Sunday, June 25, 2017
VOLUME - NUMBER
Advertisements
Home/Current Issue >  Electronic Mfg. Products > 

ClassOne Aims to Lower Cost of Electroplating

Kalispell, MT — ClassOne has launched an initiative that aims to reduce the costs of operation (CoO) of copper plating processes. The company aims to lower costs by reducing chemical consumption, extending the life of consumables and equipment parts, increasing and optimizing throughput, and enhancing ...
Read More

Creative Materials Intros Conductive Inks and Adhesives

Ayer, MA — Creative Materials has introduced a line of conductive inks and adhesives designed for use with aerosol jet processing equipment, such as the Optomec® aerosol jet system. Benefits of the system include non-contact printing, fine lines down to 100 µm, rapid prototyping, and continuous ...
Read More

Dow Corning Develops UV Optical Bonding Material

Midland, MI — Dow Corning has unveiled a UV-curable optical bonding material designed to enhance the reliability and performance of automotive displays. VE-6001 was developed to deliver higher thermal stability than organic materials, and its one-part silicone chemistry makes it easy to process. ...
Read More

Dymax Releases Low-Viscosity Conformal Coating

Torrington, CT — Dymax has introduced its Multi-Cure® 9482-FC, a conformal coating developed as an alternative to thin, solvent-based conformal coatings. With a viscosity of 20 cP, the 100 percent solids material provides a thin coating that is more environmentally-friendly than solvent-based products ...
Read More

EMS Intros Conductive Adhesives for Solar Modules

Delaware, OH — Engineered Materials Systems (EMS) has introduced its CA-150 series of snap-cure, low-cost conductive adhesives. The adhesives are designed to string and shingle crystalline silicon and heterojunction solar modules.
Read More

Epec Adds Expedited Ordering to Customer Portal

New Bedford, MA — Epec Engineered Technologies has updated its recently-released, web-based customer portal by adding an order expediting feature. The company implemented the feature to allow customers to change the delivery schedules of their orders, in addition to seeing the status of placed orders. Since ...
Read More

Epoxies, Etc. Intros Thermally Conductive Potting Compound

Cranston, RI — Epoxies, Etc. has introduced its 50-2369 flame retardant, thermally conductive polyurethane potting compound. The compound is formulated to dissipate heat away from electronic components and to provide protection for devices in harsh environments.
Read More

ETEL Offers Entry-Level Rotary Module

Schaumburg, IL — Motion systems control manufacturer ETEL, exclusively distributed in North America by HEIDENHAIN Corporation, has introduced its DXR+ direct drive rotary module. The DXR+ is available as a standalone, entry-level rotary module. The rotary module has been designed to be compact, lightweight ...
Read More

FlexLink Launches High-Speed Laser Marker

Allentown, PA — FlexLink has launched its GENIUS 1-LD, a high-speed laser marker that incorporates a dual-laser head along with multiple cameras to reduce cycle time. PCBs are positioned vertically inside the module, allowing the two laser heads to mark both sides of each board simultaneously. The ...
Read More

Fujipoly Intros Elastomeric Display Connector

Carteret, NJ — The Zebra® 1002 carbon connectors from Fujipoly® are designed to offer electronic device manufacturers an affordable and reliable option for connecting PCBs to a variety of LCD screens.
Read More

Imagineering Releases AS9100 PCB Buyer's Guide

Elk Grove Village, IL — Imagineering has released a new ebook entitled "The Printed Circuit Buyer's Guide to…AS9100 Certification." Written by Imagineering CEO Khurrum Dhanji, the ebook is the first book in an ongoing series of micro ebooks specifically dedicated to educating the PCB design, fabrication and ...
Read More

MacDermid Develops Electroless Copper Metallization Process

Waterbury, CT — MacDermid Enthone Electronics Solutions has released its M-Copper EF process, a premium-quality electroless copper metallization process. With its low cost of ownership, the M-Copper EF addresses high-volume, low-cost electroless copper applications. The metallization process is designed to ...
Read More

Mecal by Starn Now Preferred Samtec Partner

Meadville, PA — Mecal by Starn has been selected as the preferred partner supplier and partner for all Samtec terminal applicators. The company will build and support applicators to run all terminals made by Samtec, Inc., a global manufacturer of electronic interconnect solutions. The geometry of ...
Read More

Meggitt Troubleshoots with Handheld Transducer Simulator

Irvine, CA — Meggitt Sensing Systems has launched its Endevco 4830B handheld transducer simulator. The device is designed to aid in the troubleshooting and calibration of test systems. The portable, battery-operated signal generator can be used to verify system setups before running expensive vibration ...
Read More

Microscan Upgrades Online Barcode Generator

Renton, WA — Microscan has upgraded its free, online barcode generator, which is a tool that allows users to create, save and e-mail custom barcodes. From linear to stacked and 2D symbols, 28 different barcode types are now available on the company's website. While not intended as a professional ...
Read More

Mill-Max Intros Low-Profile Target Connectors

Oyster Bay, NY — Mill-Max has introduced its lowest-profile target connectors to date, with an above board height of 0.87 in. (2.21 mm). Target connectors are used in place of SMT pads on a PCB as the mating surface for spring-loaded pins. They offer durability and are useful for achieving specific ...
Read More

Minds Mechanical: Manufacturing and Metrology Software

Encinitas, CA — Minds Mechanical has introduced its Intelligent Manufacturing and Inspection (IMI) software. The software is a server-based platform that designed to bring the entire manufacturing and metrology cycle under one roof. IMI streamlines the process of uploading, sharing, inspecting, and ...
Read More

Nano Dimension Supplies 3D Printer to PCB Designer

Ness Ziona, Israel — Nano Dimension has supplied its flagship Dragonfly 2020 3D printer to a PCB design bureau located in Israel. The design company helps a broad range of clients in the design and manufacture of PCBs. This latest customer joins the growing ranks of Nano Dimension's beta customers ...
Read More

ON Semiconductor Accelerates Cloud-Based IoT

Phoenix, AZ — ON Semiconductor has introduced its IoT development kit (IDK), a cloud-based configurable platform used to develop IoT systems. Consisting of both hardware and software elements in a modular construction, the IDK enables engineers to evaluate, develop and release highly-differentiated ...
Read More

PACE Intros Convective and Infrared Rework System

Vass, NC — PACE Worldwide has introduced its ST 925, a convective and infrared system for SMT rework. The machine combines three popular PACE products together into one convenient, low-cost rework system. The system comprises the ST 325 programmable convective/hot air rework station, the PH 100 low ...
Read More
 
 
search login