Round Lake, IL — Reaching 500°F (260°C), No. 813 is a gas-heated walk-in oven from Grieve that is currently used for curing printed circuit boards. 350,000 BTU/HR is installed in a modulating natural gas burner and workspace dimensions are 48-in. wide x 48-in. deep x 72-in. high (1.2 x 1.2 x 1.8m), making it a true walk-in for people less than 6-ft. tall.
|Walk-in gas-fired oven. |
The unit has 4-in. (21.4mm) insulated walls and an aluminized stainless steel interior and exterior. A 3300 CFM, 2-HP recirculating blower provides horizontal airflow to the oven. Safety equipment, such as a 325 CFM 1/3 powered force exhauster, is included as required by the IRI, FM and the National Fire Protection Association Standard 86 for gas-fired equipment. The oven also has a 2-in. (50.8mm) insulated floor with truck wheel guide tracks and a removable top-mounted heat chamber.
Controls onboard No. 813 include a recirculating blower airflow safety switch, circular chart temperature controller and a manual reset excess temperature controller.
Contact: The Grieve Corp., 500 Hart Road, Round Lake, IL 60073-2835 847-546-8225 fax: 847-546-9210 E-mail: firstname.lastname@example.org Web: http://www.grievecorp.com