Save. Share. Connect.
Tuesday, September 27, 2016
VOLUME - NUMBER
Switches & Relays
Add Message Board
Minmax Intros High Density 25W DC/DC Converter
Hi density DC/DC converter.
Hudson, MA — New from Minmax Power is the MJW25 Series of 25 Watt DC/DC converters housed in a compact 1 x 1-in. (2.54 x 2.54mm) shielded metal package. All models provide wide 2:1 input voltage ranges of 9-18VDC, 18-36VDC, or 36-75VDC, which convert to isolated, tightly regulated single or dual outputs of 3.3, 5, 12, or 15VDC. Dual outputs can be stacked to derive higher voltage, for outputs of 24 and 30VDC.
Highly efficient (90 percent), the MJW25 Series are specified to operate in environments with a temperature range from -40 to +80°C. Optional heat sinks are available for optimal high-temperature performance. These converters are well suited to applications in battery operated equipment, instrumentation, data communications, industrial or other applications where board space is at a premium. The pin layout of this compact 1 x 1-in. device matches that of larger 2 x 1-in. devices for an instant PCB real estate savings of 50 percent.
Input-to-output isolation is 1500VDC. Additional features include remote on/off, output voltage trim, and comprehensive protection circuitry (overload, over-voltage, and short-circuit). The MJW25 Series is approved to UL/cUL 60950-1 and IEC/EN 60950-1 standards.
Contact: Minmax Power, Inc., 43 Broad St., Hudson, MA 01749
978-567-9635 fax: 978-567-9601 E-mail: firstname.lastname@example.org Web:
© 2015 USTECH. All Rights Reserved. |
Contact Us: 610-783-6100 | email@example.com
powered by GIM