Monday, March 19, 2018
Home/Current Issue >  Daily News Archive > 

Technic joins distribution partner Galber for Surface Finishing Mexico 2018

Cranston RI – Technic, along with its Mexican distribution partner Galber, will be participating in the upcoming Surface Finishing Mexico Exhibition  (SFM) being held on March 19-21 at the  Querétaro Convention Center in Querétaro, Mexico. Featuring more than 100 companies from 14 countries, SFM 2018 will offer training courses, technical presentations, and networking opportunities for more than 1,500 expected participants.

Read More

ASM visualizes the Smart Factory with Augmented Reality, CFX demo, Workflow solutions

Open communication, collaboration dominate IPC APEX Expo 2018

At APEX 2018, February 27 to March 1 in San Diego, SMT Solutions provider ASM shed a special spotlight on its industry-leading capabilities for Smart Factory implementation. The Hermes Standard and the new IPC Standard CFX were buzzy topics at the ASM booth, underlining the increasing need for standardization in electronics manufacturing to achieve a more integrated, transparent production floor. 
Read More

CONTA-CLIP introduces Universal cable entry system KES for maximum packing density

Pushed, not screwed

Hövelhof, Germany – The new KES series of gland plates from CONTA-CLIP enables the quick and safe introduction of cables and tubes without connectors into cabinets and machine housings. KES plates provide IP66 ingress protection with no need to specially fit and secure cables with screws.

Read More

Flextron Ensures Quality with Advanced 3D SPI, AOI Inspection

 3D SPI Inspection at Flextron

Chicago, IL – Flextron Circuit Assembly, a full-service contract electronics manufacturer, has added 3D Solder Paste Inspection (SPI) capability and Automated Optical Inspection (AOI) to its PCBA manufacturing lines, ensuring high quality and reliability in its finished electronic assemblies. 

Read More

Würth Elektronik iBE picks Digi-Key Electronics distribution channel

Automotive Products via Distribution Partner

Thyrnau, Germany In line with its parent company Würth Elektronik eiSos and their US sister company Wurth Electronics Midcom, now another sister company, Würth Elektronik iBE too offers selected products via the distributor Digi-Key Electronics. Both companies agreed to make standard products - such as SMD rod core chokes, molded SMD power chokes, SMD flat wire power inductors and design kits - available worldwide through Digi-Key Electronics with immediate effect. In addition to these and other high-grade standard products, Würth Elektronik iBE also develops customized solutions for the demanding automotive market.

Read More

TRI to participate on Fuji’s ELF Standard for M2M in SMT Assembly

Taipei, Taiwan - Test Research, Inc. (TRI), a leading test and inspection systems provider for the electronics manufacturing industry, announced its participation in Fuji’s ELF Standard for M2M in SMT Assembly. TRI are firm believers that Industry 4.0 will revolutionize how the SMT Industry operates by being able to interconnect different machines from different vendors providing and optimizing their production lines.

Read More

Alex Malek, Vice President of Sales and Service, North America at Saki America, Inc. at APEX 2018

San Diego, CA - Alex Malek, Vice President of Sales and Service, North America at Saki joins Philip Stoten at APEX 2018 to discuss hisview of the global markets, as well as developments in their inspection solutions.

Seica Presents 2nd ATE Seminar in Herzliya, Israel

Strambino, ItalyAfter the successful first edition, the Seica Seminar again took place in Israel on 20th February 2018. Seica's local representative, Spider Engineering, arranged a perfectly executed event in the beautiful Daniel Hotel in Herzliya with over 130 people attending.

The participants, a real technological elite, represented a large number of defense institutions, government corporations and private companies, once more demonstrating the complexity and the extremely high value of the Israeli market in the electronics environment. 

Read More

Onyx Introduces Rugged Industrial Stack Lights with Unprecedented 3-Year Warranty, Customized for OEMs & Integrators and Shipped in 3 Days

Hastings, MNOnyx Industries’ 151SSLD-RYGN-NNS1 is a 3-segment Stack Light with a rugged metal, industrial grade housing and very bright, long-life LEDs that easily capture the attention of machine operators and plant personnel when events impacting machine performance occur. The 151SSLD-RYGN-NNS1 has 1.5 inch/40mm diameter indicators, standard height lenses, and is ideal for OEM and systems integrator machine builders.

Read More

10nm pattern generation using thermal scanning probe lithography enabled by simplified materials and processes

High resolution metal lines fabricated by lift-off process. 
Zurich, Switzerland - Thermal scanning probe lithography (tSPL) has been used to create patterns with sub-20 nm half pitch resolution. Pattern generation uses a thermally sensitive resist and spin coatable hard mask materials to transfer the resist patterns. Spin coatable materials permit users of tSPL to reduce time and cost of the patterning process.
Read More

Digi-Key Daily: Analog Devices LTC7124 Regulator

Thief River Falls, WI - Analog Devices’ LTC7124 is a dual channel, high efficiency, monolithic step-down regulator providing outputs up to 3.5 A per channel. The device features low quiescent current and integrates low resistance N-Channel MOSFETS to provide up to 95% efficiency. The LTC7124 has wide VIN and VOUT ranges and a programmable switching frequency from 500 kHz to 4 MHz, with external synchronization up to ±25% of the set frequency. The regulator features tight output voltage accuracy, and the outputs can be configured as a 2-phase single output at up to 7 A. The user can also select Burst Mode® operation for high efficiency at light loads or forced continuous mode to minimize output ripple and is ideal for battery-powered systems and point-of-load supplies.

Award Wins Highlight Henkel’s Broad Innovation Portfolio

EMI Shielding and Thermal Interface Materials take Top Honors

Irvine, CA – At last week’s IPC APEX Expo event in San Diego, CA, Henkel’s Adhesive Electronics group continued its winning streak, landing two trophies in Circuits Assembly magazine’s annual NPI Awards contest. The program, which recognizes leading products for electronics assembly introduced during the last year, leverages a judging panel of practicing industry engineers to decide the most impactful technologies as compared to others in specific categories. Each product is evaluated on challenging metrics including creativity and innovation, compatibility with existing technology, cost-effectiveness, design, reliability, flexibility, performance, user-friendliness and throughput capability.

Read More

IPC APEX Expo proves a tremendous success for Koh Young

Chandler, AZ On the heels of installing its 11,000th inspection solution at Dynamic Manufacturing, a Matric Group Company, Koh Young reports that they experienced their best IPC APEX Expo. “With more qualified leads than ever before, the Americas market is embracing the leading technologies and solutions we provide to the industry,” said Juan Arango, Managing Director at Koh Young America. 

Read More

Common mode chokes from TT Electronics are ideal for automotive EPS noise suppression applications

Showcased on TT Electronics Booth 625 at APEC 2018

Woking, UK - TT Electronics, a global provider of engineered electronics for performance critical applications, today launched the HA19 series of common mode chokes for use in electronic power steering (EPS) noise suppression applications.  With high performance and AECQ-200 certification, the HA19 series devices are ‘automotive ready’ for the new generation of motor vehicles. 

Read More

Indium Corporation Expert to Present at TMS 2018 Annual Meeting & Exhibition

Clinton, NY - Indium Corporation’s Jonathan Minter, Research and Development Metallurgy Technician, will present at the TMS 2018 Annual Meeting & Exhibition on March 11-15 in Phoenix, Ariz.

High-Pb solders have been used as die-attach materials for decades in discrete power packages. Due to the known harmful effects of Pb to human health and the environment, and the demand of SiC power device serving under higher junction temperature, alternative Pb-free materials have been studied intensively.

Read More

OTTO Releases New TC Series Keypad Modules

The TC is an up to 5 position keypad switch module.

Carpentersville, IL - OTTO (, an industry leader in the design and manufacturing of control switches, joysticks and grips, announces the TC-3 and TC-4 Keypad Switch Modules.

Read More

New manager for business unit systems of IPTE Germany

 Dr Jörg Handke
Genk, Belgium - Dr Jörg Handke (39) is the new manager of the business unit “systems” of IPTE Germany GmbH (Ltd.), a subsidiary of IPTE Factory Automation, one of the world’s leading suppliers of automated production equipment for the electronics and mechanics industry. Dr Handke holds a PhD in physics and is a certificated project manager.

Read More


EAGAN, MN - Ironwood Electronics recently introduced a new BGA socket addressing high performance requirements for testing BGA devices - SBT-BGA-7051. The contactor is a stamped spring pin with 31 gram actuation force per ball and cycle life of 125,000 insertions. The self inductance of the contactor is 0.88 nH, insertion loss < 1 dB at 15.7 GHz and capacitance 0.097pF. The current capacity of each contactor is 4 amps at 30C temperature rise. Socket temperature range is -55C to +180C. Socket also features a floating guide for precise ball to pin alignment. The specific configuration of the package to be tested in the SBT-BGA-7051 is Low Power DDR4 memory chip (BGA, 10x14.5mm, 0.8mm pitch, 200 position, 12x18 ball array).
Read More

MicroCare Recognizes its Top Performers at APEX

 HISCO wins Distributor Of the Year Award from MicroCare
New Britain, CT - MicroCare Corp. the industry’s leading manufacturer of critical cleaning, coating and lubrication products, has recognized its highest achieving partners at IPC APEX EXPO, in San Diego, CA with the presentation of the ‘MicroCare Distributor of the Year’ and ‘Representative of the Year’ Awards. 
Read More


Taipei, Taiwan -  Test Research, Inc. (TRI), the leading test and inspection system provider for the SMT industry proudly announces that the company’s new generation AOI, TR7700Q, received CIRCUITS ASSEMBLY’s 2018 NPI Award at a ceremony held during the 2018 IPC APEX show in San Diego, CA, USA.

Read More
search login