix
manufacturing execution system software (MES) at its Everett, Washington, facility. The MES system will be used to provide full traceability and online work instructions for Qualitel's NPI, CCA production and box-building ...
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM