HOME Daily News Archive Tech Horizons Management Electronic Mfg. Services Electronic Mfg. Products Production Partnering Industry Articles Product Previews New Products Hi-Tech Events Trade Shows

U.S. Tech Part Search Powered by Terms Of Use

HOME> Electronic Mfg. Services>

Folder    Article    Weblink    Product    Forum Topic    Calendar    Form    Document    Album    Podcast

1 2 3 4 5 Omron Offers Training Course Schedule Publication Date: 7/7/2010 Schaumburg, IL — Omron Industrial Automation has released the 2010 schedule of training courses for PLC programming and advanced sensor and vision system basics. Courses are held at the company's North American headquarters in Schaumburg, Illinois, near Chicago'S O'Hare airport. Taiwan's Tailyn Leverages Engineering Expertise and Efficiency Publication Date: 8/12/2010 By Jim Chen, Vice President Sales Division, I, Tailyn Communication Company, Ltd., Taoyuan Hsien, Taiwan Taiwan-headquartered Tailyn Communication Company, Ltd. breaks the usual regional contract manufacturing paradigms by focusing on engineering-intensive, higher mix, variable demand projects. Its focus is on providing the lowest total cost for hard-to-source projects. The company does ... Carousels & VLMs Improve Productivity, Reduce Hospital Costs Publication Date: 8/12/2010 By Ed Romaine, VP Marketing, KardexRemstar, Westbrook, ME The need for controlled and efficient distribution of medical and surgical supplies is a critical concern for maintaining quality patient service and profitability in hospital operations. Material handling can account for a large percentage of operating costs and have a direct influence ... Aegis Software Selected by Makso Electronic BV Publication Date: 6/3/2010 Buckinghamshire, UK — Aegis Software's New Product Introduction and shop-floor paperless documentation system has been selected by Makso Electronic BV for its manufacturing site in Veenendaal, The Netherlands. This deployment integrates all of the company's operations from New Product Introduction through documentation ... ASYS Highlights New Technologies at APEX Publication Date: 6/3/2010 Atlanta, GA — This year's IPC APEX trade show was good for just about all exhibitors, and ASYS Group Americas president, Markus Wilkens, was especially pleased with the results. "We had an opportunity to demonstrate many of the new technologies the ASYS Group will be bringing to the market during 2010 as well ... At Sunstone: Making Designs Foolproof & Mistake-Proof Publication Date: 6/3/2010 CORRECTION In our May 2010 edition, we erroneously stated that Mentor Graphics, Analog Devices, Texas Instruments, Linear Tech and National Semiconductor were part of the partnering family with Sunstone Circuits in that company?s Circuit Design ECOsystem. These companies are NOT part of this partnership ... ECD Program Saves Customers 47% Production Time Publication Date: 6/3/2010 Milwaukie, OR — How good is your thermal profiling? Not so hot, according to the results of surveys undertaken at the 2009 APEX show and online, which, confirmed that many otherwise conscientious OEMs and EMS providers fell short on the production verification side of profiling. ECD has addressed this problem ... Epec: Re-Inventing Itself Publication Date: 6/3/2010 New Bedford, MA — Epec has recently expanded its design and manufacturing capabilities, into built-to-print engineered electronic products, resulting in an identity shift and new Web site. Reflecting these changes, it has changed its corporate name from Epec to Epec Engineered Technologies Engineered Technologies. Three years ago, in partnership with several key customers, Epec began investing in broadening its product offering to include  ... How Burton Helps US OEMs Stay Domestic Publication Date: 6/3/2010 By Mark Leman, Operations Manager, Burton Industries, Inc., Hazelhurst, WI Founded in 1978, Burton Industries, Inc. has a long tradition of providing customized manufacturing solutions to OEMs in the medical, industrial, motor control, specialized consumer, security, building controls, defense and professional tool markets. Production is done in a facility ... New KardexRemstar Service Group Covers North America Publication Date: 6/3/2010 Westbrook, ME — The new KardexRemstar Service Organization has more than 500 factory trained, certified technicians available through the company's dealer organization along with eight regional parts and distribution centers throughout North America. There are four service and parts depots throughout ... Rehm Thermal Begins User-Specific Reflow Characterizations Publication Date: 6/3/2010 Roswell, GA — Rehm Thermal Systems will begin offering its customers in the Americas product-specific process characterizations that utilize the company's void-free Condenso Soldering systems. The company's new Applications Center, opened last year in the Atlanta suburb of Roswell, has been designed to provide ... Janco: Customer Focused Manufacturing Partner Publication Date: 5/7/2010 By Michele Knox, Sales Engineer, Janco Electronics, Inc., Rollinsford, NH Janco Electronics Inc., (JEI) a veteran-owned Electronic Contract Manufacturer in Rollinsford, NH, was founded by Lewis Janetos in 1966 and incorporated in 1986. Founder Lewis Janetos still comes to work every day in a suit and tie and takes a huge interest in his employees, current customers ... Winland: Winning with Cutting-Edge Green Publication Date: 4/1/2010 By David A. Kuklinski, Winland Electronics Inc., Mankato, MN Being on the forefront of today's "Green Revolution" is just part of the story — an important part, however — at Minnesota-based EMS provider Winland Electronics, Inc. The company is currently experiencing a transformation — some would say a "rejuvenation". Like many EMS providers ... Modifying Remstar's Shuttle VLM for Varied Access Publication Date: 11/27/2009 Westbrook, ME — The Shuttle® Vertical Lift Module (VLM) from Remstar International Inc., a company of the Kardex AG Remstar International (KRI) Group of Zurich, Switzerland, allows users to maximize their storage capabilities by consolidating multiple departments or work zones into one system using ... Sunstone Intros PCB Fab + Assembly Publication Date: 11/27/2009 Mulino, OR — Sunstone Circuits (Sunstone), the printed circuit board (PCB) solutions provider, now offers 2-in-1 ordering capabilities that enable design engineers to order PCBs from Sunstone Circuits and assembly services from Screaming Circuits, all in one place at www.Sunstone.com. As a result of the company ... Evolving EMS at NBS Publication Date: 11/27/2009 By Richard Heimsch, rich@proteanmarketing.com At first glance NBS appears to be like many other Tier II EMS providers. It was founded in 1999 as a PCB layout specialist, and expanded into contract manufacturing in 2004. In the 10 years since its startup, the company has achieved continuous growth using an unusual business model ... Aster & Itochu in Strategic Partnership. Publication Date: 11/27/2009 Cesson-Sevigne, France — Aster Technologies and Itochu have formed a strategic partnership that enables Itochu to supply its Takaya flying probe tester customers with Aster's TPQR for the test coverage analysis tool. NBS Adds 4th Automated SMT Line Publication Date: 10/28/2009 Santa Clara, CA — EMS provider NBS has installed an additional new SMT line at its headquarters facility in Santa Clara, California. Continued growth in demand for the company's end-to-end solutions fueled the need for what is now the fourth fully automated line in the facility. Electronic Interconnect Offering Medical Electronics PCBs Publication Date: 10/28/2009 Chicago, IL — Electronic Interconnect (EI) is now manufacturing specialized PCBs for medical device electronic assemblies and engineering and design services to help customers plan and develop medical electronic circuit assemblies. According to Pratish Patel, President and CEO, "Medical electronic  assemblies have unique requirements that set them apart from other types of electronic devices, such as consumer electronic products." "Often, thermal management issues must be anticipated in the design, and assemblers must conform to certain quality standards such as ISO 13485. Medical product manufacturers in many instances can benefit from... How Zurvahn's Technology Center Helps OEM Customers Publication Date: 11/25/2009 By John Buckley, Senior VP Sales, Zurvahn LLC, Coconut Creek, FL In today's difficult economic environment, one EMS provider — Zurvahn — has been in the forefront, helping OEMs to successfully ride out NPIs (new product introductions) in the face of drastically downsized or even non...