Save. Share. Connect.
Saturday, December 3, 2016
VOLUME -22 NUMBER 8
Publication Date: 08/1/2007
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Components & Disty
Product Preview: ATExpo & IPC MW
August 2007 Issue
Add Message Board
Fluke/Hart Intros Field Metrology Wells
Field metrology well.
American Fork, UT — Hart Scientific, a division of Fluke Corporation, has introduced the 9140 series Field Metrology Wells designed for optimum performance and functionality over the range of -25 to +661°C.
Unlike traditional field dry-wells, the new Field Metrology Wells maximize speed and portability without compromising key metrology performance criteria such as stability to ±0.01°C, radial uniformity to ±0.01°C, axial uniformity at 40mm to ±0.04°C, loading to ±0.006°C, and hysteresis to ±0.015°C. These units weigh about 16 lbs. and will reportedly reach 660°C in less than 15 minutes.
The Field Metrology Well "process" option makes possible a turn-key solution for field calibration. Each process version has a built-in reference thermometer readout that will accept reference probes with smart 6-pin DIN connectors which store probe characterization in the connector. The built-in reference readout has a second channel which will measure resistance, voltage, or 4-20 mA current. The process version provides 24V loop power for calibration of temperature transmitters. With every calibration, the process version of Field Metrology Wells can automate and document as-found and as-left data from the reference probe and the unit under test. Each unit has an LCD display and menu driven interface, and have a dedicated temperature set point and °C/°F buttons. Pre-programmed tasks and temperature points can easily be saved and recalled for route calibrations. All inputs and terminals are located on the front of the unit for easy access.
For more information, contact: Fluke Corp., P.O. Box 9090, Everett, WA 98206
888-492-7542 or 801-763-1600 fax: 425-446-5116 or 801-763-1010 E-mail: firstname.lastname@example.org email@example.com Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM