HOME Daily News Archive Tech Horizons Management Electronic Mfg. Services Electronic Mfg. Products Production Partnering Industry Articles Product Previews New Products Hi-Tech Events Trade Shows

U.S. Tech Part Search Powered by Terms Of Use

HOME> Electronic Mfg. Services>

Folder    Article    Weblink    Product    Forum Topic    Calendar    Form    Document    Album

1 2 3 JTAG Technologies Delivers Pro Test Analysis Publication Date: 12/7/2007 Baltimore MD — JTAG Technologies is introducing ProDFT service, an exceptional combination of professional testability analysis and high-value deliverables. ProDFT is backed by the industry's foremost staff of boundary-scan application engineers with over 100 years of combined boundary-scan experience... Laird Deploys Advanced 3D Simulation Tool Publication Date: 8/20/2008 St. Louis, MO — Laird Technologies, Inc. has deployed an advanced 3D simulation tool — Ansoft's HFSS™ Distributed Solve (DSO) design tool — that aids in the design of electronic devices. The company is currently using the tool in rigorous 3D simulations for the design of complex mobile devices and ... Landrex AOI System Goes to New England EMS Provider Publication Date: 8/21/2007 Santa Clara, CA — Landrex Technologies, Inc. has recently placed one of its Optima II 7301 Express AOI systems with Intelligent Manufacturing Solutions (IMS), Inc., an EMS provider located in Manchester, New Hampshire. LCR Electronics: Best of Both Worlds Publication Date: 8/21/2007 By Anand Awasthi, Sales Engineer, LCR Electronics, Inc., Norristown, PA LCR Electronics, Inc., specializes in the design, development and manufacture of standard and custom EMI filter solutions, electronic and motor controls, electromechanical assemblies, custom PC board assemblies and wire harnesses. Lightspeed EMS Adds Capabilities, Services Publication Date: 12/7/2007 Methuen, MA — Lightspeed Manufacturing, a growing EMS provider and BGA technology specialist has added new capabilities and services to meet the needs of its growing list of clients. In addition to expanding the range and scope of BGA services — including rework and reballing — the company ... Making the Workstation Switch at Redcom Publication Date: 5/30/2008 By Dan Schoen, Product Manager, Lista International Corporation, Holliston, MA Redcom Laboratories designs and manufactures what it calls "Reality Based Telecom Switching Systems." Since 1978, this Victor, New York-based company has addressed real-world customer communications needs with high quality, reliable switching equipment — from patented digital switching ... Maximizing Productivity of Automatic Termination Machines Publication Date: 12/7/2007 Rob Boyd, Crimping Product Manager, Schleuniger, Inc., Manchester, NH In the past, it was typical to see production batch sizes for automatic termination machines between 1000 and 5000 pieces or more. Most companies would simply make a large batch of parts and stock the parts... MEC: Handling Production on Every Level Publication Date: 9/21/2007 By Michael Stoehr, President, MEC Midwest, Milwaukee, WI Screaming Circuits may sound like a PC board in great pain, but it's actually the name of division of MEC Companies, a multi-faceted EMS provider based in Milwaukee, Wisconsin. The Screaming Circuits catches the eye when first opening up the company website; it's a division that specializes ... Muhlbauer: RFID Inlay Production of 20000 UPH Publication Date: 8/20/2008 Roding, Germany — Muhlbauer Technology Group has launched what it calls the world's fastest and highly flexible RFID inlay production line, the TAL 20000. Compared to the fastest equipment up to date — the TAL 10000 — the new TAL 20000 provides a quantum leap in flip-chip assembly technology for RFID ... Nestronics: Highly Focused EMS Publication Date: 9/23/2008 By Mark Walsh Director, Business Development, Nestronics, Inc., Andover, MA Established in Singapore in 1979, Nestronics offers high-end, integrated electronics manufacturing services (EMS) and solutions for original equipment manufacturers. The company has built up...   Outsourcing to Repair Depot Saves Money, Improves Product Quality Publication Date: 6/13/2007 By Joe Hajduk, CEO, dB Control, Fremont, CA Outsourcing is old hat to most OEMs; the electronic manufacturing services industry is huge, especially in low-wage areas and in highly automated U.S. plants. But what about service and repair? This is labor-intensive, but it's often not feasible to send product back to China or Me ... Owens Design Sources Solar Cell Manufacturers Publication Date: 12/7/2007 Fremont, CA — Owens Design Inc. has expanded its design and manufacturing capabilities to support the growing production equipment needs of the solar industry. Best known for its expertise in contract design and manufacturing of complex semiconductor capital equipment, Owens Design has expanded upon that expertise ... PartnerTech bolsters UK fast-turn product introduction build capability with Metris X-Tek X-ray system Publication Date: 8/20/2008 By Jos Jans, Executive VP Marketing, Metris PartnerTech, one of Europe's leading contract manufacturing companies, selected an X-Tek X-ray inspection system to test high-complexity boards featuring BGAs and CSPs. The company installed the inspection system at its 2,700m2 (29,063ft.2 UK manufacturing facility at ... PC Boards: Fast-Track R&D Needed Publication Date: 5/11/2007 By Robert Tarzwell, Director of Technology, Sierra Proto Express, Sunnyvale, CA This year, we may be seeing the possible end of printed circuit boards as we have known for so long — if not the end, at least a major evolutionary change. Petroferm Expands Applications Laboratory Publication Date: 9/23/2008 Gurnee, IL — Petroferm Inc. has added several aqueous and semi-aqueous cleaning systems, expanding its testing capabilities at its Gurnee, Illinois facility. The most recent addition is a new state-of-the-art, in-line aqueous cleaning system made by Austin American Technology. This new addition will help further ... QPL: Filling Critical Niches Publication Date: 10/29/2008 By Paul Forker, Vice President Sales, QPL, Hillsboro, OR Finding support for low volume, complex projects is a key challenge for many OEMs. QPL (Quality Production Ltd.) meets these complex and unique customer requirements every day... Quickparts Offering Next-Day Laser Sintered Protos Publication Date: 8/21/2007 Atlanta, GA — Quickparts® has started up Next-Day Manufacturing Service for SLS Rapid Prototypes. Quickparts customers can now place online orders for next-day manufacturing of SLS rapid prototypes until 4p.m. Eastern Time. Quickparts Offers Next-Day Laser Sintering Publication Date: 9/21/2007 Atlanta, GA — Quickparts® has launched its Next-Day Manufacturing Service for SLS Rapid Prototypes. The company's customers can now place online orders for next-day manufacturing of SLS rapid prototypes until 4p.m. Eastern time. RAD Technologies: Providing Tier 1 for Mid-Size OEMs Publication Date: 9/21/2007 By Chuck Mann, CEO, RAD Technologies, Sun Valley, CA Small to mid-sized OEMs and smaller divisions of large OEMs have difficulty finding contract manufacturers who meet their complex production needs with competitive entry level cost. Tier one contract manufacturers typically accept customers that provide volume in excess of $20 million ... Screaming Circuits: Setting the Pace for Fast Turns Publication Date: 7/11/2008 By Duane Benson, Marketing Manager, Screaming Circuits, Canby, OR Today's engineers face a myriad of challenges including shorter product development cycles, shrinking internal resources and increasing competition. Founded by engineers specifically to address the growing gap between original equipment manufacturer (OEM) quick-turn prototyping requirements ...