Save. Share. Connect.
Tuesday, June 27, 2017
VOLUME -23 NUMBER 2
Publication Date: 02/1/2008
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Feature: Components and Distribution
Product Preview: APEX
February 2008 Issue
Add Message Board
Dialight Intros New LED Indicators
Farmingdale, NJ — Dialight Corporation has introduced its 559 snap-in LED panel mount indicators, with high-brightness, daylight-viewable versions. Also offered are 5 and 12V indicators with integral resisters; low-current, high-efficiency indicators; and two- and three-leaded bicolor indicators. The RoHS-compliant, shock- and vibration-resistant indicators typically provide 100,000 hours of service, use 90 percent less energy than incandescent units, and generate no heat.
Front-panel, snap-in mounting requires no additional hardware. Available with AlInGaP and InGaN LEDs, the indicators are designed for a variety of applications, including main/remote power, maintenance/warnings and status indication, as well as
The indicators are supplied with straight terminals for wire wrapping or lead wires for soldering. Mounting hole size is 0.249 to 0.252-in. (6.32 to 6.40mm) in panel thicknesses of 0.031 to 0.062-in. (0.787 to 1.57mm). The indicators are housed in a black material that enhances LED contrast and meets the UL94V-0 flammability rating.
Available in red, green, yellow, orange, blue and white, the daylight-viewable indicators require current-limiting resistors and operate in the 2.1 to 3.5VDC range. They are supplied with either straight terminals or 6 or 14-in lead wires. Typical intensity ranges from 600 mcd for white to 3,100 mcd for yellow at maximum forward currents of 30 to 50mA.
The 5V and 12V indicators with integral resistors come in red, green and yellow with the same termination options. Typical intensity is 8mcd both at 10mA of current for 5V operation and at 13mA of current for 12V operation.
The bicolor indicators are available in red/green and yellow/green combinations, and include a three-leaded version for additional color variations.
Rated for 1.6 to 2.3VDC operation with current-limiting resistors, the indicators provide typical intensities ranging from 5/8 mcd for the three-leaded, red/green version at 10mA of current to 90/40 mcd for two-leaded red/green versions at 20mA of current.
The low-current, high-efficiency indicators are available in red, green, yellow and orange with low-current/diffused, high-efficiency/diffused and high-efficiency/non-tinted/non-diffused LEDs. Voltage requirements with current-limiting resistors are 1.8 to 2.3VDC. Typical intensities range from 1.8 mcd for low-current/diffused yellow/green to 140 mcd for high-efficiency/non-tinted/non-diffused yellow.
For more information, contact: Dialight Corp., 1501 Rt. 34 South, Farmingdale, NJ 07727
732-751-5828 fax: 732-751-3128 E-mail: email@example.com
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM