HOME Daily News Archive Tech Horizons Management Electronic Mfg. Services Electronic Mfg. Products Production Partnering Industry Articles Product Previews New Products Hi-Tech Events Trade Shows

U.S. Tech Part Search Powered by Terms Of Use

HOME> Electronic Mfg. Services>

Folder    Article    Weblink    Product    Forum Topic    Calendar    Form    Document    Album    Podcast

1 2 3 4 100% Yields with Solid Traceability Publication Date: 9/23/2008 By Karin Krell New MP3 players from a global electronics manufacturer like Sony are destined for a demanding consumer market and cannot be compromised in any way. In Malaysia, the company sought a code reading and traceability solution for the PC boards for these products. This kind of product tracking is essential ... Aeroflex to Become Complete LTE Test Solution Supplier Publication Date: 10/23/2009 Stevenage, UK — Aeroflex is now offering LTE (Long Term Evolution) test equipment by bringing to market solutions covering all aspects of LTE test. The company's LTE test solutions range from R&D through to manufacturing across the entire LTE equipment supply chain from chipsets to end-user services including ... ASC Int'l Offers Low Cost In-Line SPI Systems Publication Date: 9/21/2007 Maple Plain, MN — ASC International's pre-owned Solder Paste Inspection (SPI) division, LaserVision Technologies, is a full-service provider of CyberOptics Sentry 2, Sentry 2000 and SE 200 in-line measurement systems. Aster & Itochu in Strategic Partnership. Publication Date: 11/27/2009 Cesson-Sevigne, France — Aster Technologies and Itochu have formed a strategic partnership that enables Itochu to supply its Takaya flying probe tester customers with Aster's TPQR for the test coverage analysis tool. At Adco, Diversity and Quality Rise to the Top Publication Date: 12/7/2007 By Mark Dammen, Adco Circuits, Rochester, MI Being based in Michigan, it's only natural to assume that EMS provider Adco's customers are in the automotive industry, and this is true to some extent. The fact is the company also serves major customers in aerospace, as well as the medical, telecommunications, commercial and industrial sectors ... Badger Technologies: Doing it All Under One Roof Publication Date: 8/21/2007 By Jason E. Saner, Executive VP Sales & Marketing, Badger Technologies, Inc., Farmington, NY If there are problems in the American manufacturing sector, you can't prove it by Badger Technologies. The contract electronics manufacturer's two plants — located about 30 miles apart in the beautiful Finger Lakes region of Western New York State — are consistently booming with ... Balver Zinn German HQ for Cobar Products and Support Publication Date: 7/11/2008 Breda, Holland — The full range of innovative Cobar solder paste, fluxes, other soldering chemicals, and technical support are now available directly through the Balve, Germany installation of its parent company, Josef Jost GmbH & Co.KG (Balver Zinn), in addition to Cobar Europe's existing distribution network ... Belair Ramps Up Printed Silver Products Publication Date: 10/23/2009 Alpharetta, GA — Belair Micro is successfully fabricating printed silver electronic circuits at geometries of <150µm. With products already on the market, hyper design and product development techniques are enabling the company to market new products within weeks of product concept. Building the Best, and Building it in the U.S.A. Publication Date: 1/25/2008 By Mike Martel As the concept of outsourcing electronics manufacturing in Far East manufacturing plants loses its luster, a number of homegrown U.S. manufacturers are developing niches of their own. One of these is The Morey Corporation in Woodridge, Illinois, specializing in the manufacture of hardened ... Circuit Technology Center: BGA Site Changes Publication Date: 10/30/2008 Haverhill, MA — Circuit Technology Center has introduced a circuit board modification service to accommodate changes required at BGA component sites to address design errors or updates that mandate changes to the circuit board layout. This refined and tested procedure provides design engineers with ... Configurable Board Level Shielding from Tech-Etch Publication Date: 10/30/2008 Plymouth, MA — Tech-Etch manufactures standard and custom Board Level Shielding using photo chemical etching which provides design flexibility while reducing cost. The process supports very intricate geometries without the need for expensive tooling. Economical one-piece designs use depth etch bend ... Custom LED PCB Assembly, From Start to Finish Publication Date: 1/25/2008 By Rodney Mena and Johnny Jiang, CAO Group, West Jordan, UT Whether you're evaluating your current CM, or sourcing a specialist PCBA manufacturer, especially one you have not worked with previously, the first thing to check out is certifications. Manufacturers with a commitment to quality should have an ISO 9001:2000 certification and adherence ... Cutting Costs with ISO Certified Production in China Publication Date: 10/31/2007 By Ken Votruba, E-TekNet, Inc., Chandler, AZ A U.S. company that does everything in China, E-TekNet, Inc. prides itself on being a one-stop shop that provides virtually everything. It is a U.S. owned and operated contract manufacturer with corporate headquarters in Chandler, Arizona. Its manufacturing facilities along with its engineering services ... Digitaltest Establishes Contract Testing Services Publication Date: 5/9/2009 Stutensee, Germany — Digitaltest has expanded its training and service center in Grunwettersbach, now offering its new department for contract testing services. In addition to its broad range of MTS-System family solutions for in-circuit and functional test, the company now offers services that include applications ... Diversified Systems Upgrades Production Capabilities Publication Date: 6/2/2009 Indianapolis, IN — EMS provider Diversified Systems, Inc. (dsi) has been quietly focusing on internal advancements during the last 18 months. While other EMS providers have cut off their internal spending, dsi has invested in the long term. Eastek International: Integrated Global Services Publication Date: 7/20/2007 By Bob Wiegand, Vice President, Eastek International, Buffalo Grove, IL For many entrepreneurs, identifying a U.S.-based contract manufacturer that offers a "one-stop shop" solution can help transform an important new product idea into reality. But how to find a CM partner that offers an accommodating yet disciplined process, with sound leadership and support ... ECD: Thermal Quality Management Publication Date: 5/9/2009 Milwaukie, OR — ECD has developed a new Thermal Quality Management Program (ThQM™) to be used by both OEMs and their volume manufacturers, and designed based on the needs of each, and therefore directly addresses the dialogue required between them. Electrolube Expands Testing Capabilities Publication Date: 10/23/2009 Swadlincote, UK — Electrolube has recently invested in new state-of-the-art equipment to boost the technical capabilities of its laboratory. The equipment has been carefully selected and designed to meet the demanding requirements of the electronics industry and has been purchased in line with many international ... Electronic Interconnect Offering Medical Electronics PCBs Publication Date: 10/28/2009 Chicago, IL — Electronic Interconnect (EI) is now manufacturing specialized PCBs for medical device electronic assemblies and engineering and design services to help customers plan and develop medical electronic circuit assemblies. According to Pratish Patel, President and CEO, "Medical electronic  assemblies have unique requirements that set them apart from other types of electronic devices, such as consumer electronic products." "Often, thermal management issues must be anticipated in the design, and assemblers must conform to certain quality standards such as ISO 13485. Medical product manufacturers in many instances can benefit from... EMI: A Multitude of EMS Solutions Publication Date: 10/8/2009 By John Koon, Director of Corporate Communications & Public Relations, Express Manufacturing, Santa Ana, CA Today, Express Manufacturing, Inc. is ranked as the largest privately-held EMS provider in Southern California, but it all started in a humble garage setting, using ping-pong tables as assembly workstations. Founder, President and CEO...