Thursday, June 21, 2018
VOLUME - NUMBER
Advertisements
Home/Current Issue >  Electronic Mfg. Products > 

ACL Releases Premium Penetrating Lubricant

Chicago, IL — ACL has added a universal lubricant and degreaser to its benchtop aerosol line. The new lubricant is designed for applications that require the loosening of frozen moving parts, such as hinges, joints, and solenoids.
Read More

Ash Technologies Intros 2D Measurement App

Naas, Ireland — Ash Technologies has introduced a new 2D automatic measurement solution. The app, which is installed on the company's Omni Core digital microscope system, allows users to rapidly analyze samples that require accurate and repeatable measurements.
Read More

Aven Intros Digital Microscope with Macro Zoom Lens

Ann Arbor, MI — Aven's Cyclops macro digital microscope has been engineered to combine ease of use with crystal-clear optics. The digital microscopes are designed so operators may remain in a comfortable position without the need to repeatedly look through microscope eyepieces.
Read More

CONTA-CLIP Creates Flange Plate for Cable Management

Somerset, NJ — With the KDS-FP flange plate, CONTA-CLIP takes the tool-free click-and-push concept of its cable KDSClick entry system to a larger scale for control cabinet construction.
Read More

Creative Materials Launches Conductive Ink

Ayer, MA — Creative Materials has introduced its 127-50, a new electrically conductive/resistive hydro-active ink and coating. The conductivity of the material is variable, depending on the humidity in the environment. Its conductivity increases as the humidity increases.
Read More

DfR Solutions and Electrolube to Study Coating Defects

Beltsville, MD — DfR and Electrolube have planned to participate in a joint research study to examine the cracking defects of conformal coatings. A significant number of electronic designs, driven by the explosive growth of automotive electronics and the Internet of Things (IoT), are incorporating conformal ...
Read More

Epoxies, Etc. Intros Thermally Conductive Epoxy

Cranston, RI — Epoxies, Etc. has developed a new fast-curing, aluminum-filled epoxy adhesive, 70-3814. This thermally conductive adhesive exhibits 1,000 psi of strength after only four hours. After 24 hours, its lap shear strength is 2,900 psi.
Read More

EpoxySet: Optically Clear, Yellow-Resistant Epoxy

Woonsocket, RI — EpoxySet is now offering its EB-135LP, a water-white epoxy formulated to resist yellowing. This high-strength, structural adhesive can be used for encapsulating and sealing LEDs.
Read More

Fujipoly Develops Low-Cost Connector for LCDs

Carteret, NJ — When placed between a printed circuit board and an LCD display, the Carbon Zebra® Connector from Fujipoly® makes reliable electrical contact using 140 conductive pads per inch. The connector offers a current carrying capacity of 50 mA per 0.04 x 0.04 in. (1 x 1 mm) pad and can ...
Read More

Gore Offers Military-Grade Cables and Materials

Newark, DE — W. L. Gore & Associates is now offering cables, materials and fabrics that are developed specially for military use. For more than 30 years, the company has provided advanced technical solutions to meet the U.S. military's complex global challenges, helping to ensure operational readiness ...
Read More

Industrial Dot Peen Marker from Kwik Mark

McHenry, IL — Kwik Mark is now offering its KM-1207 dot peen marker with a 12 x 7 in. (30.5 x 17.8 cm) marking area. The machine is suitable for most industrial marking applications and can engrave on materials ranging from hardened tool steels to delicate plastics.
Read More

JM Performance Products: High-Torque Retention Knob

Fairport, OH — A new high-torque retention knob from JM Performance Products can boost the productivity of machining operations. The retention knob is designed to reach deeper into the threaded bore of the toolholder. As a result, all thread engagement occurs in a region of the toolholder where there ...
Read More

Low-Cost Nibbler for Singulating Boards from FKN

Millis, MA — Singulating tab-routed PCBs in low- to medium-volume production quantities is safe and easy with the N100 nibbler from FKN Systek. Blades are available in standard thicknesses of 0.12, 0.093 and 0.062 in. (3, 2.4 and 1.6 mm). Custom sizes to match the width of the routed section can ...
Read More

Retlif Expands EMC/EMI and Environmental Testing

Ronkonkoma, NY — For 40 years, Retlif Testing Laboratories has offered global strategic compliance and testing services. The company has also recently launched expanded ballast wastewater testing to reduce the risks associated with the spread of aquatic invasive species in U.S. coastal waters, lakes ...
Read More

Rush PCB Manufactures 10-Layer HDI Boards

San Jose, CA — Rush PCB is now offering design and manufacturing capabilities for multilayer, high-density interconnect (HDI) PCBs of 10 layers or more. To achieve very high density interconnection, designers at Rush PCB use every layer interconnect (ELIC) technology.
Read More

Seika Builds New Drying Units into All McDry Cabinets

Hayward, CA — Seika Machinery is incorporating new optimized drying units into all McDry cabinets. The company plans to have all models be able to maintain one percent RH levels, like the McDry DXU-1001A UL quick dehumidifying model.
Read More

Shimadzu Releases Precision Refractometer

Columbia, MD — Shimadzu Corporation has introduced its KPR-300 Kalnew, a high-accuracy, multi-wavelength, digital refractometer, which uses the V-block method to measure optical materials.
Read More

Sonobond Offers Dual-Head Ultrasonic Spot Welder

West Chester, PA — Automotive component manufacturers now have a reliable, environmentally friendly and cost-effective solution for assembling high-voltage terminals used for energy storage in electric and hybrid vehicles. Sonobond Ultrasonics' dual-head spot welder, equipped with special tooling ...
Read More

Tech-Etch Creates Flexible Circuit Design Guide

Plymouth, MA — Tech-Etch has developed a flexible printed circuit design guide that contains technical drawings of circuits, photos that illustrate the company's manufacturing capabilities and design tolerance guidelines. The guide can be found at www.tech-etch.com/flex.
Read More

Technic Launches Electrolytic Copper Plating Process

Cranston, RI — Technic has commercially launched its Elevate® Cu 6370, a versatile electrolytic copper plating process for advanced semiconductor packaging applications.
Read More
 
 
search login