Tuesday, October 17, 2017
Home/Current Issue >  Daily News Archive > 

Nippon Pulse introduces four-axis FMAX box controller with built-in driver

RADFORD, VA – Nippon Pulse is excited to announce its first box-level controller to join its chip and board controller product lines. The FMAX-4X-2SD is a box controller for up to four axes of movement, with built-in servo drivers for the X and Y axes. The X and Y axes can control rotary and linear brushless motors, such as Nippon Pulse’s Linear Shaft Motor servo; the Z and U axes can control other types of motors by connecting additional drivers.

Read More

Compact 6-Axis Motion Controller for High Precision Positioning Applications in Industry and Research

PI’s new cost-efficient servo motor controller drives 6 and 4 axis motion systems.

Auburn, MA – Precision positioning systems industry leader PI (Physik Instrumente) has released a new 6-axis servo motor controller – the C-884.6DC. Most modern precision motion systems are driven by servo motors, because they provide high torque, fast acceleration, smooth motion with a wide dynamic speed range, and fast start stop performance. 

Read More

Nordson DAGE to Discuss Its Wafer X-ray Metrology Platform at IWLPC

Booth #1

AYLESBURY, UK - Nordson DAGE, a division of Nordson Corporation, announces plans to exhibit at the 14th annual International Wafer-Level Packaging Conference (IWLPC) Expo, scheduled to take place Oct. 24-26, 2017 in San Jose, CA. The Nordson DAGE inspection experts will discuss the XM8000 Wafer X-ray Metrology Platform in Booth #1.
Read More

ASM’s Wide Range of Smart Manufacturing Tools and Solutions Is a Visitor’s Magnet

SUWANEE, GA - An overall positive mood in the Northern American electronics manufacturing industry was reflected by large visitors at SMTA International 2017, September 19-20, in Rosemont, Illinois. Clearly the most prominent topic of interest: smart manufacturing tools and concepts and how to realize them.
Read More

Indium Corporation Features Indium3.2HF Solder Paste for Fine Feature Printing at IWLPC 2017

CLINTON, NY - Indium Corporation will feature its Indium3.2HF Solder Paste at the 14th International Wafer-Level Packaging Conference (IWLPC 2017—Silicon to Systems), Oct. 24-26, in San Jose, Calif.

Indium Corporation’s Indium3.2HF is an air or nitrogen reflow, water-soluble solder paste specifically formulated for fine feature printing applications (Type 6SG). 

Read More

KIC releases new smart technology for real-time insight into reflow and wave solder processes

SAN DIEGO, CA - KIC is pleased to announce the release of its new Vantage network software system. The new software provides a real-time dash-board for thermal processes, accessible anywhere, from any authorized PC or mobile device.
Read More

Viscom presents powerful 3D AOI and SPI with ultra-modern data exchange for Industry 4.0 at SMTA Guadalajara

HANOVER, GERMANY - Viscom is pleased to announce plans to exhibit the 3D AOI system S3088 ultra gold and 3088 basic at SMTA Guadalajara Expo & Tech Forum, scheduled to take place Oct. 18-19, 2017 at Hotel Riu Guadalajara. Viscom will showcase its latest high-performance 3D AOI and SPI systems – S3088 series – along with a number of exciting new 3D imaging features and the new Viscom Open Interface 4.0. 

Read More

Libra Industries Hires Senior PCB Designer

MENTOR, OH - Libra Industries, a privately held electronics manufacturing services (EMS) provider, is pleased to announce that it has hired Alan Vannasy as a Senior PCB Designer. Vannasy is an electronics packaging designer with more than 12 years of experience in the design and development of new mechanical designs and printed circuit board designs, from initial concept to production.
Read More

Specialty Coating Systems Debuts New-Generation Omegameter SMD 650 Ionic Testing System

INDIANAPOLIS, IN - Specialty Coating Systems (SCS) announced today the launch of the Omegameter SMD 650, the next-generation, software-controlled Omegameter ionic contamination test system.

Read More

Alpha to Showcase Latest Products for SMT Assembly at productronica, Munich, Germany

Hall B3, Booth 272

SOMERSET, NJ - Alpha Assembly Solutions, the world leader in the production of electronic soldering and bonding materials, will be exhibiting its latest range of product solutions, alongside its sister company MacDermid Enthone Electronics Solutions, at the productronica exhibition in Munich, Germany from Tuesday 14th – Friday 17th November. 

Read More

Pillarhouse International: Selective Meets The Wave

Productronica 2017, Hall 4 Booth 220

CHELMSFORD, UK - Over recent years there has been a big push to try and remove wave soldering from the through -hole assembly process. This is not always possible. Common wave associated problems such as bridging between pins and skipped joints etc. inevitably require a high reliance for a re-work function with this mode of operation.

Read More

Pickering Interfaces to Introduce New PXI and LXI Switching Solutions at productronica 2017

Booth A1.452

CLACTON-ON-SEA, UK - Pickering Interfaces, a leading provider of signal switching and simulation solutions used in electronic test and verification, will showcase their latest high-density PXI and Ethernet LXI Switching & Simulation at productronica 2017 in Munich, November 14th to 17th, Booth A1.452.

Read More

PACE Delivers 100th PRC 2000 Miniature/Microminiature Repair System to DLA under $1.2 Million Contract

VASS, NC - PACE Worldwide recently delivered the 100th PRC 2000 Miniature/Microminiature Electronic Repair System to Defense Logistics Agency Troop Support, part of a $1.2M contract requiring delivery of 384 total systems.
Read More

Indium Corporation Expert to Present at IWLPC 2017

CLINTON, NY - Indium Corporation’s Dr. Yan Liu, Research Chemist, will present at the 14th International Wafer-Level Packaging Conference (IWLPC 2017—Silicon to Systems), Oct. 24-26, in San Jose, Calif.
Read More

Aven’s Deluxe 2-in-1 Soldering/De-Soldering Station with Premium Features

ANN ARBOR, MI - Aven’s 2-in-1 Soldering/De-Soldering Station features a soldering iron and de-soldering gun in one compact unit. This station is intended for general purpose soldering as well as specialized lead-free soldering applications.
Read More

Cemtrex Named to Crain’s New York Business Fast 50 Companies

FARMINGDALE, NY - Cemtrex Inc., a world-leading industrial and manufacturing company, today announced that the company was recently selected by Crain’s New York Business as one of its “ 50 fastest-growing companies in the New York area ” for 2017.

Read More

Transition Automation Launches Revolutionary PrinTEK AP-3624-V Large-Area Table-top High-Precision Printer

Tyngsborough, MA Transition Automation Inc., known globally as the innovative creator of Permalex® metal squeegee blades and PrinTEK series benchtop SMT printing machines, announces the launch of the revolutionary PrinTEK AP-3624-V advanced benchtop large-area stencil printer.  The new PrinTEK AP-3624-V boasts a 32” x 24”print area (813mm x 610mm), a load-unload-reload repeatability of better than +/- 1mil (0.001”), and can be equipped with a with a Vision option for very high precision setup. The printer itself weighs less than 500lbs. (226Kg) due to the smart use of lightweight composite materials in its design.

Read More

Ascentech to Show New INSPECTIS Optical System and Gen3 Gensonic Cleaner at SMTA Long Island Expo October 18

CHESTER, CT - Ascentech, LLC will exhibit at and participate in the SMTA Long Island Expo & Tech Forum on Wednesday, October 18, 2017 at the Melville Marriott Long Island, 1350 Walt Whitman Road, Melville, New York.

Read More

CBT Announces Improved Print Speeds with new DI Solder Mask

Chime Ball Technology (CBT), Taiwan, announced today that they were able to achieve print speeds between 30-32 second per side on an 18 x 24 panel size using their Phoenix and Raptor DI models and a new DI solder mask from Electra Polymer LTD, England. The combination of the CBT technology and the Electra Polymers EMP110/5840 TG DI solder mask produced the best-known speeds for solder mask in the market. 

Read More

Productronica 2017: ASM Leads the Way to the Smart SMT Factory

Many new solutions and eight integrated workflows

MUNICH, GERMANY - Under the motto “Check-In to the Smart Factory”, technology leader ASM Assembly Systems will present innovative solutions for all areas of modern electronics production at the 2017 Productronica trade show.
Read More
search login