HOMECURRENT ISSUEARCHIVEABOUT USSUBSCRIBEMEDIA KIT中文
Login


New Products
Search :      Friday, November 21, 2008


U.S. Tech Part Search



Powered by


Terms Of Use

 

 

 

 

 

Harsh-Environment Power Supplies from Lambda
Harsh environment power supplies.
San Diego, CA — Lambda has extended its 500-watt LZSa series of industrial power supplies to include 1000 and 1500-watt supplies with a unique feature set and safety-agency approvals not commonly found in standard off-the-shelf supplies. The new supplies have a wide operating temperature range, comply with MIL-STD-810E standards for shock and vibration, and can operate in explosive gas atmospheres.

The new LZSa1000 and LZSa1500 series supplies are suitable for use in a variety of applications such as factory automation, computing, ATE (automatic test equipment), petrochemical, control systems and COTS (commercial-off-the-shelf).

These rugged power supplies are available with a nominal output of 12V (LZSa1000) or 24V (LZSa1000/1500). They provide wide user-adjustment ranges of 10 to 15.75-volts and 18 to 29.4-volts respectively to accommodate non-standard voltage requirements. With integral fan-cooling they provide full-rated output power over the temperature range of -40 to +60°C, derating linearly to 60 percent load at 71°C ambient.

The LZSa supplies accept a wide input range from 85 to 265VAC, 47 to 440Hz and have active power factor and harmonic correction. They also comply with SEMI-F47 standards for input droop down to 100VAC at full load.

Output ripple and noise is 75mV peak-to-peak, and the unit is designed to provide 20-msec hold-up and ride-through to avoid nuisance tripping during transient electrical interruptions. The LZSa1000/1500 supplies are equipped with remote on/off, front panel mounted voltage adjust potentiometer, remote resistance or voltage programming and user-adjustable over-voltage protection. Status signals and controls include DC good, AC Fail, Inverter OK, 200kHz sync signal, and active current share. In addition, on the front panel a green LED indicates output-good and a red LED indicates an overvoltage or overtemperature condition. The supplies come in a compact 5.62 x 4.75 x 10.5-in. package and meet Class B EMI standards (both radiated and conducted) and are safety-approved to UL60950-1, EN60950-1, UL508, and Factory Mutual: FM3600, FM3611 and FM3810 specifications. They also comply with the Ring Wave Lighting Surge Test per IEEE C62.41 (6kV/30 Ohm, Criteria A) and Immunity Standards per EN61000-4-X. All units are RoHS-compliant and carry the CE Mark.

For more information, contact: About Lambda Americas, Inc., 3055 Del Sol Blvd., San Diego, CA 92154 800-526-2324 or 619-575-4400 fax: 619-429-1011. Web: http://www.lambdapower.com

 
 
search login