Wednesday, December 7, 2016
VOLUME -22 NUMBER 6
Publication Date: 06/1/2007
Advertisements
Home/Current Issue >  Daily News Archive > 
Cooperation between Würth Elektronik eiSos and Modelithics: Simulation models for high-frequency inductances
Publication Date: 11/29/2016

WALDENBURG, GERMANY - Würth Elektronik eiSos and Modelithics proudly present the results of their cooperation project: with immediate effect, Microwave Global Models™ products are now available for three product families of SMT high-frequency inductors. HF developers now have the opportunity to test the 0402 and 0603 designs of the WE-MK, WE-KI, and WE-TCI coil families in simulations.
 
Rehm Is Developing a New Curtain Nozzle for Highly Selective Conformal Coating
Publication Date: 11/29/2016

BLAUBEUREN, GERMANY - Circuit board coating is not just about complete reliability. Precise application procedures are required to cope with the constant miniaturisation in the electronics industry and the associated narrower tolerances between the areas to be lacquered and the areas which must remain free of lacquer. Electronics manufacturers are increasingly confronted with an ever-growing range of product and material mixes.
 
Dymax Multi-Cure® 9-20557 Conformal Coating Offers Protection Against Thermal Shock
Publication Date: 11/28/2016

TORRINGTON, CT - Dymax Multi-Cure® 9-20557 is designed for rapid conformal coating of printed circuit boards and other electronic assemblies. This MIL-I-46058C listed product is especially formulated to remain on the edges of difficult-to-wet components and sharp leads, while its low modulus allows it to excel in coating applications where thermal shock performance is critical.

Multi-Cure® 9-20557, which is UL approved and meets the IPC –CC-830 standard, has been optimized for coating thicknesses between 51 mic [0.002 in] and 510 mic [0.020 in].
 
FREE Digital Download of Failures Analysis Booklet from ACI Technologies
Publication Date: 11/28/2016

PHILADELPHIA, PA - ACI Technologies, a manufacturing and scientific research corporation dedicated to the advancement of electronics processes and materials, invites you to download a free copy of its very popular e-booklet, “Failure Analysis Techniques for Electronics” from its Website store, which is located at http://store.aciusa.org/Failure-Analysis-Techniques-for-Electronics-Digital-Download-P181.aspx.

electronica 2016: ScoopTalk Roundtable - The PCB Supply Chain, Opportunities & Challenges
Publication Date: 11/28/2016

Munich, Germany - Kim Sauer (@kimsauermedia) is joined by Dr. Michele Stampanoni, Cicor's VP Strategic Sales & Business Development, Alun Morgan, EIPC Chairman and Mark Goodwin, Ventec's COO EMEA & USA to explore the challenges and opportunities faced by those operating in the PCB supply chain.

A ScoopTalk production filmed on location at Electronica 2016 and sponsored by ASM, KIC, Mentor Graphics and Ventec.
 
electronica 2016: Albert Yanez Sr., Corporate Executive VP, President of Americas at Asteelflash
Publication Date: 11/28/2016

Munich, Germany -  Scoop's Kim Sauer (@kimsauermedia) meets Albert Yanez Sr., Asteelflash's Corporate Executive VP, President of Americas to discuss recent milestones including the new facility in Tunisia. This is the first factory in the region with Fuji TX placement and expected to earn TS certification for Automotive, a certification recently earned at Asteelflash's Tijuana factory in Mexico.

Filmed on location at Electronica 2016 in Munich, Germany thanks to sponsorship from ASM, KIC, Mentor Graphics and Ventec.
 
See our electronica 2016 play list at:
Christian Gück Is the New Head of YXLON Inspection Services and Is Going to Expand the Inspection Service Worldwide
Publication Date: 11/28/2016

HATTINGEN, GERMANY - Christian Gück took over the management of YXLON Inspection Services and will promote the expansion of the inspection services for customers worldwide. Especially dimensional metrology by means of computed tomography poses considerable challenges both to X-ray systems and inspectors. Gück, who had already focused on metrology during his studies, had the opportunity to gain extended experience in the field of conventional measuring methods like tactile or optical technologies as well as CT Metrology during several years with a renowned German company.
 
Everett Charles Technologies to exhibit at BIOMEDevice Show 2016
Publication Date: 11/28/2016

Fontana, CA - Everett Charles Technologies (ECT) will exhibit its leading Contacting and Compliant Connector Solutions at the upcoming BIOMEDevice Show scheduled to take place December 7 - 8, 2016 at the San Jose Exhibition Center, California. 

CyberOptics Showcases Large Particle Sensing Functionality in Next-Generation Airborne Particle Sensors at SEMICON Japan
Publication Date: 11/23/2016

MINNEAPOLIS, MN - CyberOptics® Corporation, a leading global developer and manufacturer of high precision 3D sensing technology solutions, announces it will showcase its next-generation Airborne Particle Sensor technology (APS2) with an extended particle size range at the upcoming SEMICON Japan in Tokyo, December 14-16, 2016 in booth #4605.
Bjorn Dahle, CEO of KIC at Electronica 2016
Publication Date: 11/23/2016

 
Bernhard Muerkens, YXLON International at Electronica 2016
Publication Date: 11/23/2016

 
Teledyne DALSA’s Industry-Leading Large Format CMOS Detectors Featured at RSNA 2016
Publication Date: 11/23/2016

WATERLOO, ONTARIO - Teledyne DALSA, a Teledyne Technologies company and global leader in digital X-Ray image sensing technology, will display its Xineos family of CMOS dynamic flat X-Ray detectors at the RSNA 2016 Technical Exhibition, November 27 to December 2, at McCormick Place in Chicago.
 
Alpha Appoints ER-SA Elektrík as New Distributor Partner for Turkey
Publication Date: 11/23/2016

SOMERSET, NJ - Alpha Assembly Solutions, the world leader in the production of electronic soldering and bonding materials, is pleased to announce the appointment of ER-SA Elektrík as its official Distributor Partner for Turkey.
Microscan Appoints Christoph Wimmer as Director, Customer Experience and Electronics Vertical
Publication Date: 11/21/2016

RENTON, WA - Microscan, a global technology leader in barcode, machine vision, verification, and lighting solutions, is pleased to announce the appointment of Christoph Wimmer to the role of Director, Customer Experience and Electronics Vertical based at Microscan’s global headquarters in Renton, Washington, U.S.A.
Epoxies, Etc.: Optical and Semiconductor Grade Epoxy Resin
Publication Date: 11/21/2016

CRANSTON, RI - Epoxies, Etc. has developed a fast curing thin film Electrically Conductive Adhesive. Room temperature curing Electrically Conductive Adhesives are ideal for bonding and sealing applications that cannot utilize heat to cure the adhesive.
 
Jaguar Partners with MIRTEC to Maintain Demanding Quality Standards
Publication Date: 11/21/2016

OXFORD, CT - MIRTEC, “The Global Leader in Inspection Technology,” is pleased to announce that Jaguar de Mexico, has selected MIRTEC’s award-winning MV-6 OMNI 3D AOI system to maximize production efficiency and maintain demanding quality standards.
Mycronic Makes Strategic Acquisition
Publication Date: 11/21/2016

TAUBY, SWEDEN - Mycronic AB (publ), acquires 100 percent of Automation Engineering, Inc. (AEI) in the USA. The purchase price amounts to USD 35 million (approximately SEK 321 million) on a debt free basis and is financed with Mycronic’s own funds. Under certain conditions, based on parameters such as growth and earnings, an earn-out at a maximum amount of USD 27 million (approximately SEK 248 million) will be paid over two years.
Henkel Wins Best Paper Award at IPC India Conference
Publication Date: 11/18/2016

IRVINE, CA - With shrinking dimensions and increased function, the need for adaptable and effective thermal solutions to ensure electronics reliability is greater than ever before. This indisputable reality was at the fore during Henkel’s paper presentation during the recent IPC India Conference, which took place alongside Electronica/Productronica India 2016.
Simplimatic Designs De-traying Robotic System to Handle Fragile Glass Vials
Publication Date: 11/18/2016

FOREST, VA - Customers across the globe turn to Simplimatic Automation, a leader in material handling and automation equipment, for custom manufacturing solutions designed to simplify even the most challenging production needs.
FKN Systek: N200 Punch For Singulating Tab Routed Panels
Publication Date: 11/18/2016

MILLIS, MA - Available for under $4,000 from FKN Systek, The N200 is a low cost top down air operated punch for singulating tab routed PCB Panels one tab at a time. An upper and lower matching knife blade is used to pinch the tabs apart.
 
 
search login