Save. Share. Connect.
Saturday, September 23, 2017
VOLUME -23 NUMBER 5
Publication Date: 05/1/2008
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Feature: Test and Measurement
Product Preview: EDS
May 2008 Issue
Add Message Board
Etco Intros Bench-Top Bender-Booter
Bender-booter assembly machine.
Warwick, RI — An air-powered, ergonomic bender-booter ignition wire assembly machine that can produce straight, 45 and 90° angled boots has been introduced by Etco. The Bender-Booter is a pneumatic, benchtop unit that applies a boot to a terminated ignition wire and bends it to produce angled or straight boots.
With dual palm-button actuation for operator safety, a user simply loads the terminated wire into the machine, loads the silicon rubber boot, presses the buttons and a finished assembly is ejected. Capable of processing up to 100 wire assemblies per hour, the machine measures 24 x 18-in. and replaces the company's line of foot pedal-operated booters. This semi-automatic machine is designed to bend and boot Etco CB2, CB3, AB16, CB8, AB15, and AB20 boots, along with DT2000LB, DT207LB, DT200B, DT250B, DT257B, SP19, and DT7B ignition terminals.
Contact: Etco Inc., 25 Bellows St., Warwick, RI 02888
401-467-2400 fax: 401-941-2453 E-mail: email@example.com Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM