Saturday, May 28, 2016
Publication Date: 08/1/2007
ARCHIVE >  August 2007 Issue >  Product Preview: ATExpo & IPC MW > 
Top-side Preheater from ACE Helps Selective Soldering

Spokane Valley, WA — ACE Production Technologies is introducing a real-time top side pre-heating module that applies heat to the top side of the PC board during soldering. For high-mass assemblies, this top-side preheating promotes the draw of the solder through the barrel to the top side of the ...
Aegis & Practical Offer Plant Traceability Validation

Philadelphia, PA — Aegis Industrial Software Corporation and Practical Components Inc. have partnered to offer a new and innovative traceability and control kit designed to validate manufacturing process and provide the potential for rich product and process traceability detail. The kit is the first ...
ASG: Pneumatic Assembly Torque Arm

Cleveland, OH — A new heavy duty torque arm has been introduced by ASG, a division of Jergens, Inc. The new torque arm uses a pneumatic cylinder to assist movement of heavier tools. Torque arms improve production efficiencies and product quality by limiting the operator's influence on the assembly ...
Autosplice: Low-Cost SMA Wire Solenoids

San Diego, CA — Autosplice has developed new cost-effective solenoid-replacement designs for commercial applications using Shape Memory Alloy (SMA) wire. SMA wire, made from nickel titanium materials are used in solenoids that can be effectively used as simple, low-mass, low-power, low-cost alternatives ...
DEK's Virtual Panel Carrier Stays in Alignment

Flemington, NJ — DEK has developed Virtual Panel Carrier (VPC), describing it as a ground-breaking substrate centering and carrier technology. VPC enables multiple component support and alignment during screen printing and all subsequent assembly processes.
Eubanks Introduces New Large Cable Stripper

Ontario, CA — Eubanks Engineering Co. has introduced the Model 4040 Tandem-Cutterhead Large Cable Stripper, with a pneumatic drive that provides tremendous power for stripping tough insulations, such as cross-linked polyethylene, Teflon, Nylon, and other wrapped or extruded insulations. Its dual ...
Lista: Modular Workstation System

Holliston, MA — Lista International Corporation is showcasing its Arlink® 8000 Modular Workstation System — ergonomically designed to offer unlimited flexibility to accommodate changing or future needs. Especially suitable for assembly applications, the workstations can reportedly be assembled ...
Master Appliance: Flameless Heat Tool Kit

Racine, WI — Master Appliance Corp. is introducing its new UT-100Si-TC Ultratorch® Professional Heat Tool Kit, comprising the company's top performing UT-100Si Ultratorch. The Ultratorch is a self-igniting, butane powered, multi-functional soldering iron, flameless heat tool and hot knife, that ...
Auto Screwfeed & Driver from Nasco

Ft. Lauderdale, FL — The all pneumatic Nascomatic Screwmaster automated screwdriving system is especially suited for many assembly operations. No electricity is required.
Renishaw Upgrades Rotary Encoder-On-Chip

Hoffman Estates, IL — Renishaw is upgrading its 13-bit magnetic rotary encoder-on-chip to higher speeds, better noise control, improved time delay and accuracy, plus special performance tailoring capability. The enhanced RLS AM8192B encoder increases operational speeds to 38,000 rpm at 13-bit resolution ...
Saturn Upgrades its PCB Fabrication Lines

Romulus, MI — PC board fabricator Saturn Electronics has added two new Olec AT-30 automatic alignment registration exposure systems to its two systems already in place.
Schleuniger Intros Powerful Automatic Cutting Machine

Manchester, NH — Schleuniger has introduced the new PowerCut 3700, an automatic cutting machine for measuring and cutting larger round and flat materials. Its powerful pneumatic cutter head guarantees a clean, perpendicular cut and may be used for a wide range of applications. Belt drives provide ...
Seica: Legacy Replacement Testing Program

Strambino, Italy — While vintage ATE systems fade away, Seica's legacy ATE replacement solution retains the investment on a Seica Valid state-of-the-art platform. Seica has invested many man-years in creating migration tools necessary to take old programs and fixtures from major ATE companies and ...
Speedline Launches Enhanced Benchmark 2.0 Software

Franklin, MA — Speedline Technologies has launched Benchmark 2.0, the latest version of its proprietary machine operating software, which debuts on the MPM Accela printer. This new release reportedly offers significant post-print inspection enhancements, integration of bar code scanning for ...
Vitronics Soltec Jump Starts Reflow Profiling

Stratham, NH — A new feature developed by Vitronics Soltec in partnership with KIC — AUTOset, takes advantage of years of process knowledge developed in reflow profiling by both companies. AUTOset makes it possible for the manufacturing engineer to get a "jump start" on process development ...
Weller: Affordable Hot Air Station

Apex, NC — Cooper Hand Tools has introduced the new user-friendly Weller® WHA900 Hot Air Station, which provides high-end capabilities at a low cost.
search login

Click here to cancel

You were trying to view a protected page.
Please login to gain access or cancel to go back to the site.
User ID:  
Remember User Name
Stay signed in.

Forgot your password?