Tuesday, February 20, 2018
Home/Current Issue >  Daily News Archive > 

Expanding Sales Growth sees New Directors Appointed at Europlacer Americas

Mike Foster                Chris Merow 
Tampa, FL - Europlacer Americas announces that it has added Mike Foster to its management team as Director of Business Development. He will be working alongside Chris Merow, who was recently promoted to Director of Sales. These important new directorships constitute a cooperative move to strengthen the company’s sales operations across the Americas in the light of expanding sales growth.
Read More

Nordson YESTECH Installs BX Benchtop AOI System at Fluid Components International

Carlsbad, CA Nordson YESTECH, a subsidiary of Nordson Corporation and a leading supplier of automated optical and conformal coat inspection systems for the electronics industry, is pleased to announce that Fluid Components International (FCI) has purchased and installed a BX Benchtop AOI system. FCI designs and manufactures thermal mass flow meters, flow switches and level switches used worldwide in industrial process measurement and control applications.

Read More

CyberOptics Demonstrates Yield-Improving Wireless Measurement Devices for Semiconductor Tools at SPIE

Booth #314

MINNEAPOLIS, MN - CyberOptics® Corporation, a leading global developer and manufacturer of high precision 3D sensing technology solutions, announces it will demonstrate its ReticleSense® Auto Multi Sensors – the world’s most efficient and effective wireless measurement devices for semiconductor fabs and equipment OEMs at SPIE Advanced Lithography at the San Jose Convention Center, February 27-28th at booth #314. 
Read More

IPTE to exhibit at IPC APEX Expo 2018

Alpharetta, GA - IPTE Factory Automation, one of the world’s leading supplier of automated production equipment for the electronics and mechanics industry, will exhibit with an own booth (number 3917) on the upcoming IPC APEX Expo (February 27 to March 1) in San Diego, USA. IPTE will focus on two main categories during the exhibition: depaneler (PCB) and board handling. Due to that, the products EasyRouter with cobot loading /unloading (off-line low-cost PCB) and MFT 19” (Board Handler for In-Circuitor functional- test as well as programming processes) will be shown.

Read More

Digi-Key Daily: Infineon 600 V CoolMOS MOSFET Family

Thief River Falls, WI - Infineon’s 600 V CoolMOS CFD7 MOSFET family enable more efficient, more reliable, and lower cost resonant topologies in high power SMPS applications such as telecom, servers, and EV charging stations. The superjunction MOSFETs integrate a fast and robust body diode, with up to 69% lower reverse recovery charge than competitors.
Read More

Sunstone Circuits® Attends and Sponsors MakeHarvard

MULINO, OR - Sunstone Circuits®, the leading printed circuit board (PCB) solutions provider for prototypes, medium volume and production quantities, recently attended, sponsored and judged a competition category at MakeHarvard, the first engineering hackathon held at the historic Harvard University. 
Read More

Wisconsin Lt. Governor Rebecca Kleefisch Tours SCS Facility to Promote WI Aerospace Industry

INDIANAPOLIS, IN - Specialty Coating Systems (SCS) is pleased to announce that Wisconsin Lt. Governor Rebecca Kleefisch toured its facility on Tuesday, February 13, 2018, as part of her effort to showcase Wisconsin's aerospace industry. 
Read More

Indium Corporation Features Metal Thermal Interface Materials for Burn-In and Test at BiTS Workshop 2018

CLINTON, NY - Indium Corporation will feature its metal thermal interface materials for burn-in, including Heat-Spring® and HSMF-OS, at Burn-in & Test Strategies Workshop on March 4-7 in Mesa, Ariz. 
Read More

Aegis Software Unveils the Industry’s Most Complete Quality Management System at APEX 2018

Aegis will also be Connecting their FactoryLogix Platform to the World’s First, Standards-Based, Live Show-Floor Demonstration of the IPC CFX Internet of Things Standard

HORSHAM, PA - Aegis Software, a global provider of Manufacturing Execution Software (MES) announces the unveiling of their new quality management capabilities that complement Aegis’ FactoryLogix® existing Incoming & In-Process Quality Assurance capabilities to now deliver Administrative Quality Management capabilities to drive a culture of continuous process and improvement. 
Read More

Radiant Webinar Presents Technology that Replicates Human Vision for Accurate Evaluation of AR/VR Display Quality

REDMOND, WA - Radiant Vision Systems, a leading provider of test and measurement solutions for lighting and displays, announces that it will host a webinar to introduce display measurement technology that evaluates augmented and virtual reality displays under the same conditions as they are viewed by human users. 
Read More

PI Expands Its Family of Digital Piezo Nanopositioning Controllers

Integrating different drive technologies from traditional servo and stepper motors to highly specialized piezo-ceramic scanners is easy.

AUBURN, MA - Industry leader in motion control and nano-positioning solutions PI (Physik Instrumente) L.P. has expanded its successful E-709 family of low-cost digital piezo nanopositioning controllers with a new plug-in module for the C-885 PIMotionMaster modular controller system.  

Read More

Altek Electronics, Inc. Purchases Ersa’s Smartflow Selective Soldering System

PLYMOUTH, WI - Kurtz Ersa North America, a leading supplier of electronics production equipment, announces that Altek Electronics, Inc. has purchased and successfully installed the Smartflow 2020 selective soldering system.
Read More

TopLine Reaches Out to Students at GCSU Career Day March 7

ATLANTA, GA - TopLine will reach out to students for the 10th time at the Georgia College and State University (GCSU) Career Day on March 7, 2018 to support students in the field of Science Technology Engineering and Mathematics (STEM) studies. 
Read More

PDR Offers IPC 7711/7721 Rev. C Courses

SHINGLE SPRINGS, CA - PDR, an industry recognized leader in IR rework since 1986, is pleased to announce that it now offers courses through its PDR Alliance Network for the new IPC 7711/7721 Rev. C standard – The Rework and Repair of Electronic Assemblies – which now includes focused infrared technology as a method for the removal and replacement of components. 
Read More

John Hengst Joins Inovaxe as Regional Sales and Channel Partner Manager

DEERFIELD BEACH, FLInovaxe is pleased to announce that it has hired John Hengst as its new Regional Sales and Channel Partner Manager, located in Chicago, IL.

Hengst joins Inovaxe with many years of experience with Panasonic, Assembleon and Fuji. He will work with the company’s current sales team and representatives, and expand Inovaxe’s sales channel partners.

Read More

Flexible Circuits Inc enjoys benefits of second CBT/MLI DI system purchased from Technica.

San Jose, CA - Technica USA reported that Flexible Circuits installed their second CBT/MLI DI system last year.

Dave Stollsteimer, President of Flexible Circuits stated, “Our first purchase of the CBT/MLI DI system 5 years ago significantly changed our company’s capability, technology and quality.  When we decided last year to broaden our use of DI imaging in our operation, it was a no brainer

Read More

Pillarhouse at IPC APEX 2018

Turning the IPC APEX EXPO show floor into a shop floor!

Elk Grove Village, IL – With only days until the start of the IPC APEX 2018 show, Pillarhouse are very pleased to announce that they will be part of the IPC Connected Factory Exchange (CFX) Showcase. This is a live demonstration that delivers standardized machine IoT data from production line machines, through the cloud, and on to visitor’s mobile phones.

Read More

Shielded Surface Mount RF Inductors with Higher Inductance

Gowanda Expands SML32S “1210” Series - Now Offering Inductance Values to 470 µH

Gowanda, NY - Gowanda Electronics, a designer and manufacturer of precision electronic components for radio frequency and power applications, announces the expansion of its SML32S series of wirewound, shielded, molded RF surface mount inductors in the “1210” style. This expansion increases the number of individual parts in the series by more than 20% and broadens the inductance range by adding values from 120 µH to 470 µH. 

Read More

ISL’s Continuous Source Manufacturing Services Extend End-Products’ Lifecycle

Obsolete/End-of-Life Components Modified or Replicated to Support Existing Designs

SYOSSET, NY - Announced today by ISL Products International Ltd., a global leader in value-added manufacturing and engineering services for electronic/electromechanical components, is CSM (Continuous Source Manufacturing), CSM is a suite of customizable services developed to extend the lifecycle of the broadest range of products, and provide OEMs with an ongoing manufacturing resource for obsolete, EOL (end-of-life) parts. 
Read More

DDM Novastar Announces Newest Member of the Team

John Malboeuf returns to role as long-standing sales professional

Ivyland PA - DDM Novastar is very happy to announce the return of John Malboeuf. After a brief departure from the industry and the company, John is excited to be back leading DDM Novastar’s business development, channel management and market support strategies, as the company’s Vice President of Global Sales.

Read More
search login