Wednesday, June 20, 2018
Publication Date:09/1/2007
Archive >  September 2007 Issue >  New Products > 
Agilent Intros Time-to-Digital Converter

Santa Clara, CA — Agilent Technologies Inc. has introduced the first time-to-digital converter (TDC) from its Acqiris product line, with six independent stopwatches for precise timing measurements from a common start event to multiple stop events at high resolution.Read More
Advanced: Test Point Pins

West Warwick, RI — Advanced Interconnections Corp. is offering a wide variety of standard and custom terminals for use as test point pins. The screw-machined pins reportedly offer superior durability over stamped-and-formed products while reducing assembly time and safety concerns. Read More
Multi-Axial Connector from Anderson

Sterling, MA — Anderson Power Products is introducing its Multi Axial Rotational Connector (MARC). Well suited to medical and mobility applications, the MARC is designed to mate while traveling through an arc with a 3-in. minimum radius. The MARC is rated to 30A and combines power, signal, and ground ...Read More
Anritsu Cuts Cost with Die-Cast Parts

Buena Park, CA — Anritsu has replaced traditionally machined RF shields with precision die cast parts in its handheld cable and antenna analyzers. The change is intended to reduce the unit cost of about a dozen different shields across the Site Master series of analyzers. Read More
200VAC Stepper Drives from Applied Motion

Watsonville, CA — Applied Motion Products STAC6-Q Stepper Drives are now available with current output from 0.5 to 3.2A with 220VAC input and reportedly provide software selectable resolutions from 200 to 51,200 steps/rev at speeds up to 50 rps. Read More
AST Introduces Two Low-Pressure Transmitters

Mt. Olive, NJ — American Sensor Technologies, Inc. (AST) has introduced two new advances in its pressure product line with the AST44LP and AST43LP low-pressure, hazardous area-approved pressure transmitters. The media-isolated, stainless steel units can perform in a variety of industrial applications ...Read More
Astrodyne Intros Compact Open-Frame Switchers

Mansfield MA — To meet the space and performance requirements for instrumentation, control, and telecommunication systems, Astrodyne Corporation has introduced the ASL150 Series of high density, open frame switching power supplies. Designed to deliver 150W of output power, these compact units exhibit ...Read More
B+K Intros 2 Low-Cost DDS Sweep Gens

Yorba Linda, CA — B+K Precision has introduced Models 4007DDS and 4013DDS Sweep Function Generators, which utilize an advanced Direct Digital Synthesis (DDS) design to generate quality waveforms with high signal precision and stability.Read More
BUD: First Stackable Plastic Enclosure

Cleveland, OH — Bud Industries, Inc. has introduced its first stackable plastic electronics enclosure. The new Plasticase Style H enclosures incorporate a unique interlocking design that allows them to be stacked several high without slipping. Read More
Calex Intros 3-Output DC/DC Converter

Concord, CA — Calex Mfg. has introduced the LT Series triple output DC/DC converters. The converters provide three fully independent and precisely regulated output voltages in a single compact package. Output voltages range from 5VDC to 1.5VDC. Input ranges of 18 to 36VDC and 36 to 75VDC are available ...Read More
Step-Down DC/DC Converter Core from Chipidea®

Campbell, CA — Chipidea® has introduced what it calls the industry's most compact, silicon-proven step-down DC/DC converter IP core of its type. It is designed to support an external supply voltage up to 4.2V while using regular 3.3V System-on-Chip (SoC) devices found in low-cost CMOS processes. Read More
RoHS 40A Automotive Relay from CIT

Minneapolis, MN — CIT Relay & Switch has released its upgraded automotive A9 Series relays. With new switching capacity to 40A, these automotive relays offer contact arrangement of NO SPST. Typical applications include automotive and lamp accessories control.Read More
Cognex Expands Wafer Reader Line

Natick, MA — Cognex Corporation has added the In-Sight 1720 model to its family of high-performance wafer readers. The In-Sight 1720 joins the 1721 and 1722 models to provide semiconductor fabs and equipment with automated wafer identification at every price point. Read More
New 3GHz VCO From Crystek Corp.

Fort Myers, FL — Crystek's newly introduced CVCO55CC-2970-3230 VCO operates from 2970MHz to 3230MHz with a control voltage range of 0.5V to 4.5V. This VCO has a typical phase noise of -104 dBc/Hz at 10kHz offset and has excellent linearity. Read More
Hi-Voltage Power Supplies from Diversified

Bedford, MA —Compact, fully integrated switching mode power supplies for large X-Ray inspection systems, particle accelerators, and radar applications are now available from Diversified Technologies, Inc.Read More
EAO: Stainless Steel Switches for Harsh Environments

Milford CT — A range of extremely durable stainless steel switches for use in harsh environments is now available from EAO. These stainless steel switches offer protection against water, dirt, chemicals, heat, shock and impact, which makes them especially suitable for operating equipment in polluted ...Read More
Tactile Switch & Pot Combo from Electro-Mech

South El Monte, CA — Electro-Mech's new SW44511 tactile feel momentary potentiometer switch offers both rotary and push-on functionality for maximum operation control. The compact all-in-one unit saves panel space in applications where there are tight design limitations. Read More
Keithley Intros Linux-Based Test Systems

Cleveland, OH — Keithley Instruments, Inc. has released a group of enhancements for its S600 Series Parametric Test Systems. The main enhancement is a migration to the Linux Operating System (OS) on the embedded control computer within each test system. This provides a more stable OS and longer service ...Read More
Kepco Power Supply Supports LXI

Kepco has introduced LXI (LAN eXtensions for Instrumentation) approved versions of its 1200 Watt, Hyperbolic limit, programmable KLP power supplies. Read More
2-in-1 Auto Blade Fuse Holders from Keystone

Astoria, NY — A new, high reliability and compact PC Auto Blade Fuse Holder, specially designed to accept standard and low profile "mini-size fuses" and hold them in place after multiple insertions, is now being offered by Keystone Electronics Corp. Thru-hole mountable to assure secure positioning ...Read More
search login