Thursday, September 21, 2017
VOLUME - NUMBER
Advertisements
Home/Current Issue >  Electronic Mfg. Products > 

AEMC Intros Indoor/Outdoor Voltage Testers

Foxborough, MA — Compliant with IEC 61243-3 Edition 2, AEMC's new C.A 771 and C.A 773 VAT voltage testers can be used to work on any 1,000V CAT IV installation. They are rated IP65 and meet Koppen-Geiger type-S extended climatic class requirements for indoor and outdoor use, including extreme conditions ...
Read More

AES Replaces Legacy GSM-5 Gas Safety Monitor

Malvern, PA — Applied Energy Systems (AES) has introduced the GigaGuard GSM-V controller to replace its GSM-5 gas safety monitor. The GSM-5 is a legacy technology from the company's SEMI-GAS® line of ultra-high-purity gas delivery systems.
Read More

AIC Creates Online Product Configurator Tutorial

West Warwick, RI — Advanced Interconnections Corporation (AIC) has created a new video that shows how to quickly build an application-specific connector part number with its Build-A-Part tool.
Read More

CAMI Intros CableEye USB Type-C Test Fixture

Acton, MA — CAMI Research has released a USB Type-C test interface board for its CableEye® cable and harness testing systems. Populated with two USB-C female connectors, the daughter board allows users to continuity-check USB Type-C terminated cables using the CableEye tester while seeing the connectors ...
Read More

COT Expands Fuji NXT Nozzle Series

Gainesville, GA — Count On Tools (COT) has expanded its Fuji NXT nozzle series for the new H24 mounter head. The high-speed head from Fuji is designed to improve productivity over previous models. The company's standard nozzles complement this mounter to provide increased reliability and performance ...
Read More

Electronic Assembly Offers Compact OLED Displays

Gilching, Germany — Electronic Assembly has introduced a range of compact OLED display screens. The monochromatic displays now come in a variety of different sizes, profiles, resolutions and colors to suit various uses. Applications include wearables, pocket instruments and other devices that require ...
Read More

EMS Intros Dry-Film Negative Photoresist

Delaware, OH — Engineered Material Systems (EMS) has introduced its DF-3590 dry-film negative photoresist for use in microelectromechanical systems (MEMS), wafer-level packaging and CMOS applications (TSV sealing). This material formulation has been optimized for hot-roll lamination and processing on MEMS and ...
Read More

EPLAN Preplanning 2.7 Adds Piping Module

Schaumburg, IL — EPLAN has added a piping module to the 2.7 release of Preplanning, adding a powerful tool for accelerating the initial phase of engineering machines, production lines and entire plants. Using EPLAN Preplanning, the acquisition and definition of project information and planning helps to structure ...
Read More

EpoxySet Offers UL-Approved Potting Compound

Lincoln, RI — EpoxySet is now offering its EP-207, a thermally conductive epoxy potting and encapsulating compound for electronics and heat dissipating devices. This room-temperature curing system is UL94 V-0 yellow card listed with excellent electrical insulating properties and high dielectric strength ...
Read More

Fancort Intros Versatile Robotic System

West Caldwell, NJ — Fancort has introduced its Dobot M1, a professional SCARA-based robot designed for light, high-volume industrial manufacturing. With its extremely versatile interchangeable tool heads, the Dobot M1 is not only usable as an arm, but as a 3D printer, laser engraver, gripper, and ...
Read More

Fujipoly Develops Low Thermal Resistance TIM

Carteret, NJ — Sarcon® PG25A is one of Fujipoly's softest and best-performing TIM (thermal interface material). This gap filler pad is designed for applications that have delicate components and high compression rates.
Read More

German RepRap Creates Liquid PU Material

Coral Gables, FL — German RepRap, in collaboration with ebalta Kunststoff, has developed a new polyurethane (PU) material that can be used for additive manufacturing. According to the companies, for the first time ever, the material can be processed by a 3D printer in its liquid state, thus eliminating ...
Read More

Mill-Max Adds New Spring-Loaded Connectors

Oyster Bay, NY — Mill-Max is expanding its spring-loaded solder cup connector series with new versions that deliver over 60 percent more stroke than the existing series. The single-row 824-22-0XX-00-005000 and double-row 826-22-0XX-00-005000 provide a mid-stroke of 0.045 in. (1.14 mm) and a maximum ...
Read More

Nordson DIMA Rolls Out New Website

Deurne, The Netherlands — Nordson DIMA has launched a new website, www.nordsondima.com. The newly-designed site makes it easier for visitors to learn about the company's full line of hot bar reflow soldering, heat seal bonding, ACF laminating, and heat staking solutions. A second website, www.dimadispensing ...
Read More

PPI-Time Zero Opens New England Facility

Norwood, MA — PPI-Time Zero recently completed a state-of-the-art facility in Norwood, Massachusetts, and celebrated its grand opening earlier this year. The ribbon cutting ceremony was attended by representatives from the Neponset Valley Chamber of Commerce, state and local officials, regional customers ...
Read More

Rogers Offers New Substrate Materials and Plating

Rogers, CT — Rogers Corporation's Power Electronics Solutions (PES) group is now offering its curamik® ADVANTAGE family of features and process enhancements for curamik ceramic circuit substrate materials.
Read More

Schleuniger Launches Laser Wire Stripper

Manchester, NH — Schleuniger is now offering its powerful, slim, benchtop Mercury-4 laser wire stripping machine. The machine can process wires and shielded cables in sizes from 0.025 to 6 mm (0.001 to 0.2 in.) O.D.
Read More

Ventec Certified to IPC-4101 Revision E

Amesbury, MA — Following an internal review process, Ventec materials now meet all the requirements of the new IPC-4101 Revision E standard (Specification for Base Materials for Rigid and Multilayer Printed Boards). Back in 2014, Ventec International Group declared its support for the proposal led by ESA, the ...
Read More

Verotec Adds Two New 3U Card Cages

Manchester, NH — Verotec has added two additional 3U card cages to its portfolio. Conforming to DIN EN 50155:2008 Cat 12.2.11, the KM6 II RAIL units are designed for use on rail rolling stock and other applications that require a strong, EMC-screened card cage. They have been third-party tested by ...
Read More

XJTAG DFT Assistant Enhances Zuken CR-8000

Cambridge, UK — XJTAG® and Zuken® have partnered to enhance Zuken's CR-8000 Design Gateway with design for test (DFT) capability. The new DFT abilities will improve test coverage during schematic entry. XJTAG's DFT Assistant will be available later this year as a free plugin for Zuken CR-8000 ...
Read More
 
 
search login