Save. Share. Connect.
Friday, September 22, 2017
VOLUME -22 NUMBER 6
Publication Date: 06/1/2007
Front Page News
People in the News
Contract Mfg. Products
Test & Measurement
Product Preview: Atlantic Design/MDM
June 2007 Issue
Add Message Board
Epoxy Preforms from Multiseals Remain Flexible
Manchester, CT — Multi-Seals' Uni-form
epoxy preforms , are now available in M5-82, a linear epoxy system that remains flexible under temperature changes. The post-cure flexibility of Epoxy M5-82 improves adhesion to component materials with dissimilar coefficients of thermal expansion. \par \The product was developed for under-the-hood automotive applications and other environments that require seal integrity under adverse temperature conditions.
Like all Uni-forms, M5-82 epoxy preforms are one-part epoxy resins that are solid at room temperature. When heated, the preforms melt and cure, forming a consistent seal that protects components from dust, moisture, oil, flux, solvents, conformal coatings, and other contaminants. Close tolerances on preform dimensions, consistent pre-mixed ratios of resin to catalyst, and consistent viscosity from beginning to end of batch ensure uniform, high-quality results. To accommodate diverse applications, Uni-forms are available in multiple configurations, with outside diameters as small as 0.035-in. (0.89mm) and as large as 0.720-in. (18.29mm). Preforms can be dispensed as rapidly as 200 to 600 parts per minute with little or no operator training, and extensive operator experience is not required to produce consistent results. Preforms also eliminate pot-life concerns and costly cleanup procedures.
For more information, contact: Multi-Seals Inc., 540 North Main Street, Manchester, CT 06042.
860-643-7188 fax: 860-643-5669. E-mail: firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM