Tuesday, March 20, 2018
Home/Current Issue >  Daily News Archive > 

NEO Tech Releases New LTCC & AlN Design Guidelines

CHATSWORTH, CA - NEO Tech, a leading provider of manufacturing technology and supply chain solutions for brand name OEMs in the industrial, medical and aerospace & defense markets, announces that it recently produced and published new and expanded guidelines for the manufacture of Low-Temperature Co-fired Ceramic (LTCC) and Aluminum Nitride (AlN) packaging solutions. 
Read More

Ersa to Offer Versaflow 3 Maintenance Training Course in April

PLYMOUTH, WI - Kurtz Ersa North America, a leading supplier of electronics production equipment, today announced that it will hold an ERSA Versaflow 3 Selective Soldering Level II Maintenance Training Course from Monday, April 16, 2018 at 1 p.m. to Wednesday, April 18, 2018 at 12 p.m. at its Plymouth office. 
Read More

Koh Young Celebrates 15 years with its Best Performance Ever

SEOUL, SOUTH KOREA - Koh Young Technology, the leading 3D measurement and inspection company, announced its highest-ever quarterly result - up 20 percent year-over-year. Buoyed by strong 3D AOI (Automated Optical Inspection) business coupled with tremendous 3D SPI (Solder Paste Inspection) growth, Koh Young finished 2017 as its most successful year with double-digit annual sales growth. 

Read More

Indium expands beyond Avoid the Void

San Diego, CA - Chris Nash discusses how Indium uses flux chemistries to counter head-in-pillow and produce higher reliability alloys for hi-rel applications. Filmed at APEX 2018. Courtesy of Global SMT & Packaging.  See U.S. Tech's APEX 2018 playlist at https://www.youtube.com/watch?v=45vl58MfBvs&list=PLkbuvG2LatNwKdql_vat1tyHzbaS96FRd

Fab Spending Poised For Remarkable Fourth Year of Growth

MILPITAS, CA - The latest update to the SEMI World Fab Forecast report, published on February 28, 2018, reveals fab equipment spending will increase at 5 percent in 2019 for a remarkable fourth consecutive year of growth as shown in figure 1. 
Read More

TopLine Sponsors IMAPS Wire Bonding Conference

IRVINE, CA - TopLine will once again be the premier sponsor of the upcoming IMAPS Wire Bonding Conference. In making the announcement, TopLine CEO Martin Hart stated that he is delighted to support the conference as the leading sponsor for the second time. 
Read More

YAMAHA “Revs Your Heart”at APEX with Advances in Technology

KENNESAW, GA - The sharp, custom performance motorcycle in the center of the booth led the theme for YAMAHA’s IPC/APEX EXPO 2018 exhibit, “Revs Your Heart”, and there was much to quicken the pulse at the booth this year, judging from the many attendees swarming around the performance assembly technology arrayed around the perimeter of the exhibit. 
Read More

U.S. Tech Publisher's Choice: March 2018

Prior to 2015, no international standard for LED light source measurements existed. The International Commission on Illumination (CIE) remedied this lack of guidance with the publication of its CIE S 025/E:2015 standard, which precisely describes photometric and colorimetric measurements of LED lamps, modules and luminaires. 
Read More

Join Staubli at the 2018 Manufacturing in America

DUNCAN, SC - Join Staubli at the 2018 Manufacturing in America March 14-15 at Ford Field in downtown Detroit to learn more about digitalization is shaping the future of manufacturing. Siemens and Electro-Matic invite you to join over 2600 manufacturing executives, engineers and enthusiasts at Manufacturing in America 2018 inside Ford Field in downtown Detroit. 
Read More

Mike Jones, Vice President at MicroCare Corporation at APEX 2018

San Diego, CA - Mike Jones, Vice President of MicroCare Corporation joins Philip Stoten at APEX 2018 about the recent rapid global growth in their business.

Network, Engage, Learn and Connect at What’s New in Electronics Live - The Ultimate UK Electronics Trade Show

London UK - Whats New in Electronics (WNIE) Live will be held at the NEC in Birmingham from September 25-26th 2018, co-locating with EMC UK, Sensors & Instrumentation, PPMA and TCT Show, and incorporating Embedded Live, to deliver an unrivalled exhibition, conference & technical platform for the UK electronics industry.

Read More

Technic joins distribution partner Galber for Surface Finishing Mexico 2018

Cranston RI – Technic, along with its Mexican distribution partner Galber, will be participating in the upcoming Surface Finishing Mexico Exhibition  (SFM) being held on March 19-21 at the  Querétaro Convention Center in Querétaro, Mexico. Featuring more than 100 companies from 14 countries, SFM 2018 will offer training courses, technical presentations, and networking opportunities for more than 1,500 expected participants.

Read More

ASM visualizes the Smart Factory with Augmented Reality, CFX demo, Workflow solutions

Open communication, collaboration dominate IPC APEX Expo 2018

At APEX 2018, February 27 to March 1 in San Diego, SMT Solutions provider ASM shed a special spotlight on its industry-leading capabilities for Smart Factory implementation. The Hermes Standard and the new IPC Standard CFX were buzzy topics at the ASM booth, underlining the increasing need for standardization in electronics manufacturing to achieve a more integrated, transparent production floor. 
Read More

CONTA-CLIP introduces Universal cable entry system KES for maximum packing density

Pushed, not screwed

Hövelhof, Germany – The new KES series of gland plates from CONTA-CLIP enables the quick and safe introduction of cables and tubes without connectors into cabinets and machine housings. KES plates provide IP66 ingress protection with no need to specially fit and secure cables with screws.

Read More

Flextron Ensures Quality with Advanced 3D SPI, AOI Inspection

 3D SPI Inspection at Flextron

Chicago, IL – Flextron Circuit Assembly, a full-service contract electronics manufacturer, has added 3D Solder Paste Inspection (SPI) capability and Automated Optical Inspection (AOI) to its PCBA manufacturing lines, ensuring high quality and reliability in its finished electronic assemblies. 

Read More

Würth Elektronik iBE picks Digi-Key Electronics distribution channel

Automotive Products via Distribution Partner

Thyrnau, Germany In line with its parent company Würth Elektronik eiSos and their US sister company Wurth Electronics Midcom, now another sister company, Würth Elektronik iBE too offers selected products via the distributor Digi-Key Electronics. Both companies agreed to make standard products - such as SMD rod core chokes, molded SMD power chokes, SMD flat wire power inductors and design kits - available worldwide through Digi-Key Electronics with immediate effect. In addition to these and other high-grade standard products, Würth Elektronik iBE also develops customized solutions for the demanding automotive market.

Read More

TRI to participate on Fuji’s ELF Standard for M2M in SMT Assembly

Taipei, Taiwan - Test Research, Inc. (TRI), a leading test and inspection systems provider for the electronics manufacturing industry, announced its participation in Fuji’s ELF Standard for M2M in SMT Assembly. TRI are firm believers that Industry 4.0 will revolutionize how the SMT Industry operates by being able to interconnect different machines from different vendors providing and optimizing their production lines.

Read More

Alex Malek, Vice President of Sales and Service, North America at Saki America, Inc. at APEX 2018

San Diego, CA - Alex Malek, Vice President of Sales and Service, North America at Saki joins Philip Stoten at APEX 2018 to discuss hisview of the global markets, as well as developments in their inspection solutions.

Seica Presents 2nd ATE Seminar in Herzliya, Israel

Strambino, ItalyAfter the successful first edition, the Seica Seminar again took place in Israel on 20th February 2018. Seica's local representative, Spider Engineering, arranged a perfectly executed event in the beautiful Daniel Hotel in Herzliya with over 130 people attending.

The participants, a real technological elite, represented a large number of defense institutions, government corporations and private companies, once more demonstrating the complexity and the extremely high value of the Israeli market in the electronics environment. 

Read More

Onyx Introduces Rugged Industrial Stack Lights with Unprecedented 3-Year Warranty, Customized for OEMs & Integrators and Shipped in 3 Days

Hastings, MNOnyx Industries’ 151SSLD-RYGN-NNS1 is a 3-segment Stack Light with a rugged metal, industrial grade housing and very bright, long-life LEDs that easily capture the attention of machine operators and plant personnel when events impacting machine performance occur. The 151SSLD-RYGN-NNS1 has 1.5 inch/40mm diameter indicators, standard height lenses, and is ideal for OEM and systems integrator machine builders.

Read More
search login