Saturday, April 29, 2017
VOLUME - NUMBER
Advertisements
Home/Current Issue >  Electronic Mfg. Products > 

DELO Intros High-Rel Electronic Adhesive

Sudbury, MA — DELO has introduced an easy-to-handle electronic adhesive for use on high separating walls between sensors that have small space widths and chip encapsulation. DELOMONOPOX GE7985 is designed for automotive and industrial applications where high reliability is required in combination ...
Read More

Dymax Launches Peelable PCB Maskant

Torrington, CT — Dymax Corporation recently launched its SpeedMask® 9-7001, a light-curable maskant designed to protect connectors and board-level areas from both solvent-based and light-curable conformal coatings. Cured masks withstand wave solder and reflow temperatures and are easily removed ...
Read More

EAR Adds Hitachi X-ray Fluorescence Spectrometer

Buffalo, NY — Eastern Applied Research (EAR), an authorized distributor for Hitachi High-Tech Science Corporation, has added the Hitachi FT-150 Micro-XRF spectrometer to its Western New York facility. The Hitachi FT-150 is designed for thin-film measurements and micro-spot analysis. The system is ...
Read More

EMS Develops Dry-Film Negative Photoresist

Delaware, OH — Engineered Material Systems (EMS) has developed its DF-3560 dry-film negative photoresist for use in MEMS, wafer-level packaging and CMOS applications. This material formulation has been optimized for hot roll lamination and processing on MEMS and IC wafers.
Read More

EPE Adds ASYMTEK Spectrum Dispensing System

Manchester, NH — EPE Corporation has purchased a Nordson ASYMTEK Spectrum S-920 automated fluid dispensing system and installed it in its facility in Manchester, New Hampshire. According to the company, the equipment fits into its existing capabilities as a high-reliability electronics manufacturer ...
Read More

EPLAN Upgrades Wire Harness Engineering Software

Schaumburg, IL — EPLAN has launched its Harness proD version 2.6, an intuitive 2D/3D wiring and wire harness engineering software platform. New features include enhanced automatic wire and dimensioning, and intuitive routing of wires with predefined lengths. Open interfaces allow for collaboration ...
Read More

Epoxies, Etc. Intros Thin-Film Conductive Adhesive

Cranston, RI — Epoxies, Etc., has developed a fast-curing, thin-film conductive adhesive, 40-3907. Electrically conductive adhesives that cure at room temperature are well-suited for bonding and sealing applications that cannot use extra heat to cure the material. A downside to many of these materials ...
Read More

Gore Offers Aerospace Cables and Assemblies

Newark, DE — W.L. Gore & Associates offers a full line of high-performance GORE® aerospace cables. These cables and assemblies are engineered to meet the civil aerospace industry's increasing demand for faster digital networks, higher performance, higher quality in-flight entertainment and connectivity ...
Read More

iTAC Intros Smart Factory Software

Southfield, MI — iTAC Software is offering a variety of advanced planning and scheduling, business intelligence, and real-time factory dashboards. The next revolution in manufacturing involves the creation of smart factories that use Internet of Things (IoT) solutions to achieve new levels of productivity and ...
Read More

Laser Components Adds RS-232 to INTEGRA Detectors

Bedford, NH — Laser Components has improved its INTEGRA series of laser power and energy detectors by adding an RS-232 interface, in addition to the standard USB port. Often, production facilities and processing machines do not have USB interfaces available, or they cannot be used in system-critical ...
Read More

Leading2Lean: Multi-Facility Traceability

Reno, NV — Leading2Lean has introduced its TraceCloud, a new CloudDISPATCH engine designed to identify possible manufacturing problems across disparate systems in different facilities. TraceCloud eliminates the cost and risk of removing existing traceability systems and replacing them with a standardized system ...
Read More

MacDermid Develops DC Acid Copper Plating Process

Waterbury, CT — MacDermid Enthone Electronics Solutions has released its MacuSpec HT 360, a state-of-the-art DC acid copper plating process. The process offers excellent micro-distribution at high current densities while avoiding the capital expense of pulse plating rectifiers.
Read More

Memcon: Switch Components and Flexible Technology

Stevensville, MI — Memcon is offering an array of electronic and medical device components, as well as other applicable parts for membrane switches, touchscreens and flexible circuits.
Read More

MicroCare Intros Versatile Flux Remover

New Britain, CT — MicroCare Corporation has developed its Tergo high-performance flux remover, a non-flammable, low-temperature rinsing fluid with a non-volatile cleaning additive. The formulation is specifically designed to clean challenging, high-temperature solder pastes and fluxes and to ...
Read More

Multitest Expands Package Range of Placement Systems

Norwood, MA — Multitest, a division of Xcerra, has expanded the package range of its MT9510 and MT2168 pick-and-place handler platforms to devices smaller than 3 x 3 mm (0.12 x 0.12 in.). According to the company, the expanded package ranges now exceed the typical ranges of other pick-and-place systems ...
Read More

NAMICS Develops Sintered Silver Adhesive

San Jose, CA — NAMICS has developed and released a sintered silver die attach paste, UNIMEC H9890-6A, for the semiconductor market. The low-temperature sintered die attach paste incorporates the company's metallo-organic (MO) technology. The highly thermally conductive paste does not require pressure ...
Read More

NEO Tech Builds Battery Packs for ISS

Chatsworth, CA — NEO Tech has assembled six lithium ion battery orbital replacement units (ORUs) for Aerojet Rocketdyne that were launched successfully into space for installation on the International Space Station (ISS). The new battery cell is a third-generation lithium ion cell that has been designed ...
Read More

Nordson MARCH Intros Plasma Deposition System

Concord, CA — Nordson MARCH has introduced its PD series of plasma deposition systems. The systems use plasma polymerization to deposit thin films during precision manufacturing and assembly processes, changing the surface characteristics of a substrate.
Read More

PCi Purchases Keyence Dimensional Measurement System

Minneapolis, MN — Rigid flex circuit board manufacturer Printed Circuits, Inc. (PCi) has purchased an IM-6225 instant measurement system from Keyence. The machine offers high-speed, accurate dimensional measurements in a small format that is well-suited to measure flex and rigid PCBs.
Read More

Plasma-Therm Supplies Dicing System to ASE

St. Petersburg, FL — Plasma-Therm has been selected by Advanced Semiconductor Engineering (ASE) Group to provide a plasma dicing system to ASE's Chung-Li, Taiwan, facility. The plasma dicing on tape (PDOT) production system is available for customer demonstrations, development and prototyping. The Singulator ...
Read More
 
 
search login