Saturday, June 24, 2017
VOLUME - NUMBER
Advertisements
Archive >  December 2015 Issue >  New Products > 

12 Megapixel Camera from ISVI

Oxford, CT — ISVI Corporation, a manufacturer of high-speed, high-resolution cameras and technology, has released its IC-M125-CXP, a monochrome 12Mp CMOS camera with a CoaXPress CXP6, and DIN-4 interface delivering 181fps. The camera is based on the CMOSIS CMV12000 v2 high-sensitivity CMOS sensor ...
Read More

20W DC/DC Converters from Minmax

Hudson, MA — Minmax Power has introduced its MOW120C series, a family of regulated, fully-encapsulated DC/DC converters with a wide 4:1 input voltage range, extended operating temperature range of -40 to +90°C (-40 to +194°F), and easy mounting configurations for either chassis or DIN rail ...
Read More

75W DC/DC Converters from Calex

Concord, CA — Calex Manufacturing Company, Inc. has released its HE series isolated 75W triple output DC/DC converters. All HE models are housed in an industry standard half brick package. The input ranges available are 18 to 36V and 36 to 75VDC. Output voltages available are 3.3 and 5V as the primary ...
Read More

AEM Releases SMD Chip Fuses

San Diego, CA — AEM Components has released its latest series of fast-acting, thin-film SMD chip fuses, with current ratings from 0.15 to 5A. The company's thin-film process technology and alloy based metal fuse element design allow the T0603FF series fuse to combine low DCR and withstand high in ...
Read More

Altera BGA Socket from Ironwood

Eagan, MN — Ironwood Electronics has introduced a new BGA socket that addresses high-performance requirements for Altera's FPGA-CBT-BGA-6052. The contact is a stamped spring pin with 19g actuation force per ball, and rated with a cycle life of 125,000 insertions. Low force eliminates ball sticking ...
Read More

Ametherm Customizes Thermistor Assemblies

Carson City, NV — Ametherm now has the ability to completely customize its offering of NTC thermistor probe assemblies to meet the specific needs of any application. Designed and built in as little as two weeks, the units are an option for high-accuracy temperature sensing and measurement for IGBT ...
Read More

Anatech Intros RF Cable Assemblies

Garfield, NJ — Anatech Electronics has introduced a broad line of coaxial cable assemblies available as standard products that are fully customizable to meet customer requirements. All standard products can be purchased directly from the company's web store.
Read More

AV Security Pushbuttons from APEM

Vista, CA — APEM, a manufacturer of man-machine interface products, has launched three new models in its AV series of switches. The series is a robust and esthetic range of vandal-resistant pushbutton switches. Tested and qualified for impact resistance and sealing — IP and IK levels, these stainless ...
Read More

B&K Adds Four Programmable Loads

Yorba Linda, CA — B&K Precision has expanded its 8600 series with the addition of four programmable DC electronic load models: 8610, 8612, 8614, and 8616. With operating voltage ranges up to 500V, the new models bring a significant increase in power from 250 to 1500W, and a new offering capable of ...
Read More

Cable Connectors from Binder

Camarillo, CA — Binder has added its new M12 crimp style cable connectors to its product line. Designed to withstand vibration more effectively than screw and solder terminated connectors, the new crimp connection keeps a positive hold in extreme working conditions and high motion applications. ...
Read More

Cadence and imec Complete 5nm Chip Tapeout

Leuven, Belgium and San Jose, CA — Cadence Design Systems and nano-electronics research center imec have completed the tapeout of a 5nm test chip using extreme ultraviolet (EUV) as well as 193 immersion (193i) lithography. To produce this test chip, imec and Cadence tweaked design rules, libraries ...
Read More

Catalyst Creates Z-Theta Systems

Waterbury, CT — Catalyst Motion Group, a Haydon Kerk motion system integrator, has created a Z-Theta system from in-house branded products. These systems offer a compact and effective package to achieve rotary and linear axes in a single unit. In coordinated motion, it can then allow for helical ...
Read More

ConTech: 25W DC/DC Converters

Waterbury, CT — ConTech, a division of Calex, has released its QMZ series of DC/DC converters. The converters offer up to 25W of fully regulated output power, and a 4:1 input range with nominal input voltages of 24VDC and 48VDC. The single outputs offered are 3.3, 5, 12, and 15VDC. Dual outputs are ...
Read More

CUI: Wall Plug AC/DC Power Supplies

Tualatin, OR — CUI Inc. has released a new line of wall plug AC/DC power supplies for the US, Japanese, and European markets. The SWI6, SWI12, SWI18, and SWI24 with either North American or European input blades have been designed to meet the stringent average efficiency and no load power requirements ...
Read More

Custom Test Contactors from Yamaichi

Munich, Germany — Recent semiconductor devices, like wafer level CSPs for mobile applications have ball pitches of 0.35mm (0.014-in.), and the industry is trending toward even tighter pitches.
Read More

Divelbiss: OEM Controllers, IoT Ready

Fredericktown, OH — Divelbiss Corporation has introduced enhanced modes and expansion capabilities for the VB-2000 Versatile Base family of OEM controllers. The controllers are now cloud communication enabled with the the company's VersaCloud M2M platform. Programmed using the EZ Ladder Toolkit in ...
Read More

Electrostatic Field Meter from Static Solutions

Hudson, MA — Static Solutions, an ESD and cleanroom manufacturer, has introduced the Ohm-Stat FM-1126 Electrostatic Field Meter with an ionizer balance and polarity attachment. The field meter has an LCD bar graph digital display, 9V battery, focus ring range finder, and a microcomputer circuit. The device ...
Read More

Enclosed Miniature Switches from CW

Southampton, PA — CW Industries has developed a series of enclosed microminiature slide switches which are capable of switching up to 0.05A at 125VAC. The switches' contacts are completely sealed off from the outside for protection from hostile environments. These switches are microminiature in size ...
Read More

Energy Monitoring System from Ringdale

Georgetown, TX — Ringdale, Inc., a manufacturer of solid-state technologies, has introduced its CT Energy Monitor and Data Logger for single- or three-phase power systems. Energy and facility managers can use the system to monitor and detect a variety of power issues.
Read More

Exar: AC Step Driver for LED Bulbs

Fremont, CA — Exar Corporation, a supplier of high-performance integrated circuits and system solutions, has expanded its offering of AC step driver solutions for LED bulbs with the introduction of the XR46073. The new two-step LED current controller for AC step driving has improved line regulation ...
Read More
 
 
search login