Save. Share. Connect.
Tuesday, January 23, 2018
VOLUME - NUMBER
Electronic Mfg. Products
Sanmina Provides High-Speed Flex/Rigid Circuit Assembly
San Jose, CA — Sanmina Corporation's backplane and cable division has developed new flex and rigid flex circuit assembly capabilities for military and aerospace electronics equipment. This new technology combines the latest laminates, high-performance military and aerospace connectors and Sanmina ...
Technic Creates Flexible Solder Mask for Direct Imaging
Cranston, RI — Technic has announced the release of TechniFlex LCL1000F/423M, an extremely durable, direct imaging, fine pitch, matte black solder mask for flexible applications.
Teledyne DALSA Manufactures Advanced MEMS
Waterloo, Ontario, Canada — Teledyne DALSA Semiconductor offers advanced MEMS technologies and high-volume manufacturing on both 5.9 in. (150 mm) and 7.9 in. (200 mm) wafers. The company delivers complete solutions from prototype to mass production.
Verotec Supports DLS Xspress4 Development Project
Manchester, NH — Verotec is supplying highly-customized KM6-HD-based EMC-screened systems to the Diamond Light Source (DLS) national synchrotron science facility in the U.K. DLS generates intense beams of synchrotron light at wavelengths ranging from X-rays to the far infrared. These beams are used ...
AEMC Intros Indoor/Outdoor Voltage Testers
Foxborough, MA — Compliant with IEC 61243-3 Edition 2, AEMC's new C.A 771 and C.A 773 VAT voltage testers can be used to work on any 1,000V CAT IV installation. They are rated IP65 and meet Koppen-Geiger type-S extended climatic class requirements for indoor and outdoor use, including extreme conditions ...
AES Replaces Legacy GSM-5 Gas Safety Monitor
Malvern, PA — Applied Energy Systems (AES) has introduced the GigaGuard
controller to replace its GSM-5
gas safety monitor. The GSM-5 is a legacy technology from the company's SEMI-GAS
line of ultra-high-purity gas delivery systems.
AIC Creates Online Product Configurator Tutorial
West Warwick, RI — Advanced Interconnections Corporation (AIC) has created a new video that shows how to quickly build an application-specific connector part number with its Build-A-Part
CAMI Intros CableEye USB Type-C Test Fixture
Acton, MA — CAMI Research has released a USB Type-C test interface board for its CableEye
cable and harness testing systems. Populated with two USB-C female connectors, the daughter board allows users to continuity-check USB Type-C terminated cables using the CableEye tester while seeing the connectors ...
COT Expands Fuji NXT Nozzle Series
Gainesville, GA — Count On Tools (COT) has expanded its Fuji NXT nozzle series for the new H24 mounter head. The high-speed head from Fuji is designed to improve productivity over previous models. The company's standard nozzles complement this mounter to provide increased reliability and performance ...
Electronic Assembly Offers Compact OLED Displays
Gilching, Germany — Electronic Assembly has introduced a range of compact OLED display screens. The monochromatic displays now come in a variety of different sizes, profiles, resolutions and colors to suit various uses. Applications include wearables, pocket instruments and other devices that require ...
EMS Intros Dry-Film Negative Photoresist
Delaware, OH — Engineered Material Systems (EMS) has introduced its DF-3590 dry-film negative photoresist for use in microelectromechanical systems (MEMS), wafer-level packaging and CMOS applications (TSV sealing). This material formulation has been optimized for hot-roll lamination and processing on MEMS and ...
EPLAN Preplanning 2.7 Adds Piping Module
Schaumburg, IL — EPLAN has added a piping module to the 2.7 release of Preplanning, adding a powerful tool for accelerating the initial phase of engineering machines, production lines and entire plants. Using EPLAN Preplanning, the acquisition and definition of project information and planning helps to structure ...
EpoxySet Offers UL-Approved Potting Compound
Lincoln, RI — EpoxySet is now offering its EP-207, a thermally conductive epoxy potting and encapsulating compound for electronics and heat dissipating devices. This room-temperature curing system is UL94 V-0 yellow card listed with excellent electrical insulating properties and high dielectric strength ...
Fancort Intros Versatile Robotic System
West Caldwell, NJ — Fancort has introduced its Dobot M1, a professional SCARA-based robot designed for light, high-volume industrial manufacturing. With its extremely versatile interchangeable tool heads, the Dobot M1 is not only usable as an arm, but as a 3D printer, laser engraver, gripper, and ...
Fujipoly Develops Low Thermal Resistance TIM
Carteret, NJ — Sarcon
PG25A is one of Fujipoly's softest and best-performing TIM (thermal interface material). This gap filler pad is designed for applications that have delicate components and high compression rates.
German RepRap Creates Liquid PU Material
Coral Gables, FL — German RepRap, in collaboration with ebalta Kunststoff, has developed a new polyurethane (PU) material that can be used for additive manufacturing. According to the companies, for the first time ever, the material can be processed by a 3D printer in its liquid state, thus eliminating ...
Mill-Max Adds New Spring-Loaded Connectors
Oyster Bay, NY — Mill-Max is expanding its spring-loaded solder cup connector series with new versions that deliver over 60 percent more stroke than the existing series. The single-row 824-22-0XX-00-005000 and double-row 826-22-0XX-00-005000 provide a mid-stroke of 0.045 in. (1.14 mm) and a maximum ...
Nordson DIMA Rolls Out New Website
Deurne, The Netherlands — Nordson DIMA has launched a new website, www.nordsondima.com. The newly-designed site makes it easier for visitors to learn about the company's full line of hot bar reflow soldering, heat seal bonding, ACF laminating, and heat staking solutions. A second website, www.dimadispensing ...
PPI-Time Zero Opens New England Facility
Norwood, MA — PPI-Time Zero recently completed a state-of-the-art facility in Norwood, Massachusetts, and celebrated its grand opening earlier this year. The ribbon cutting ceremony was attended by representatives from the Neponset Valley Chamber of Commerce, state and local officials, regional customers ...
Rogers Offers New Substrate Materials and Plating
Rogers, CT — Rogers Corporation's Power Electronics Solutions (PES) group is now offering its curamik
ADVANTAGE family of features and process enhancements for curamik ceramic circuit substrate materials.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM