HOMECURRENT ISSUEARCHIVEABOUT USSUBSCRIBEMEDIA KIT中文
Login


Product Preview: ATExpo & IPC MW
Search :      Monday, December 01, 2008


U.S. Tech Part Search



Powered by


Terms Of Use

 

 

 

 

 

ACE Intros Selective Soldering with Internal Pre-Heat
Selective soldering system now has topside heating.
Spokane Valley, WA — ACE Production Technologies Inc. is showing selective soldering systems with internal (integral) Pre-heating modules for the first time. The internal preheat capability is designed for large, high-mass assemblies which are a challenge for selective soldering, where process heat is applied only to the bottom side of the assembly. The ability to apply continuous, real-time top-side pre-heating during the selective soldering process is critical to achieving good soldering results when processing such assemblies.

The new preheating capability promotes the draw of the solder through the barrel to the top side of the board, enhancing the formation of solder fillets on the top side. The implementation of internal continuous pre-heat, during the selective soldering process, improves thermal distribution and solderability of difficult assemblies. All of the show machines will also include Dual Flux heads — one spray and one drop-jet — a new flexible feature added earlier this year.

For more information, contact: A.C.E. Production Technologies, 5018 Marble Court, Spokane, WA 99206 509-924-4898 fax: 509-924-4898. Web: http://www.ace-protech.com

See at ATE Booth #6171.
See at IPC Midwest Booth #336.

 

search login