Save. Share. Connect.
Friday, April 28, 2017
VOLUME - NUMBER
Front Page News
People in the News
Electronic Mfg. Services
Electronic Mfg. Products
Special Features: PCB and Test
Product Preview: productronica,The ASSEMBLY Show, IMAPS, MDM/Minneapolis
December 2015 Issue
Electronic Mfg. Products
Alpha: Soldering Systems and Solutions
Somerset, NJ — Alpha, a producer of electronics soldering materials, offers a variety of systems which aid the soldering process. Among the company's latest products are the Exactalloy
Preforms which are used to increase the solder volume in solder joints. The preforms increase the strength of the joints ...
Altest Uses Koh Young AOI System
Chandler, AZ — Altest Corporation, a California-based EMS provider, has added Koh Young's Zenith 3D AOI system to its SMT PCBA manufacturing process, adding 3D measurement and inspection capability for completed SMT assemblies. The Zenith is intended to help ensure product quality and full defect ...
American Standard Increases Quality with Software
Chicago, IL — American Standard Circuits has purchased a license for TrueChem's Process Control Software. The software allows the company to control its processes in a number of ways including scheduling test procedures and events, statistical record keeping, increasing security levels, and complete inventory ...
Austin America: Ultrasonic Stencil Cleaner
Burnet, TX — Austin American Technology (AAT) has introduced the Ultra-X, a semi-automatic ultrasonic stencil cleaner. In keeping with the company's standard of design, the new stencil cleaner comes with an array of useful features including a filtered, closed-loop, recirculated and heated aqueous ...
Compact Test Platform from JOT Automation
Oulu, Finland — JOT Automation, a supplier of test and assembly solutions, has introduced a modular test platform, the JOT M10 Test Concept, which enables the reliable testing of the full range of applications with a single platform on a factory floor. The unit automates functional, ICT, high voltage ...
Fujipoly Releases Low-Resistance Silver Connector
Carteret, NJ — The Fujipoly Series 5002 Silver Zebra
connector is an inexpensive and durable option for LCD to printed circuit board (PCB) connections. It is also an excellent choice as a board-to-board connector where space is limited. This connector delivers a current-carrying capacity up to ...
Full Range of Test Equipment from Seica
Strambino, Italy — Seica offers a complete range of solutions for board testing from printed circuits to the most complex assembled boards. The Pilot
V8 and Rapid 280 are both full, double-side testers, and they represent the company's best in flying probe technology for assembled boards ...
Hammond Releases Stainless Steel Wall-Mount Enclosures
Cheektowaga, NY — Stainless steel is the preferred enclosure material for use in the chemical, food and beverage, water treatment and allied industries. It offers good corrosion and chemical resistance, a durable finish that does not need painting, and high impact resistance.
Hemco: Containment Work Area
Independence, MO — Specifically designed for isolating hazardous materials, the Hazmax Containment Work Area from Hemco Corporation has been engineered to isolate applications including large equipment distillation procedures, pilot plant requirements, sampling, weighing, and dispensing operations ...
Hot-Melt Tape Adhesive from TE Connectivity
Schaffhausen, Switzerland, — TE Connectivity has introduced its Raychem S1260 Hot-Melt tape adhesive for high-temperature wire and cable repairs. The S1260 tape uses an environmentally resistant modified fluoropolymer for sealing high-temperature heat-shrink components to backshells, and is well ...
Improved Wire Harness Design System from Eplan
Monheim, Germany — Eplan has released its version 2.5 of the Harness proD. A wide range of enhancements for nail board design, cable routing and project management contribute to the effectiveness of the design program.
Indium Intros Thermal Interface Material
Clinton, NY — Indium Corp. has introduced a soft metal alloy thermal interface material (SMA TIM) which offers high and uniform thermal resistance at lower applied stresses in compressed interfaces.
Juki: Compact Substrate Inspection Machine
Morrisville, NC —Earlier this year, Juki Corporation released the compact PWB inspection machine RV-2. The system is a single-lane inspection machine with the same accurate inspection capability of the previous generation, RV-1.
LCD Soldering Stations from Aven
Ann Arbor, MI — Aven has introduced two LCD soldering stations with wide operating temperature ranges that are ESD safe for use with SMT components, audio equipment and radio-controlled devices. Each workbench station contains an iron holder, supply storage and a tip cleaner in its compact unit. ...
Nordson ASYMTEK Intros Spectrum II Jet Dispenser
Carlsbad, CA — Nordson ASYMTEK has introduced the Spectrum II
Premier with the IntelliJet
jetting system for dispensing small dot sizes at high frequencies without compromising the precision, high yield, and long-term reliability needed for advanced packaging applications. The IntelliJet system ...
Rehm: Cooling Zone Options for VisionX
Blaubeuren, Germany — Rehm Thermal Systems offers a wide range of cooling zone variants for reflow convection soldering with its VisionX range, which can be fine-tuned to suit different production processes. As well as the water-cooled standard solution with adjustable ventilation system, the company ...
Schurter Intros High Current Chokes
Santa Rosa, CA— Schurter has expanded its range of current compensated chokes with high current types for PCB mounting. The new DKIH series is available for single- and three-phase applications with rated currents from 10 to 50A. Due to its open design, the chokes are lightweight and compact, and suitable to ...
Shenmao: BGA and Micro BGA Solder Spheres
TaoYuan City, Taiwan — New from Shenmao are solder spheres for PBGA, CBGA, TBGA, CSP and Flip Chip Assemblies. The company has developed the new material using ultra micron technology (UMT) from pure metals produced to various alloy compositions — using Piezoelectric Droplet Jet Technology in high volumes ...
Stratasys: More Resins for 3D Printers
Eden Prairie, MN — Stratasys has released its Ultem
1010 resin for the Fortus 400mc and 450mc 3D production-level printing systems. This material has been available for the Fortus 900mc 3D Production System. Added to the company's material portfolio in 2014, this high-performance FDM thermoplastic ...
Techcon Brings Back Syringe Gun
Garden Grove, CA — Techcon Systems, a product group of OK International and a provider of fluid dispensing systems, has reintroduced the previously discontinued TS755SG Syringe Gun due to high demand from customers.
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | firstname.lastname@example.org
powered by GIM