Thursday, June 29, 2017
VOLUME - NUMBER
Advertisements
Home/Current Issue >  Electronic Mfg. Products > 

MC Assembly Purchases YESTECH AOI System

Melbourne, FL — MC Assembly has enhanced its inspection capabilities with the purchase of a Nordson YESTECH FX940 ULTRA 3D automated optical inspection machine. The new upgrade enables 3D inspection of PCB assemblies for quality control during MC Assembly's SMT operations.
Read More

Mycronic Launches High-Speed Jet Dispenser

Rowley, MA — The new MY700 high-speed jet dispenser for jet printing solder paste and dispensing assembly fluids is the first release in Mycronic's next-generation MYPro series product lineup. As part of the high-productivity MYPro series, the MY700 is designed to process any type of circuit board ...
Read More

Nano Dimension Integrates Zuken Software

Ness Ziona, Israel — Nano Dimension and Zuken have joined forces to enhance Nano Dimension's 3D printing user experience and prototype turnaround times. Nano Dimension will take advantage of the support for implementing electronic technologies provided by Zuken's native 3D, system-level design solution ...
Read More

Panasonic Launches Custom Tooling Website

Rolling Meadows, IL — Panasonic Factory Solutions Company of America has launched a new online resource for manufacturers, allowing them to quickly match non-standard components to the appropriate custom tooling needed in their electronics assembly processes. The website can be found at www.panasonicfa ...
Read More

Polyonics Offers Flame Retardant Polyimide Tapes

Westmoreland, NH — Polyonics manufactures a wide variety of flame retardant single- and double-coated polyimide tapes. The engineered tapes are used in virtually all industries where engineers need to insulate, isolate, bond or protect electrical devices, while also protecting against the spread ...
Read More

Printed Circuits Upgrades Equipment Lineup

Minneapolis, MN — Rigid flex circuit board manufacturer, Printed Circuits has enhanced its equipment lineup. The investment is expected to increase capacity, improve technical capability and reduce process time for the company's customers.
Read More

Pro-Active Engineering Now ITAR-Certified

Sun Prairie, WI — Pro-Active Engineering has completed its International Traffic in Arms Regulations (ITAR) certification process. The ITAR registration allows the company to offer its manufacturing services to government defense projects.
Read More

RapidProto Offers Quick PCB Prototyping

Indianapolis, IN — RapidProto is now offering one- to three-day production-quality assembly options to speed product development. Using the latest equipment and technology, a high-level ERP system, technician-level assemblers, quality-validated boards, and parts are all components of RapidProto's smooth ...
Read More

Saki Develops Advanced Component Detection Algorithm

Fremont, CA — Saki Corporation has added a new extra component detection (ECD) feature to its range of AOI systems. The new algorithm inspects for stray components, solder balls and foreign materials across the entire surface of the circuit board. It can detect objects less than 200 µm in size ...
Read More

TRI Partners with Key Automotive Manufacturers

San Jose, CA — Test Research, Inc. (TRI) is expanding its role in the automotive electronics industry after establishing partnerships with key automotive industry manufacturers.
Read More

Ventec: High-Tg Thin-Core and Pre-Preg Material

Amesbury, MA — Ventec International is adding to its lineup of thermally conductive laminates and pre-pregs with the launch of the VT-5A2, a next-generation, high-Tg thin-core and pre-preg material.
Read More

Viscom Advances Data Exchange with Open Interface 4.0

Duluth, GA — Viscom's inspection systems have long provided large amounts of information for evaluation, which can be used by other Viscom systems. The company has taken this a step farther, and is now able to integrate machines from other manufacturers into its information processes.
Read More

Wilbrecht Intros Long-Body LED Indicators

St. Paul, MN — Wilbrecht LEDCO, a Microprecision Electronics company, has introduced a range of long-body, nickel-plated, panel mount LEDs. The component housing is designed to easily fit panel thicknesses of up to 9 mm (0.4 in.), even with the additional gasket.
Read More

Yelo Offers 100G Burn-In Solutions

Carrickfergus, Northern Ireland — Yelo offers a range of burn-in solutions for the optical devices in the 100G data center market. The company believes strongly in the importance of test and burn-in during the manufacturing chain.
Read More

Zero Defects Adds to Flying Probe Test Services

Santa Clara, CA — Zero Defects International (ZDI) has added to its range of test capabilities with three additional PCB assembly services. Using Seica flying probe test systems, the company now offers test program generation, reverse engineering and failure analysis.
Read More

ABB Launches Cloud-Based Energy Management System

Houston, TX — ABB has launched a cloud-based energy management system, ABB Ability, which brings remote supervision and diagnostics to the U.S. market. The system connects a facility's electrical equipment to the Internet of Things (IoT) and uses the company's circuit breakers' built-in sensing ...
Read More

ATEC Offers EM Test ESD Simulator

San Diego, CA — Advanced Test Equipment Rentals (ATEC) has upgraded its ESD equipment lineup by offering the ESD NX30 electrostatic discharge simulator from EM Test. The company is offering the NX30 for both short- and long-term rentals.
Read More

Aven Intros E-Arm Focus Mount with LEDs

Ann Arbor, MI — Aven has introduced its E-Arm focus mount with an integrated LED ring light and independent brightness controller. Designed for ease of use during inspection, the eco-friendly 60-LED ring light provides shadow-free illumination, and the variable light control adds flexibility. ...
Read More

Cicoil Intros Flexible Flat Power Cables

Valencia, CA — For power cord applications that require resistance to kinking, fatigue and fraying, Cicoil has developed a line of mechanically-tough and flexible cables. The Hi-Flex series cables are easy to handle and do not require bulky insulating materials and fillers, resulting in a more lightweight ...
Read More

Cirexx Installs Direct Imaging System from Technica

Santa Clara, CA — Cirexx International has purchased a second direct imaging (DI) unit from Technica USA. The equipment is the latest technology offered by Technica's supply partner, Chime Ball Technology (CBT). CBT has developed the production-proven LED technology to include multiple wavelength ...
Read More
 
 
search login