HOMECURRENT ISSUEARCHIVEABOUT USSUBSCRIBEMEDIA KIT中文
Login


Electronic Mfg. Products
Search :      Friday, November 21, 2008


U.S. Tech Part Search



Powered by


Terms Of Use

 

 

 

 

 

Rapid Ramp-Up IR Underheater from Manncorp
Infrared underheater for hand soldering.
Huntingdon Valley, PA — Manncorp has introduced a rapid IR underheater, a self-contained unit that safely boosts PC board preheat temperatures at the industry-mandated rate of 3.5°C/second and set temperatures are constantly maintained during soldering. With up to 50 percent of thermal energy from below for gentle background heat, temperature of solder tips is lowered by approximately 50°C, greatly reducing tip replacement frequency. In addition, overall soldering time is reduced, and components, pads and traces are fully protected from excessive heat. The rapid IR technology of Hot Beam 03 also makes traditional hand soldering risk-free. When shut down, it safely and instantly returns to touchable ambient temperature, instead of remaining at the potentially hazardous fixed temperatures of quartz or other heaters. The compact Hot Beam 03 is thermocouple profilable and stores 11 programs. It handles board sizes to 400 x 400mm (15.75 x 15.75-in.) and any thickness — even multi-layer boards, regardless of component density.

For more information, contact: Manncorp, 1840 County Line Rd., Huntingdon Valley, PA 19006 800-749-6266 or 215-364-6100 fax: 215-364-6110 E-mail: sales@manncorp.com Web: http://www.manncorp.com

 
 
search login