Save. Share. Connect.
Sunday, October 22, 2017
VOLUME - NUMBER
Electronic Mfg. Products
Electronic Assembly Offers Compact OLED Displays
Gilching, Germany — Electronic Assembly has introduced a range of compact OLED display screens. The monochromatic displays now come in a variety of different sizes, profiles, resolutions and colors to suit various uses. Applications include wearables, pocket instruments and other devices that require ...
EMS Intros Dry-Film Negative Photoresist
Delaware, OH — Engineered Material Systems (EMS) has introduced its DF-3590 dry-film negative photoresist for use in microelectromechanical systems (MEMS), wafer-level packaging and CMOS applications (TSV sealing). This material formulation has been optimized for hot-roll lamination and processing on MEMS and ...
EPLAN Preplanning 2.7 Adds Piping Module
Schaumburg, IL — EPLAN has added a piping module to the 2.7 release of Preplanning, adding a powerful tool for accelerating the initial phase of engineering machines, production lines and entire plants. Using EPLAN Preplanning, the acquisition and definition of project information and planning helps to structure ...
EpoxySet Offers UL-Approved Potting Compound
Lincoln, RI — EpoxySet is now offering its EP-207, a thermally conductive epoxy potting and encapsulating compound for electronics and heat dissipating devices. This room-temperature curing system is UL94 V-0 yellow card listed with excellent electrical insulating properties and high dielectric strength ...
Fancort Intros Versatile Robotic System
West Caldwell, NJ — Fancort has introduced its Dobot M1, a professional SCARA-based robot designed for light, high-volume industrial manufacturing. With its extremely versatile interchangeable tool heads, the Dobot M1 is not only usable as an arm, but as a 3D printer, laser engraver, gripper, and ...
Fujipoly Develops Low Thermal Resistance TIM
Carteret, NJ — Sarcon
PG25A is one of Fujipoly's softest and best-performing TIM (thermal interface material). This gap filler pad is designed for applications that have delicate components and high compression rates.
German RepRap Creates Liquid PU Material
Coral Gables, FL — German RepRap, in collaboration with ebalta Kunststoff, has developed a new polyurethane (PU) material that can be used for additive manufacturing. According to the companies, for the first time ever, the material can be processed by a 3D printer in its liquid state, thus eliminating ...
Mill-Max Adds New Spring-Loaded Connectors
Oyster Bay, NY — Mill-Max is expanding its spring-loaded solder cup connector series with new versions that deliver over 60 percent more stroke than the existing series. The single-row 824-22-0XX-00-005000 and double-row 826-22-0XX-00-005000 provide a mid-stroke of 0.045 in. (1.14 mm) and a maximum ...
Nordson DIMA Rolls Out New Website
Deurne, The Netherlands — Nordson DIMA has launched a new website, www.nordsondima.com. The newly-designed site makes it easier for visitors to learn about the company's full line of hot bar reflow soldering, heat seal bonding, ACF laminating, and heat staking solutions. A second website, www.dimadispensing ...
PPI-Time Zero Opens New England Facility
Norwood, MA — PPI-Time Zero recently completed a state-of-the-art facility in Norwood, Massachusetts, and celebrated its grand opening earlier this year. The ribbon cutting ceremony was attended by representatives from the Neponset Valley Chamber of Commerce, state and local officials, regional customers ...
Rogers Offers New Substrate Materials and Plating
Rogers, CT — Rogers Corporation's Power Electronics Solutions (PES) group is now offering its curamik
ADVANTAGE family of features and process enhancements for curamik ceramic circuit substrate materials.
Schleuniger Launches Laser Wire Stripper
Manchester, NH — Schleuniger is now offering its powerful, slim, benchtop Mercury-4 laser wire stripping machine. The machine can process wires and shielded cables in sizes from 0.025 to 6 mm (0.001 to 0.2 in.) O.D.
Ventec Certified to IPC-4101 Revision E
Amesbury, MA — Following an internal review process, Ventec materials now meet all the requirements of the new IPC-4101 Revision E standard (Specification for Base Materials for Rigid and Multilayer Printed Boards). Back in 2014, Ventec International Group declared its support for the proposal led by ESA, the ...
Verotec Adds Two New 3U Card Cages
Manchester, NH — Verotec has added two additional 3U card cages to its portfolio. Conforming to DIN EN 50155:2008 Cat 12.2.11, the KM6 II RAIL units are designed for use on rail rolling stock and other applications that require a strong, EMC-screened card cage. They have been third-party tested by ...
XJTAG DFT Assistant Enhances Zuken CR-8000
Cambridge, UK — XJTAG
have partnered to enhance Zuken's CR-8000 Design Gateway with design for test (DFT) capability. The new DFT abilities will improve test coverage during schematic entry. XJTAG's DFT Assistant will be available later this year as a free plugin for Zuken CR-8000 ...
Akrometrix Intros Tabletop Warpage Metrology System
Atlanta, GA — Akrometrix has launched its latest warpage metrology system, the TTSM (tabletop shadow moiré). The TTSM is a fast, accurate, room-temperature warpage metrology system that is small enough for tabletop operation, but retains the ability to use all of the company's software features ...
Alpha Intros High-Temperature Dipping Alloys
Somerset, NJ — Alpha Assembly Solutions has introduced its latest high-temperature dipping alloys for lead-tinning applications. ALPHA
0307-FT and SnCu3-FT make up the family of products, which are suitable for dipping and lead-tinning processes with temperatures greater than 350°C ...
Ascentech Named Distributor for Inspectis
Chester, CT — Ascentech has been named the North American distributor for Inspectis, a line of advanced optical inspection solutions for PCB assembly. Inspectis offers plug-and-play HD camera microscopes that are designed for non-contact optical inspection, quality control, repair, and rework. The ...
ASM Upgrades A&A's Stencil Printing
Suwanee, GA — Long-time ASM Assembly Systems customer, A&A Electronics Assembly, recently expanded its use of ASM's products to support high-volume printing of PCBs with miniaturized 0201 devices. The Arizona-based EMS company added ASM's VectorGuard
high-tension system to its stencil portfolio ...
Aven Intros Accu-Cut Hard Wire Cutters
Ann Arbor, MI — Aven has introduced its Accu-Cut hard wire cutters, designed with superior cutting strength for tough materials, such as stents, catheters and nitinol. Made from steel alloy with brazed carbide inserts, each pair cuts through hard wires with a hardness rating of 80-82 HRC.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM