Save. Share. Connect.
Friday, October 28, 2016
VOLUME - NUMBER
Daily News Archive
Front Page Articles
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Electronic Mfg. Services
Asteelflash Drives Technology for Automated Vehicles
Albert C. Yanez, President, Asteelflash USA
No longer an Orwellian tale of science fiction, automated driving is quickly becoming a reality. Regulators, manufacturers, safety specialists, and others in the industry are recognizing the more prominent role that technology will play in the global automotive supplier market. Multi ...
Hi Tech — the Good the Bad and the Ugly
By Philip Stoten (
On the day the iPhone 7 was launched I found myself flying from Los Angeles to San Jose for meetings and an innovation event at Plug and Play, Silicon Valley's largest startup incubator. I found myself wondering how many of these new technologies actually improve the world we live ...
Jabil: Innovation Acceleration Services Speed New Products to Market
St. Petersburg, FL — Jabil Circuit, Inc., is enhancing the value of its end-to-end manufacturing solutions through the introduction of new innovation acceleration services that compress the entire product lifecycle — from gathering user insights and needs to shortening the path to commercialization. These ...
The Next Big Hurdle in Semiconductor Fabrication
By Frank J. Ardezzone, FJA Industries, Inc.
In the past, wafers were handled with tweezers or vacuum wands. Today, wafers are typically handled by end-effectors which grip the bottom of a wafer using vacuum. An end-effector can be described simply as the robot's hand. The general practice is to use a vacuum clamp to hold the ...
WORLD Electronics and Yamaha: Performance and Service Make the Difference
By Michael L. Martel
For an EMS company, choosing a production equipment supplier comes down to performance and flexibility, equipment reliability, speed of changeovers, and other related factors. But choosing the supplier heavily involves that supplier's reputation for service and support, and the company ...
EPE Corp Partners with Nordson DAGE for Quality Inspection
By Tracey Bell
Privately held and veteran owned, EMS provider EPE Corporation has been in operation since 1965. For more than five decades and through three generations, the company's engineering expertise and dedication to quality and integrity have been its foundation. Based in Manchester, New Hampshire ...
German Engineering in Silicon Valley
By Karl Berger, Vice President Americas, Zollner Electronics
German Engineering in Silicon Valley may sound like a misnomer, but it is alive and thriving in Zollner's EMS facility there. Zollner, a large EMS company, is supporting some of the Valley's brightest innovations from conception to volume manufacturing and fulfillment.
Politics and the Supply Chain
By Philip Stoten (@philipstoten)
I recently took part in a survey on European electronics manufacturing and the first question I was asked was my impression of the likely impact of Brexit, the referendum decision by the U.K. to leave the European Union. This, along with my observations of the U.S. presidential race ...
Precision Motion Control with Piezoelectric Technology
By Birgit Bauer, Scott Jordan, and Stefan Vorndran, Physik Instrumente L.P.
In motion control systems with movement requirements of mere microns, piezoelectric motion control technology is unparalleled in its precision. The piezoelectric effect is found in materials such as quartz, and converts electrical energy into mechanical energy and vice versa. First ...
Reinventing the Spring-Loaded Probe Pin
By Jeff Elliott
For decades the spring-loaded probe, or pogo-style pin has delivered excellent mechanical and electrical performance in a highly-compliant contact. However, this often came at a high cost given that each pin is constructed of 3-4 discrete parts manufactured and assembled in a laborious ...
Samsung Lights Up Global Manufacturing Services' LED Production
By Jeren Holman, Design Technologist, Samsung C&T Automation
Situated in historic West Jefferson, North Carolina, Global Manufacturing Services (GMS) looks to the future when selecting new equipment for LED production. Small, but versatile, the company is going on its 30th year in business. Founded in 1987 by Arlie Keith and his daughter Andria ...
Sonobond: Eco-Friendly Assembly for Alternative Energy Storage
By Janet Devine, President, Sonobond Ultrasonics
Increased demand for affordable and efficient battery storage, as well as for rechargeable batteries, has stimulated manufacturers' interest in reliable, eco-friendly, high-conductivity ultrasonic assembly methods. A growing, worldwide need for batteries for renewable energy is allowing ...
Automation and the EMS Landscape
By Philip Stoten (
Recent figures from the International Federation of Robotics show that the number of multipurpose robots deployed in China in 2014 was well below the world average, and a fraction of the numbers deployed in manufacturing in South Korea, Japan or Germany, who occupied the top three ...
Improving Adhesion of Coatings to PCBs Using Plasma Treatment
By Jeff Elliott
Exposure to water, dust, oil, chemicals, movement, and extreme temperature changes can damage circuitry. This problem is exacerbated for the multi-component printed circuit boards (PCBs) found in outdoor devices that must withstand a wide range of weather conditions for decades with ...
Product-Specific Drying and Curing Systems
By Dr. Hans Bell and Paul Wild, Rehm Thermal Systems GmbH
Horizontal dryers, vertical dryers, infrared dryers, ultraviolet dryers, and nitrogen dryers are just a few of the types of thermal systems used in the electronics industry. Such diversity makes it difficult to create a categorical system which represents the many variants. The generic ...
Redefining Benchtop ATE with Mixed-Signal IO Systems
By Peter van den Eijnden, Managing Director, JTAG Technologies
Many digital electronics designs now contain some form of JTAG/boundary-scan to aid structural board testing or in-system device programming. However, accessing the JTAG feature in a reliable and repeatable manner has always been somewhat neglected by boundary-scan technology and programmable ...
Scalable Automation a Path to Turnkey Success
By Stephen Maund, President and CEO, Demco Automation
The world of custom automation used in electronics and other industries is a game of which direction to proceed — user-operated benchtop stations, or full turnkey systems. By creating a scalable automation strategy from the beginning, equipment reuse, risk reduction, and incremental ...
The Internet of Things Remakes EMS Needs
By Vanessa Gentile, Marketing Manager, Asteelflash Group
The Internet of Things (IoT) is allowing vehicles, devices and even buildings to be embedded with electronics, sensors and network connections that allow inanimate objects to exchange data. The physical world is fast becoming an information system, linked by both hardwired and wireless ...
Are We Ready for Reshoring?
By Neil Adams, Circuit Check, Inc.
The long standing business model of manufacturing, "cheaper labor solves all bottom-line profit challenges," is now being challenged. Today, electronic product manufacturing planted directly in the local region of focus seems to be a more healthy business model. In a report by The Reshoring ...
Case Study: Schleuniger's Equipment Stands the Test of Time
By the Staff of Schleuniger, Inc.
Manufacturing Resource Group (MRG), founded in 1988 is an ISO9001- and ISO13485-certified custom cable assembly and box build company that serves a wide range of industries. With locations in Norwood, Massachusetts, and Tecate, Mexico, MRG has a wire department in each area that is ...
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM